A generic polynomial solution for the differential equation of hypergeometric type and six sequences of orthogonal polynomials related to it

In this work, we present a generic formula for the polynomial solution families of the well-known differential equation of hypergeometric type s(x)y"n(x) + t(x)y'n(x) - lnyn(x) = 0 and show that all the three classical orthogonal polynomial families as well as three finite orthogonal polynomial families, extracted from this equation, can be identified as special cases of this derived polynomial sequence. Some general properties of this sequence are also given.

Das professionelle Handlungswissen von DaZ-Lehrenden in der Erwachsenenbildung am Beispiel Binnendifferenzierung : eine qualitative Studie

Das Forschungsfeld der vorliegenden Arbeit sind die Deutsch als Zweitsprache-Kurse, die im Zeitraum der Untersuchung (2002) noch vom Sprachverband Deutsch (vormals: für ausländische Arbeitnehmer) unterstützt wurden. Da sich mit diesem wichtigen und breiten Anwendungsgebiet der Fremdsprachendidaktik bisher nur wenige Studien beschäftigt haben, ist als Forschungsansatz eine explorativ-qualitative Herangehensweise gewählt worden. Die Kurse für erwachsene Einwanderer zeichnen sich durch eine große Heterogenität der Teilnehmenden aus, dementsprechend ist die zentrale Fragestellung der Studie, in der das professionelle Handlungswissen von Lehrenden erforscht wird, die Frage der Binnendifferenzierung. Ausgehend von bereits seit den siebziger Jahren des 20. Jahrhunderts vorliegenden allgemeindidaktischen Entwürfen zur Arbeit mit heterogenen Lerngruppen, in denen das Prinzip der Binnendifferenzierung entwickelt wird, werden im ersten Teil der Arbeit didaktische Möglichkeiten der Binnendifferenzierung im Deutsch als Zweitsprache-Unterricht entworfen. Ausgehend von diesem Vorverständnis ist dann die Befragung der Lehrenden durchgeführt worden, die im zweiten Teil der Arbeit dargestellt, ausgewertet und diskutiert wird. Dabei geht es nicht um eine Evaluation der Praxis anhand vorgefasster Kategorien, sondern im Gegenteil um eine explorative Erforschung des Problembereiches der Arbeit mit heterogenen Lerngruppen im Deutsch als Zweitsprache Unterricht. Anhand der am Material entwickelten Kategorien werden zentrale didaktische Gesichtspunkte herausgearbeitet, die charakteristisch für das Forschungsfeld Deutsch als Zweitsprache mit erwachsenen Einwanderern sind. Diese Kategorien sind nicht deckungsgleich mit denen, die durch die hermeneutisch orientierte Vorgehensweise im ersten Teil der Arbeit entwickelt werden konnten. Anhand dieser Diskrepanz wird das Theorie-Praxis-Verhältnis der didaktischen Forschung und Lehre aufgeschlüsselt und kritisch betrachtet. Ausblick der Arbeit ist der Verweis auf die Professionalisierungsdebatte und die Notwendigkeit einer praxisbezogenen Forschung, welche die Bedürfnisse von Lehrenden direkt einbezieht und im Sinne einer Aktionsforschung gleichzeitig zur Weiterbildung der Lehrenden beiträgt. Nur auf diesem Weg kann die Unterrichtspraxis unmittelbar weiter entwickelt werden. Aus der vorliegenden Studie ergeben sich viel versprechende Anknüpfungspunkte für kooperative Aktionsforschungsprojekte, die von den Lehrenden in den Interviews angeregt werden.

A generic formula for the values at the boundary points of monic classical orthogonal polynomials

In a previous paper we have determined a generic formula for the polynomial solution families of the well-known differential equation of hypergeometric type σ(x)y"n(x)+τ(x)y'n(x)-λnyn(x)=0. In this paper, we give another such formula which enables us to present a generic formula for the values of monic classical orthogonal polynomials at their boundary points of definition.

Design, implementation and application of a generic framework for integrated regional land-use modeling

Land use is a crucial link between human activities and the natural environment and one of the main driving forces of global environmental change. Large parts of the terrestrial land surface are used for agriculture, forestry, settlements and infrastructure. Given the importance of land use, it is essential to understand the multitude of influential factors and resulting land use patterns. An essential methodology to study and quantify such interactions is provided by the adoption of land-use models. By the application of land-use models, it is possible to analyze the complex structure of linkages and feedbacks and to also determine the relevance of driving forces. Modeling land use and land use changes has a long-term tradition. In particular on the regional scale, a variety of models for different regions and research questions has been created. Modeling capabilities grow with steady advances in computer technology, which on the one hand are driven by increasing computing power on the other hand by new methods in software development, e.g. object- and component-oriented architectures. In this thesis, SITE (Simulation of Terrestrial Environments), a novel framework for integrated regional sland-use modeling, will be introduced and discussed. Particular features of SITE are the notably extended capability to integrate models and the strict separation of application and implementation. These features enable efficient development, test and usage of integrated land-use models. On its system side, SITE provides generic data structures (grid, grid cells, attributes etc.) and takes over the responsibility for their administration. By means of a scripting language (Python) that has been extended by language features specific for land-use modeling, these data structures can be utilized and manipulated by modeling applications. The scripting language interpreter is embedded in SITE. The integration of sub models can be achieved via the scripting language or by usage of a generic interface provided by SITE. Furthermore, functionalities important for land-use modeling like model calibration, model tests and analysis support of simulation results have been integrated into the generic framework. During the implementation of SITE, specific emphasis was laid on expandability, maintainability and usability. Along with the modeling framework a land use model for the analysis of the stability of tropical rainforest margins was developed in the context of the collaborative research project STORMA (SFB 552). In a research area in Central Sulawesi, Indonesia, socio-environmental impacts of land-use changes were examined. SITE was used to simulate land-use dynamics in the historical period of 1981 to 2002. Analogous to that, a scenario that did not consider migration in the population dynamics, was analyzed. For the calculation of crop yields and trace gas emissions, the DAYCENT agro-ecosystem model was integrated. In this case study, it could be shown that land-use changes in the Indonesian research area could mainly be characterized by the expansion of agricultural areas at the expense of natural forest. For this reason, the situation had to be interpreted as unsustainable even though increased agricultural use implied economic improvements and higher farmers' incomes. Due to the importance of model calibration, it was explicitly addressed in the SITE architecture through the introduction of a specific component. The calibration functionality can be used by all SITE applications and enables largely automated model calibration. Calibration in SITE is understood as a process that finds an optimal or at least adequate solution for a set of arbitrarily selectable model parameters with respect to an objective function. In SITE, an objective function typically is a map comparison algorithm capable of comparing a simulation result to a reference map. Several map optimization and map comparison methodologies are available and can be combined. The STORMA land-use model was calibrated using a genetic algorithm for optimization and the figure of merit map comparison measure as objective function. The time period for the calibration ranged from 1981 to 2002. For this period, respective reference land-use maps were compiled. It could be shown, that an efficient automated model calibration with SITE is possible. Nevertheless, the selection of the calibration parameters required detailed knowledge about the underlying land-use model and cannot be automated. In another case study decreases in crop yields and resulting losses in income from coffee cultivation were analyzed and quantified under the assumption of four different deforestation scenarios. For this task, an empirical model, describing the dependence of bee pollination and resulting coffee fruit set from the distance to the closest natural forest, was integrated. Land-use simulations showed, that depending on the magnitude and location of ongoing forest conversion, pollination services are expected to decline continuously. This results in a reduction of coffee yields of up to 18% and a loss of net revenues per hectare of up to 14%. However, the study also showed that ecological and economic values can be preserved if patches of natural vegetation are conservated in the agricultural landscape. -----------------------------------------------------------------------

Qualitative und quantitative Schwingungsmessung und -analyse mittels Digital-Shearografie

Speckle Pattern Shearing Interferometrie (Shearografie) ist eine speckle-interferometrische Messmethode und zeichnet sich durch die ganzflächige, berührungslose Arbeitsweise, hohe räumliche Auflösung und hohe Messempfindlichkeit aus. Diese Dissertation beinhaltet die neue bzw. weitere Entwicklung der Shearografie zur qualitativen Schwingungsbeobachtung und zur quantitativen Schwingungsmessung. Für die qualitative Schwingungsbeobachtung in Echtzeit werden die Optimierung des Zeitmittelungsverfahrens und die neue entwickelte Online-Charakterisierung von Streifenmustern mit statistischen Verfahren vorgestellt. Auf dieser Basis können sowohl eine genaue Fehlstellen-Detektion bei der zerstörungsfreien Materialprüfung als auch eine präzise Resonanzuntersuchung zeitsparend und vollautomatisch durchgeführt werden. Für die quantitative Schwingungsmessung wird eine sog. dynamische Phasenschiebe-Technik neu entwickelt, welche durch die Einführung eines synchron zum Objekt schwingenden Referenzspiegels realisiert wird. Mit dieser Technik ermöglicht das Zeitmittelungsverfahren die Amplituden und Phasen einer Objektschwingung quantitativ zu ermitteln. Auch eine Weiterentwicklung des stroboskopischen Verfahrens in Kombination mit zeitlicher Phasenverschiebung wird in der Arbeit präsentiert, womit der gesamte Prozess der Schwingungsmessung und -rekonstruktion beschleunigt und automatisch durchgeführt wird. Zur Bestimmung des Verschiebungsfeldes aus den gemessenen Amplituden und Phasen des Verformungsgradienten stellt diese Arbeit auch eine Weiterentwicklung des Summationsverfahrens vor. Das Verfahren zeichnet sich dadurch aus, dass die Genauigkeit des ermittelten Verschiebungsfelds unabhängig von der Sheargröße ist und gleichzeitig das praktische Problem - Unstetigkeit - gelöst wird. Eine quantitative Messung erfordert eine genaue Kalibrierung der gesamten Messkette. Ein auf dem Least-Square-Verfahren basierendes Kalibrierverfahren wird in der Arbeit zur Kalibrierung der statischen und dynamischen Phasenverschiebung vorgestellt. Auch die Ermittelung der Sheargröße mit Hilfe der 1D- bzw. 2D-Kreuz-Korrelation wird präsentiert. Zum Schluss wurde die gesamte Entwicklung durch eine Vergleichsmessung mit einem handelsüblichen Scanning-Laser-Doppler-Vibrometer experimentell verifiziert.

Qualitative Sozialforschung

Anhand verschiedener Auswertungen eines Interviews wird die Problematik, die sich aus der Subjektivität der einzelnen Interviewer ergibt, dargestellt. Ohne die Bedeutung von qualitativen Methoden abstreiten zu wollen, soll dadurch klar werden, in welche "Fallen" Interviewer und Auswerter laufen können, wenn sie sich allzu naiv auf ihre Konstruktionen stützen.

Generic Finite Element Model for Mechanically Consistent Scaling of Composite Beam-to-column Joint with Welded Connection

To study the behaviour of beam-to-column composite connection more sophisticated finite element models is required, since component model has some severe limitations. In this research a generic finite element model for composite beam-to-column joint with welded connections is developed using current state of the art local modelling. Applying mechanically consistent scaling method, it can provide the constitutive relationship for a plane rectangular macro element with beam-type boundaries. Then, this defined macro element, which preserves local behaviour and allows for the transfer of five independent states between local and global models, can be implemented in high-accuracy frame analysis with the possibility of limit state checks. In order that macro element for scaling method can be used in practical manner, a generic geometry program as a new idea proposed in this study is also developed for this finite element model. With generic programming a set of global geometric variables can be input to generate a specific instance of the connection without much effort. The proposed finite element model generated by this generic programming is validated against testing results from University of Kaiserslautern. Finally, two illustrative examples for applying this macro element approach are presented. In the first example how to obtain the constitutive relationships of macro element is demonstrated. With certain assumptions for typical composite frame the constitutive relationships can be represented by bilinear laws for the macro bending and shear states that are then coupled by a two-dimensional surface law with yield and failure surfaces. In second example a scaling concept that combines sophisticated local models with a frame analysis using a macro element approach is presented as a practical application of this numerical model.

Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.