Modelling and simulation of a photovoltaic fuel cell hybrid system

A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.

Methodische Grundlagen zur Bewahrung und Wiederherstellung großräumig funktionsfähiger ökologischer Beziehungen in der räumlichen Umweltplanung

Mit der Verwirklichung ,Ökologischer Netzwerke‘ werden Hoffnungen zum Stopp des Verlustes der biologischen Vielfalt verknüpft. Sowohl auf gesamteuropäischer Ebene (Pan-European Ecological Network - PEEN) als auch in den einzelnen Staaten entstehen Pläne zum Aufbau von Verbundsystemen. Im föderalen Deutschland werden kleinmaßstäbliche Biotopverbundplanungen auf Landesebene aufgestellt; zum nationalen Biotopverbund bestehen erste Konzepte. Die vorliegende Arbeit ist auf diese überörtlichen, strategisch vorbereitenden Planungsebenen ausgerichtet. Ziele des Verbunds sind der Erhalt von Populationen insbesondere der gefährdeten Arten sowie die Ermöglichung von Ausbreitung und Wanderung. Aufgrund fehlender Datengrundlagen zu den Arten und Populationen ist es nicht ohne weiteres möglich, die Konzepte und Modelle der Populationsökologie in die überörtlichen Planungsebenen zu übertragen. Gemäß der o.g. Zielstellungen sollte sich aber die Planung von Verbundsystemen an den Ansprüchen der auf Verbund angewiesenen Arten orientieren. Ziel der Arbeit war die Entwicklung einer praktikablen GIS-gestützten Planungshilfe zur größtmöglichen Integration ökologischen Wissens unter der Bedingung eingeschränkter Informationsverfügbarkeit. Als Grundlagen dazu werden in Übersichtsform zunächst die globalen, europäisch-internationalen und nationalen Rahmenbedingungen und Anforderungen bezüglich des Aufbaus von Verbundsystemen zusammengestellt. Hier sind die Strategien zum PEEN hervorzuheben, die eine Integration ökologischer Inhalte insbesondere durch die Berücksichtigung räumlich-funktionaler Beziehungen fordern. Eine umfassende Analyse der landesweiten Biotopverbundplanungen der BRD zeigte die teilweise erheblichen Unterschiede zwischen den Länderplanungen auf, die es aktuell nicht ermöglichen, ein schlüssiges nationales Konzept zusammenzufügen. Nicht alle Länder haben landesweite Biotopverbundplanungen und Landeskonzepte, bei denen dem geplanten Verbund die Ansprüche von Arten zugrunde gelegt werden, gibt es nur ansatzweise. Weiterhin wurde eine zielgerichtete Eignungsprüfung bestehender GIS-basierter Modelle und Konzepte zum Verbund unter Berücksichtigung der regelmäßig in Deutschland verfügbaren Datengrundlagen durchgeführt. Da keine integrativen regelorientierten Ansätze vorhanden waren, wurde der vektorbasierte Algorithmus HABITAT-NET entwickelt. Er arbeitet mit ,Anspruchstypen‘ hinsichtlich des Habitatverbunds, die stellvertretend für unterschiedliche ökologische Gruppen von (Ziel-) Arten mit terrestrischer Ausbreitung stehen. Kombiniert wird die Fähigkeit zur Ausbreitung mit einer Grobtypisierung der Biotopbindung. Die wichtigsten Grundlagendaten bilden die jeweiligen (potenziellen) Habitate von Arten eines Anspruchstyps sowie die umgebende Landnutzung. Bei der Bildung von ,Lebensraumnetzwerken‘ (Teil I) werden gestufte ,Funktions- und Verbindungsräume‘ generiert, die zu einem räumlichen System verknüpft sind. Anschließend kann die aktuelle Zerschneidung der Netzwerke durch Verkehrstrassen aufgezeigt werden, um darauf aufbauend prioritäre Abschnitte zur Wiedervernetzung zu ermitteln (Teil II). Begleitend wird das Konzept der unzerschnittenen Funktionsräume (UFR) entworfen, mit dem die Indikation von Habitatzerschneidung auf Landschaftsebene möglich ist. Diskutiert werden schließlich die Eignung der Ergebnisse als kleinmaßstäblicher Zielrahmen, Tests zur Validierung, Vergleiche mit Verbundplanungen und verschiedene Setzungen im GIS-Algorithmus. Erläuterungen zu den Einsatzmöglichkeiten erfolgen beispielsweise für die Bereiche Biotopverbund- und Landschaftsplanung, Raumordnung, Strategische Umweltprüfung, Verkehrswegeplanung, Unterstützung des Konzeptes der Lebensraumkorridore, Kohärenz im Schutzgebietssystem NATURA 2000 und Aufbau von Umweltinformationssystemen. Schließlich wird ein Rück- und Ausblick mit der Formulierung des weiteren Forschungsbedarfs verknüpft.

Perspectives of Urban Growth Management and Sustainable Development In West Bank, Hebron District as a case Study

The main objective of this PhD research study is to provide a perspective on the urban growth management and sustainable development in Palestine, and more specifically in Hebron district as a case study. Hebron is located 36 km south of Jerusalem, with an overall population size of around 600,000 people living in a total area around1246km2. Hebron is the biggest Palestinian district that has 16 municipalities and 154 localities. The research discusses and analyzes the urban planning system, economical and environmental policies and the solution required to manage and integrate the development elements to develop a sustainable development plan for Hebron. The research provides answers for fundamental questions such as what kind and definition of sustainable development are applicable to the Palestinian case?. What are the sustainability problems there and how the Israeli occupation and unstable political condition affect the sustainable development in Palestine? What are the urban growth management and sustainability policies and actions required from government, public and privets sector in Palestine? The fast urban growth in Palestine is facing many problems and challenges due to the increase in the population size and the resulting impact of this increase including, but not limited to, the demand of new houses, need for more infrastructure services, demands on new industrial, commercial, educational and health projects, which in turn reduces the area of agricultural lands and threatens the natural resources and environment. There are also other associated sustainability problems like the absence of effective plans or regulations that control urban expansion, the absence of sufficient sustainable development plans at the national levels for the district, new job requirements, Israeli restrictions and occupation for more than 60 years, existence of construction factories near residential areas, poor public awareness and poor governmental funds for service projects and development plans. The study consists of nine chapters. Chapter One includes an introduction, study objectives, problems and justifications, while Chapter Two has a theoretical background on sustainability topic and definitions of sustainability. The Palestinian urban planning laws and local government systems are discussed in Chapter Three and the methodology of research is detailed in Chapter Four. As for Chapter Five, it provides a general background on Hebron District including demographical and economical profiles, along with recommendations related to sustainable development for each profile Chapter Six addresses the urban environment, sustainability priorities and policies required. Chapter Seven discusses and analyzes infrastructure services including transportation, water and wastewater. As for Chapter Eight, it addresses the land use, housing and urban expansion beside the cultural heritage, natural heritage with relevant sustainable development polices and recommendations. Finally, Chapter Nine includes a conclusion and comprehensive recommendations integrating all of urban and sustainability event in one map. Hebron has a deep history including a rich cultural heritage aged by thousands of years, with 47% of Hebron district population under 14 years old. Being the biggest Palestinian district, Hebron has thousands of industrial and economical organizations beside a large agricultural sector at Palestine level. This gives Hebron a potential to play major roles in developing a national sustainability plan, as the current urban planning system in Palestine needs urgent reform and development to fulfill the sustainability requirement. The municipalities and ministers should find permanent financial aid for urban planning and development studies so as to face future challenges. The Palestinian government can benefit from available local human resources in development projects; hence Palestinian people have sufficient qualifications in most sectors. The Palestinian people also can invest in the privet sector in Palestine in case businessmen have been encouraged and clear investment laws and plans have been developed. The study provides recommendations associated to the sustainable development in Palestine in general and Hebron, as a case study, in specific. Recommendations include increasing the privet sector as well as the public involvement in urban growth management, and stopping unplanned urban expansion, subjecting granting building permits of new projects to the no-harm environmental impact assessment, increasing the coordination and cooperation between localities and central bodies, protection and renovation of old cites and green areas, increasing the quality and quantity of infrastructure services, establishing district urban planning department to coordinate and organize urban planning and sustainable development activities. Also, among recommendations come dividing Hebron into three planning and administrative areas (north, central and south), and dividing the sustainable development and implementation period (2010 to 2025) into three main phases. Finally, the study strongly recommends benefiting from the same urban development plans in similar districts at national and international levels, also to use new technologies and information systems in urban planning process.