Perspectives of Urban Growth Management and Sustainable Development In West Bank, Hebron District as a case Study

The main objective of this PhD research study is to provide a perspective on the urban growth management and sustainable development in Palestine, and more specifically in Hebron district as a case study. Hebron is located 36 km south of Jerusalem, with an overall population size of around 600,000 people living in a total area around1246km2. Hebron is the biggest Palestinian district that has 16 municipalities and 154 localities. The research discusses and analyzes the urban planning system, economical and environmental policies and the solution required to manage and integrate the development elements to develop a sustainable development plan for Hebron. The research provides answers for fundamental questions such as what kind and definition of sustainable development are applicable to the Palestinian case?. What are the sustainability problems there and how the Israeli occupation and unstable political condition affect the sustainable development in Palestine? What are the urban growth management and sustainability policies and actions required from government, public and privets sector in Palestine? The fast urban growth in Palestine is facing many problems and challenges due to the increase in the population size and the resulting impact of this increase including, but not limited to, the demand of new houses, need for more infrastructure services, demands on new industrial, commercial, educational and health projects, which in turn reduces the area of agricultural lands and threatens the natural resources and environment. There are also other associated sustainability problems like the absence of effective plans or regulations that control urban expansion, the absence of sufficient sustainable development plans at the national levels for the district, new job requirements, Israeli restrictions and occupation for more than 60 years, existence of construction factories near residential areas, poor public awareness and poor governmental funds for service projects and development plans. The study consists of nine chapters. Chapter One includes an introduction, study objectives, problems and justifications, while Chapter Two has a theoretical background on sustainability topic and definitions of sustainability. The Palestinian urban planning laws and local government systems are discussed in Chapter Three and the methodology of research is detailed in Chapter Four. As for Chapter Five, it provides a general background on Hebron District including demographical and economical profiles, along with recommendations related to sustainable development for each profile Chapter Six addresses the urban environment, sustainability priorities and policies required. Chapter Seven discusses and analyzes infrastructure services including transportation, water and wastewater. As for Chapter Eight, it addresses the land use, housing and urban expansion beside the cultural heritage, natural heritage with relevant sustainable development polices and recommendations. Finally, Chapter Nine includes a conclusion and comprehensive recommendations integrating all of urban and sustainability event in one map. Hebron has a deep history including a rich cultural heritage aged by thousands of years, with 47% of Hebron district population under 14 years old. Being the biggest Palestinian district, Hebron has thousands of industrial and economical organizations beside a large agricultural sector at Palestine level. This gives Hebron a potential to play major roles in developing a national sustainability plan, as the current urban planning system in Palestine needs urgent reform and development to fulfill the sustainability requirement. The municipalities and ministers should find permanent financial aid for urban planning and development studies so as to face future challenges. The Palestinian government can benefit from available local human resources in development projects; hence Palestinian people have sufficient qualifications in most sectors. The Palestinian people also can invest in the privet sector in Palestine in case businessmen have been encouraged and clear investment laws and plans have been developed. The study provides recommendations associated to the sustainable development in Palestine in general and Hebron, as a case study, in specific. Recommendations include increasing the privet sector as well as the public involvement in urban growth management, and stopping unplanned urban expansion, subjecting granting building permits of new projects to the no-harm environmental impact assessment, increasing the coordination and cooperation between localities and central bodies, protection and renovation of old cites and green areas, increasing the quality and quantity of infrastructure services, establishing district urban planning department to coordinate and organize urban planning and sustainable development activities. Also, among recommendations come dividing Hebron into three planning and administrative areas (north, central and south), and dividing the sustainable development and implementation period (2010 to 2025) into three main phases. Finally, the study strongly recommends benefiting from the same urban development plans in similar districts at national and international levels, also to use new technologies and information systems in urban planning process.

Konzeption von Entwicklungspfaden für Zulieferparks in der Automobilindustrie

Die Automobilindustrie reagiert mit Modularisierungsstrategien auf die zunehmende Produktkomplexität, getrieben durch die wachsenden Individualisierungsanforde-rungen auf der Kundenseite und der Modellpolitik mit neuen Fahrzeuganläufen. Die Hersteller verlagern die Materialbereitstellungskomplexität durch Outsourcing an die nächste Zulieferebene, den First Tier Suppliern, die seit Beginn der 90er Jahre zunehmend in Zulieferparks in unmittelbarer Werknähe integriert werden. Typische Merkmale eines klassischen Zulieferparks sind: Bereitstellung einer Halleninfrastruktur mit Infrastrukturdienstleistungen, Anlieferung der Teileumfänge im JIS-Verfahren (Just-in-Sequence = reihenfolgegenaue Synchronisation), lokale Wertschöpfung (Vormontagen, Sequenzierung) des Zulieferers, Vertragsbindung der First Tier Zulieferer für die Dauer eines Produktlebenszyklus und Einbindung eines Logistikdienstleisters. Teilweise werden zur Finanzierung Förderprojekte des öffent-lichen Sektors initiiert. Bisher fehlte eine wissenschaftliche Bearbeitung dieses Themas "Zulieferpark". In der Arbeit werden die in Europa entstandenen Zulieferparks näher untersucht, um Vor- und Nachteile dieses Logistikkonzeptes zu dokumentieren und Entwicklungs-trends aufzuzeigen. Abgeleitet aus diesen Erkenntnissen werden Optimierungs-ansätze aufgezeigt und konkrete Entwicklungspfade zur Verbesserung der Chancen-Risikoposition der Hauptakteure Automobilhersteller, Zulieferer und Logistikdienst-leister beschrieben. Die Arbeit gliedert sich in vier Haupteile, einer differenzierten Beschreibung der Ausgangssituation und den Entwicklungstrends in der Automobilindustrie, dem Vorgehensmodell, der Dokumentation der Analyseergebnisse und der Bewertung von Zulieferparkmodellen. Im Rahmen der Ergebnisdokumentation des Analyseteils werden vier Zulieferparkmodelle in detaillierten Fallstudien anschaulich dargestellt. Zur Erarbeitung der Analyseergebnisse wurde eine Befragung der Hauptakteure mittels strukturierten Fragebögen durchgeführt. Zur Erhebung von Branchentrends und zur relativen Bewertung der Parkmodelle wurden zusätzlich Experten befragt. Zur Segmentierung der Zulieferparklandschaft wurde die Methode der Netzwerk-analyse eingesetzt. Die relative Bewertung der Nutzenposition basiert auf der Nutzwertanalyse. Als Ergebnisse der Arbeit liegen vor: · Umfassende Analyse der Zulieferparklandschaft in Europa, · Segmentierung der Parks in Zulieferparkmodelle, Optimierungsansätze zur Verbesserung einer Win-Win-Situation der beteiligten Hauptakteure, · Relative Nutzenbewertung der Zulieferparkmodelle, · Entwicklungspfade für klassische Zulieferparks.

Landschaftsperspektiven der Nutzer

Die vorliegende Arbeit macht Vorschläge zur Einbindung der Öffentlichkeit in Planungsbestrebungen vor Ort, wobei vor allem Methoden empirischer Sozialforschung und deren Anwendbarkeit in landschaftsplanerischen Vorhaben näher betrachtet werden. Hiermit finden insbesondere Wertezuweisungen durch die Bürger stärkere Berücksichtigung. Es wird angenommen, dass, um eine zukunftsweisende Landschaftsplanung zu etablieren, Planer und Fachleute lernen müssen, wie die lokale Bevölkerung ihre Umwelt wahrnimmt und empfindet und welche Ideen sie für die zukünftige Entwicklung der Landschaft haben. Als empirische Grundlage werden Fallstudien aus Bad Soden am Taunus, Hamburg-Wilhelmsburg und Kassel-Rothenditmold präsentiert und verglichen. Rothenditmold und Wilhelmsburg zeichnen sich durch hohe Einwohneranteile mit Migrationshintergrund aus, weisen relativ hohe Arbeitslosenquoten auf und sind als soziale Brennpunkte bekannt – zumindest für Außenstehende. Beide Stadtteile versuchen ihr Image aufzuwerten. In Wilhelmsburg wird dieses Vorhaben in die großräumigen Veränderungen eingebunden, die von verschiedenen Hamburger Großprojekten ausstrahlen. In Rothenditmold ist vor allem Eigeninitiative durch den Stadtteil selbst gefragt. In Bad Soden gibt es ebenfalls viele Menschen mit ausländischen Wurzeln. Sie gehören allerdings mehrheitlich der gesellschaftlichen Mittel- und Oberschicht an. Bad Soden verfügt über ein insgesamt positives Image, das aller kulturellen Veränderungen zum Trotz beibehalten werden soll. Entsprechende Initiativen gehen hier ebenfalls von der Gemeinde selbst aus. An allen Standorten hat es drastische Landschaftsveränderungen und speziell deren Erscheinung gegeben. Bad Soden und Wilhelmsburg haben dabei Teile ihres vormals ländlichen Charakters zu bewahren, während in Rothenditmold vor allem Zeugnisse aus der Zeit der Industrialisierung erhalten sind und den Ort prägen. Die Landschaften haben jeweils ihre einzigartigen Erscheinungen. Zumindest Teile der Landschaften ermöglichen eine Identifikation, sind attraktiv und liefern gute Erholungsmöglichkeiten. Um diese Qualitäten zu bewahren, müssen sie entsprechend gepflegt und weiter entwickelt werden. Dazu sind die Interessen und Wünsche der Bewohner zu ermitteln und in Planungen einzuarbeiten. Die Arbeit strebt einen Beitrag zur Lebensraumentwicklung für und mit Menschen an, die mittels ausgewählter Methoden der empirischen Sozialforschung eingebunden werden. Dabei wird gezeigt, dass die vorgestellten und erprobten Methoden sinnvoll in Projekte der Landschaftsplanung eingebunden werden können. Mit ihnen können ergänzende Erkenntnisse zum jeweiligen Landschaftsraum gewonnen werden, da sie helfen, die kollektive Wahrnehmung der Landschaft durch die Bevölkerung zu erfassen, um sie anschließend in Planungsentwürfe einbinden zu können. Mit der Untersuchung wird in den drei vorgestellten Fallstudien exemplarisch erfasst, welche Elemente der Landschaft für die Bewohner von besonderer Bedeutung sind. Darüber hinaus lernen Planer, welche Methoden zur Ermittlung emotionaler Landschaftswerte verfügbar sind und auf welcher Ebene der Landschaftsplanung sowie bei welchen Zielgruppen sie eingesetzt werden können. Durch die Verknüpfung landschaftsplanerischer Erfassungsmethoden mit Methoden der empirischen Sozialwissenschaft (Fragebogen, Interviews, „Spaziergangsinterviews“, gemeinsame Erarbeitung von Projekten bis zur Umsetzung) sowie der Möglichkeit zur Rückkoppelung landschaftsplaneri-scher Entwürfe mit der Bevölkerung wird eine Optimierung dieser Entwürfe sowohl im Sinne der Planer als auch im Sinne der Bürger erreicht. Zusätzlich wird die Wahrnehmung teilnehmender Bevölkerung für ihre Umwelt geschärft, da sie aufgefordert wird, sich mit ihrer Lebensumgebung bewusst auseinander zu setzen. Die Ergebnisse dieser Untersuchung sind Beitrag und Beleg zu der Annahme, dass ergänzende Methoden in der Landschaftsplanung zur stärkeren Interessenberücksichtigung der von Planung betroffenen Menschen benötigt werden. Zudem zeigen die Studien auf, wie man dem planungsethischen Anspruch, die Öffentlichkeit einzubeziehen, näher kommt. Resultat sind eine bessere Bewertung und Akzeptanz der Planungen und das nicht nur aus landschaftsplanerisch-fachlicher Sicht. Landschaftsplaner sollten ein Interesse daran haben, dass ihre Entwürfe ernst genommen und akzeptiert werden. Das schaffen sie, wenn sie der Bevölkerung nicht etwas aufplanen, sondern ihnen entsprechende Einflussmöglichkeiten bieten und Landschaft mit ihnen gemeinsam entwickeln.

Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.

The prediction of seasonal and inter-annual climate variations and their impacts on the water resources in the eastern seaboard of Thailand

The research of this thesis dissertation covers developments and applications of short-and long-term climate predictions. The short-term prediction emphasizes monthly and seasonal climate, i.e. forecasting from up to the next month over a season to up to a year or so. The long-term predictions pertain to the analysis of inter-annual- and decadal climate variations over the whole 21st century. These two climate prediction methods are validated and applied in the study area, namely, Khlong Yai (KY) water basin located in the eastern seaboard of Thailand which is a major industrial zone of the country and which has been suffering from severe drought and water shortage in recent years. Since water resources are essential for the further industrial development in this region, a thorough analysis of the potential climate change with its subsequent impact on the water supply in the area is at the heart of this thesis research. The short-term forecast of the next-season climate, such as temperatures and rainfall, offers a potential general guideline for water management and reservoir operation. To that avail, statistical models based on autoregressive techniques, i.e., AR-, ARIMA- and ARIMAex-, which includes additional external regressors, and multiple linear regression- (MLR) models, are developed and applied in the study region. Teleconnections between ocean states and the local climate are investigated and used as extra external predictors in the ARIMAex- and the MLR-model and shown to enhance the accuracy of the short-term predictions significantly. However, as the ocean state – local climate teleconnective relationships provide only a one- to four-month ahead lead time, the ocean state indices can support only a one-season-ahead forecast. Hence, GCM- climate predictors are also suggested as an additional predictor-set for a more reliable and somewhat longer short-term forecast. For the preparation of “pre-warning” information for up-coming possible future climate change with potential adverse hydrological impacts in the study region, the long-term climate prediction methodology is applied. The latter is based on the downscaling of climate predictions from several single- and multi-domain GCMs, using the two well-known downscaling methods SDSM and LARS-WG and a newly developed MLR-downscaling technique that allows the incorporation of a multitude of monthly or daily climate predictors from one- or several (multi-domain) parent GCMs. The numerous downscaling experiments indicate that the MLR- method is more accurate than SDSM and LARS-WG in predicting the recent past 20th-century (1971-2000) long-term monthly climate in the region. The MLR-model is, consequently, then employed to downscale 21st-century GCM- climate predictions under SRES-scenarios A1B, A2 and B1. However, since the hydrological watershed model requires daily-scale climate input data, a new stochastic daily climate generator is developed to rescale monthly observed or predicted climate series to daily series, while adhering to the statistical and geospatial distributional attributes of observed (past) daily climate series in the calibration phase. Employing this daily climate generator, 30 realizations of future daily climate series from downscaled monthly GCM-climate predictor sets are produced and used as input in the SWAT- distributed watershed model, to simulate future streamflow and other hydrological water budget components in the study region in a multi-realization manner. In addition to a general examination of the future changes of the hydrological regime in the KY-basin, potential future changes of the water budgets of three main reservoirs in the basin are analysed, as these are a major source of water supply in the study region. The results of the long-term 21st-century downscaled climate predictions provide evidence that, compared with the past 20th-reference period, the future climate in the study area will be more extreme, particularly, for SRES A1B. Thus, the temperatures will be higher and exhibit larger fluctuations. Although the future intensity of the rainfall is nearly constant, its spatial distribution across the region is partially changing. There is further evidence that the sequential rainfall occurrence will be decreased, so that short periods of high intensities will be followed by longer dry spells. This change in the sequential rainfall pattern will also lead to seasonal reductions of the streamflow and seasonal changes (decreases) of the water storage in the reservoirs. In any case, these predicted future climate changes with their hydrological impacts should encourage water planner and policy makers to develop adaptation strategies to properly handle the future water supply in this area, following the guidelines suggested in this study.