Development of hybrid UV VCSEL with organic active material and dielectric DBR mirrors for medical, sensoric and data storage applications

Lasers play an important role for medical, sensoric and data storage devices. This thesis is focused on design, technology development, fabrication and characterization of hybrid ultraviolet Vertical-Cavity Surface-Emitting Lasers (UV VCSEL) with organic laser-active material and inorganic distributed Bragg reflectors (DBR). Multilayer structures with different layer thicknesses, refractive indices and absorption coefficients of the inorganic materials were studied using theoretical model calculations. During the simulations the structure parameters such as materials and thicknesses have been varied. This procedure was repeated several times during the design optimization process including also the feedback from technology and characterization. Two types of VCSEL devices were investigated. The first is an index coupled structure consisting of bottom and top DBR dielectric mirrors. In the space in between them is the cavity, which includes active region and defines the spectral gain profile. In this configuration the maximum electrical field is concentrated in the cavity and can destroy the chemical structure of the active material. The second type of laser is a so called complex coupled VCSEL. In this structure the active material is placed not only in the cavity but also in parts of the DBR structure. The simulations show that such a distribution of the active material reduces the required pumping power for reaching lasing threshold. High efficiency is achieved by substituting the dielectric material with high refractive index for the periods closer to the cavity. The inorganic materials for the DBR mirrors have been deposited by Plasma- Enhanced Chemical Vapor Deposition (PECVD) and Dual Ion Beam Sputtering (DIBS) machines. Extended optimizations of the technological processes have been performed. All the processes are carried out in a clean room Class 1 and Class 10000. The optical properties and the thicknesses of the layers are measured in-situ by spectroscopic ellipsometry and spectroscopic reflectometry. The surface roughness is analyzed by atomic force microscopy (AFM) and images of the devices are taken with scanning electron microscope (SEM). The silicon dioxide (SiO2) and silicon nitride (Si3N4) layers deposited by the PECVD machine show defects of the material structure and have higher absorption in the ultra violet range compared to ion beam deposition (IBD). This results in low reflectivity of the DBR mirrors and also reduces the optical properties of the VCSEL devices. However PECVD has the advantage that the stress in the layers can be tuned and compensated, in contrast to IBD at the moment. A sputtering machine Ionsys 1000 produced by Roth&Rau company, is used for the deposition of silicon dioxide (SiO2), silicon nitride (Si3N4), aluminum oxide (Al2O3) and zirconium dioxide (ZrO2). The chamber is equipped with main (sputter) and assisted ion sources. The dielectric materials were optimized by introducing additional oxygen and nitrogen into the chamber. DBR mirrors with different material combinations were deposited. The measured optical properties of the fabricated multilayer structures show an excellent agreement with the results of theoretical model calculations. The layers deposited by puttering show high compressive stress. As an active region a novel organic material with spiro-linked molecules is used. Two different materials have been evaporated by utilizing a dye evaporation machine in the clean room of the department Makromolekulare Chemie und Molekulare Materialien (mmCmm). The Spiro-Octopus-1 organic material has a maximum emission at the wavelength λemission = 395 nm and the Spiro-Pphenal has a maximum emission at the wavelength λemission = 418 nm. Both of them have high refractive index and can be combined with low refractive index materials like silicon dioxide (SiO2). The sputtering method shows excellent optical quality of the deposited materials and high reflection of the multilayer structures. The bottom DBR mirrors for all VCSEL devices were deposited by the DIBS machine, whereas the top DBR mirror deposited either by PECVD or by combination of PECVD and DIBS. The fabricated VCSEL structures were optically pumped by nitrogen laser at wavelength λpumping = 337 nm. The emission was measured by spectrometer. A radiation of the VCSEL structure at wavelength 392 nm and 420 nm is observed.

Gaseous and leaching losses of carbon and nitrogen in irrigated organic farming of a coastal oasis in Oman

In der Dissertation wurden die Effekte verschiedener C/N-Verhältnisse und verschiedener Verhältnisse von strukturellen zu löslichen Kohlenhydraten (NDF/SC) von Dung, der in bewässerten Gemüsekulturen im Norden Omans appliziert wurde, untersucht. Im auf sandigen Böden durchgeführten Experiment wurden zwei Büffeldungvarianten zum einen mit einem C/N-Verhältnis von 19 und einem NDF/SC-Verhältnis von 17 (ORG1) und zum anderen mit einem C/N-Verhältnis von 25 und einem NDF/SC-Verhältnis von 108 (ORG2) verwendet. Das relevante faktorielle Anbausystem war eine zweijährige Rotation, bestehend aus Rettich gefolgt von Blumenkohl und Karotte. Eine signifikante Zunahme der Erträge, des Sproßdurchmessers und der Pflanzenhöhe von Blumenkohl (P<0,001) sowie der Konzentration von Askorbinsäure in den Wurzeln von Rettich (P<0,01) mit erhöhter Verfügbarkeit von N, P und K von ORG2 über ORG1 bis hin zur Mineraldünger-Kontrollbehandlung (MIN) konnte festgestellt werden. Innerhalb von 260 Tagen wurden für die gesamte Anbauperiode mit einem photoakustischen Infrarot-Multigasmonitor und einer damit verbundenen Haube bodenbürtige Gasemissionen gemessen. Die errechneten Nettobilanzen zeigten Überschüsse von N und P, welche von Defiziten für K begleitet waren. Die Kohlenstoff Nettobilanzen waren während des Untersuchungszeitraums negativ oder nicht konsistent. Die Ergebnisse zeigen, dass unter extremen klimatischen Bedingungen bewässerter sandiger Böden organische Kultivierung zuerst durch den Kohlenstoffgehalt von Dung und Boden und erst dann durch die applizierten Mengen an N, P und K limitiert wird. Es konnte festgestellt werden, dass Gasemissionen den größten Teil der N und C Verluste von bewässerten sandigen Böden im Norden Omans darstellen. Die Reduzierung von Treibhausgasen und Sickerverlusten sollte weiterhin im Fokus zukünftiger Untersuchungen stehen, um zur Entwicklung von nachhaltigen organischen Anbausystemen im Oman und anderen ariden tropischen Ländern beizutragen.

The diversity of postharvest losses in cassava value chains in selected developing countries

The extent of physical and economic postharvest losses at different stages of cassava value chains has been estimated in four countries that differ considerably in the way cassava is cultivated, processed and consumed and in the relationships and linkages among the value chain actors. Ghana incurs by far the highest losses because a high proportion of roots reach the consumers in the fresh form. Most losses occur at the last stage of the value chain. In Nigeria and Vietnam processors incur most of the losses while in Thailand most losses occur during harvesting. Poorer countries incur higher losses despite their capacity to absorb sub-standard products (therefore transforming part of the physical losses into economic losses) and less strict buyer standards. In monetary terms the impact of losses is particularly severe in Ghana and estimated at about half a billion US dollar per annum while in the other countries it is at the most about USD 50 million. This comparison shows that there are no “one-size-fits-all" solutions for addressing postharvest losses but rather these must be tailor-made to the specific characteristics of the different value chains.