Lebensmittelqualität zwischen Geschmack und Zeichen

Ziel der vorliegenden Arbeit war es, Lebensmittelqualität am Beispiel von Speisequark aus hofeigener und industrieller Verarbeitung mit natur- und kulturwissenschaftlichen Methoden zu erfassen bzw. zu betrachten. Das Neue dieser interdisziplinären Arbeit lag in der Entwicklung von Verbindungen zwischen hedonischen/sensorischen, ökologischen und kulturellen Qualitäten von Speisequark. Im zweiten Teil der Arbeit wurde eine sensorische Schulung für die hofeigene Milchverarbeitung entwickelt und erprobt, um die Ergebnisse dieser Arbeit in die Praxis umzusetzen. Zuerst musste ein theoretischer Ansatz entwickelt werden, der die Esshandlungen der Verbraucher als Integrationsmoment von objektiven, subjektiven und sozial-kulturellen Qualitäten betrachtet. Bei diesem handlungstheoretischen Ansatz galt es, die Trennung zwischen objektiven und subjektiven Qualitäten zu überwinden, indem über Esshandlungen der Verbraucher integrierte Verbindungen zwischen hedonischen/sensorischen, ökologischen und kulturellen Qualitäten am Beispiel von Speisequark entwickelt wurden. Als empirische Grundlage wurde erstens die sensorische Qualität mit Profilprüfungen erfasst. Zweitens wurde die ökologische Qualität mit einer Verbraucherumfrage und Conjoint-Analyse und drittens die kulturelle Qualität mit einer semiotischen Analyse betrachtet. Die diskursiven Begründungen des Esshandelns, die in ermittelnden Gruppendiskussionen qualitativ erhoben wurden, zeigten deutlich, dass diese drei Qualitäten des Hofquarks untrennbar miteinander verbunden sind. Der komplexe Begriff authentisch, mit dem die Verbraucher Hofquark charakterisierten, beinhaltete vor allem den Geschmack, aber auch die damit verbundene handwerkliche Herstellungsweise, die Verpackung, die regionale Herkunft und die ökologische Anbauweise. Hofquark ist aus Verbrauchersicht ein gutes Lebensmittel, das seine besondere Bedeutung (kulturellen Wert) auch dadurch erhält, was es nicht ist, nämlich ein industrielles Molkereiprodukt. Der neue natur- und kulturwissenschaftliche Ansatz dieser Arbeit stellt gleichzeitig ein Plädoyer für eine mehrdimensionale Qualitätsbetrachtung von Lebensmitteln dar. Aus interdisziplinärer Sicht besteht hierzu noch ein großer Forschungsbedarf.

Organic potatoes for processing

Drei Feldversuche auf zwei Standorten (DFH: 51°4, 9°4’, BEL: 52°2’, 8°08’) wurden in den Jahren 2002 bis 2004 durchgeführt, um den Einfluss der Vorfrucht, des Vorkeimens, der N- und K-Düngung und der Sorte auf Nährstoffverfügbarkeit, Gesamt- und sortierte Knollenerträge sowie die Qualität von Kartoffeln und deren Eignung für die industrielle Verarbeitung zu Pommes frites und Chips zu untersuchen. Bestimmt wurden die N- und K-Verfügbarkeit im Boden, die N- und K-Aufnahme von Kraut und Knollen, gesamte Frisch- und Trockenmasseerträge, sortierte Frischmasseerträge für die Verarbeitung, sowie die Gehalte der Knollen an Trockensubstanz und reduzierenden Zuckern. In einer sensorischen Prüfung wurden Qualitätsparameter von Pommes frites (Aussehen/Farbe, Textur und Geschmack/Geruch) bewertet, die gewichtet in einen Qualitätsindex eingingen. Die Qualität der Chips wurde maschinell durch den L-Wert (Helligkeit) des Produktes quantifiziert. Der Gehalt des Bodens an mineralisiertem Nitrat-Stickstoff hing von der Vorfrucht und dem Jahr ab. Nach Erbsen wurden zum Auflaufen der Kartoffeln in den Versuchsjahren 2003 und 2004 (187 und 132 kg NO3-N ha-1) die höchsten NO3-N-Werte in 0-60 cm Boden gemessen verglichen mit Kleegras (169 bzw. 108 kg NO3-N ha-1 oder Getreide (112 kg bzw. 97 kg NO3-N ha-1), obgleich die Differenz nicht in allen Fällen signifikant war. Entsprechend wurden nach Erbsen die höchsten Knollen-Frischmasseerträge (414 und 308 dt ha-1) geerntet. Dasselbe galt für die Trockenmasserträge, was belegt, dass der Trockensubstanzgehalt der Knollen bei verbesserter N-Versorgung nicht im selben Maße sinkt, wie der Frischmasseertrag steigt. Das Vorkeimen der Pflanzknollen führte zu einer rascheren phänologischen Entwicklung im Jugendstadium der Pflanze, beschleunigter Trockenmassebildung des Krautes und einer früheren Einlagerung von Assimilaten vom Kraut in die Knollen. Obwohl die positive Wirkung des Vorkeimens auf den Gesamtertrag bis Ende Juli (+ 26 in 2003 bzw. 34 dt ha-1 in 2004) im Jahr ohne Krautfäuleepidemie von den nicht vorgekeimten Varianten bis zur Endernte im September kompensiert wurde, konnte in diesem Jahr durch Vorkeimen dennoch ein erhöhter Ertragsanteil (+ 12%) der besonders nachgefragten Übergrößen (>50 mm für Pommes frites) erzielt werden. Die durchschnittliche Knollenmasse reagierte positiv auf Vorkeimen (+ 5,4 g), Sortenwahl (Sorte Agria) und ein erhöhtes N-Angebot (Leguminosenvorfrucht). Generell wurde deutlich, dass die Knollengesamterträge unter den Bedingungen des Ökologischen Landbaus (geringe bis mittlere Nährstoffversorgung, verkürzte Vegetationsdauer) sehr stark vom Anbaujahr abhängen. Die Ergebnisse belegen jedoch, dass organisch-mineralische N-K-Düngung den sortierten Ertrag an Knollen für die Verarbeitung signifikant erhöht: Höchste Gesamt- und sortierte Knollenfrischmasseerträge wurden nach kombinierter N (Horngrieß) und mineralischer K- (Kaliumsulfat) Gabe erzielt (348 dt ha-1 im Durchschnitt von 2002-2004). Im Gegensatz dazu kann eine Wirkung von Stallmist auf den Ertrag im Jahr der Ausbringung nicht unbedingt erwartet werden. Steigende Erträge nach Stallmistdüngung wurden lediglich in einem von drei Versuchsjahren (+58 dt ha-1) festgestellt und ließen sich eher auf eine K- als eine N-Wirkung zurückführen. Die Ergebnisse belegen, dass die Sortenwahl eine entscheidende Rolle spielt, wenn die Kartoffeln für die industrielle Verarbeitung zu den oben genannten Produkten angebaut werden. Insgesamt kann festgestellt werden, dass Kartoffelknollen aus ökologischen Anbauverfahren ausreichend hohe Trockensubstanzgehalte aufweisen, um für die Verarbeitung zu Pommes frites (>19%) geeignet zu sein und ohne dass dadurch die Konsistenz des Endproduktes gefährdet würde. Der Trockensubstanzgehalt der Referenzsorte für Chips, „Marlen“, unterschritt das in der Literatur geforderte Minimum für Chips von 23% lediglich, wenn die kombinierte Horngrieß-Kaliumsulfatdüngung zur Anwendung kam. Die Trockensubstanzgehalte der Knollen konnten durch Vorkeimen signifikant gesteigert werden und der Effekt war besonders groß (+1.2% absolut) in dem Jahr mit frühem Auftreten der Krautfäule (Phytophthora infestans), d.h. verkürzter Vegetationszeit. Die Knollen-Trockensubstanzgehalte waren in zwei von drei Experimenten nach Lagerung höher (+0.4 und 0.5% absolut) als noch zur Ernte. Sorten der sehr frühen und frühen Reifegruppe wiesen den größten relativen Anstieg der Gehalte an reduzierenden Zuckern (Glukose und Fruktose) während der Lagerung auf. Den mittelfrühen Sorten „Agria“ und „Marena“ hingegen kann aufgrund des von ihnen erreichten höchsten Qualitätsstandards (Pommes frites) zur Ernte eine sehr gute Eignung für die Bedingungen des Ökologischen Landbaus unterstellt werden. Die durchgehend beste Chipseignung wies die mittelfrühe Referenzsorte „Marlen“ auf. Insgesamt konnte nachgewiesen werden, dass durch gezielte Sortenwahl der Trockensubstanzgehalt und die Konzentration reduzierender Zucker, sowie die Qualität der Endprodukte (Pommes frites und Chips) gezielt beeinflusst werden kann. Im Gegensatz dazu haben acker- und pflanzenbauliche Maßnahmen wie Düngung, Wahl der Vorfrucht und Vorkeimen der Pflanzknollen einen eher geringen Einfluss. Dementsprechend sollte der Landwirt versuchen, durch die Wahl der Sorte den hohen Anforderungen der Industrie an die Rohware gerecht zu werden.

On-line analytical processing with conceptual information systems

A conceptual information system consists of a database together with conceptual hierarchies. The management system TOSCANA visualizes arbitrary combinations of conceptual hierarchies by nested line diagrams and allows an on-line interaction with a database to analyze data conceptually. The paper describes the conception of conceptual information systems and discusses the use of their visualization techniques for on-line analytical processing (OLAP).

Conceptual knowledge processing with formal concept analysis and ontologies

Among many other knowledge representations formalisms, Ontologies and Formal Concept Analysis (FCA) aim at modeling ‘concepts’. We discuss how these two formalisms may complement another from an application point of view. In particular, we will see how FCA can be used to support Ontology Engineering, and how ontologies can be exploited in FCA applications. The interplay of FCA and ontologies is studied along the life cycle of an ontology: (i) FCA can support the building of the ontology as a learning technique. (ii) The established ontology can be analyzed and navigated by using techniques of FCA. (iii) Last but not least, the ontology may be used to improve an FCA application.

A finite state model for on-line analytical processing in triadic contexts

About ten years ago, triadic contexts were presented by Lehmann and Wille as an extension of Formal Concept Analysis. However, they have rarely been used up to now, which may be due to the rather complex structure of the resulting diagrams. In this paper, we go one step back and discuss how traditional line diagrams of standard (dyadic) concept lattices can be used for exploring and navigating triadic data. Our approach is inspired by the slice & dice paradigm of On-Line-Analytical Processing (OLAP). We recall the basic ideas of OLAP, and show how they may be transferred to triadic contexts. For modeling the navigation patterns a user might follow, we use the formalisms of finite state machines. In order to present the benefits of our model, we show how it can be used for navigating the IT Baseline Protection Manual of the German Federal Office for Information Security.

Sensor-based Control of Chewing and Rumination Behavior of Dairy Cows

The measurement of feed intake, feeding time and rumination time, summarized by the term feeding behavior, are helpful indicators for early recognition of animals which show deviations in their behavior. The overall objective of this work was the development of an early warning system for inadequate feeding rations and digestive and metabolic disorders, which prevention constitutes the basis for health, performance, and reproduction. In a literature review, the current state of the art and the suitability of different measurement tools to determine feeding behavior of ruminants was discussed. Five measurement methods based on different methodological approaches (visual observance, pressure transducer, electrical switches, electrical deformation sensors and acoustic biotelemetry), and three selected measurement techniques (the IGER Behavior Recorder, the Hi-Tag rumination monitoring system and RumiWatchSystem) were described, assessed and compared to each other within this review. In the second study, the new system for measuring feeding behavior of dairy cows was evaluated. The measurement of feeding behavior ensues through electromyography (EMG). For validation, the feeding behavior of 14 cows was determined by both the EMG system and by visual observation. The high correlation coefficients indicate that the current system is a reliable and suitable tool for monitoring the feeding behavior of dairy cows. The aim of a further study was to compare the DairyCheck (DC) system and two additional measurement systems for measuring rumination behavior in relation to efficiency, reliability and reproducibility, with respect to each other. The two additional systems were labeled as the Lely Qwes HR (HR) sensor, and the RumiWatchSystem (RW). Results of accordance of RW and DC to each other were high. The last study examined whether rumination time (RT) is affected by the onset of calving and if it might be a useful indicator for the prediction of imminent birth. Data analysis referred to the final 72h before the onset of calving, which were divided into twelve 6h-blocks. The results showed that RT was significantly reduced in the final 6h before imminent birth.

Optimization of Processing Technology for Commercial Drying of Bananas (Matooke)

Summary - Cooking banana is one of the most important crops in Uganda; it is a staple food and source of household income in rural areas. The most common cooking banana is locally called matooke, a Musa sp triploid acuminate genome group (AAA-EAHB). It is perishable and traded in fresh form leading to very high postharvest losses (22-45%). This is attributed to: non-uniform level of harvest maturity, poor handling, bulk transportation and lack of value addition/processing technologies, which are currently the main challenges for trade and export, and diversified utilization of matooke. Drying is one of the oldest technologies employed in processing of agricultural produce. A lot of research has been carried out on drying of fruits and vegetables, but little information is available on matooke. Drying of matooke and milling it to flour extends its shelf-life is an important means to overcome the above challenges. Raw matooke flour is a generic flour developed to improve shelf stability of the fruit and to find alternative uses. It is rich in starch (80 - 85%db) and subsequently has a high potential as a calorie resource base. It possesses good properties for both food and non-food industrial use. Some effort has been done to commercialize the processing of matooke but there is still limited information on its processing into flour. It was imperative to carry out an in-depth study to bridge the following gaps: lack of accurate information on the maturity window within which matooke for processing into flour can be harvested leading to non-uniform quality of matooke flour; there is no information on moisture sorption isotherm for matooke from which the minimum equilibrium moisture content in relation to temperature and relative humidity is obtainable, below which the dry matooke would be microbiologically shelf-stable; and lack of information on drying behavior of matooke and standardized processing parameters for matooke in relation to physicochemical properties of the flour. The main objective of the study was to establish the optimum harvest maturity window and optimize the processing parameters for obtaining standardized microbiologically shelf-stable matooke flour with good starch quality attributes. This research was designed to: i) establish the optimum maturity harvest window within which matooke can be harvested to produce a consistent quality of matooke flour, ii) establish the sorption isotherms for matooke, iii) establish the effect of process parameters on drying characteristics of matooke, iv) optimize the drying process parameters for matooke, v) validate the models of maturity and optimum process parameters and vi) standardize process parameters for commercial processing of matooke. Samples were obtained from a banana plantation at Presidential Initiative on Banana Industrial Development (PIBID), Technology Business Incubation Center (TBI) at Nyaruzunga – Bushenyi in Western Uganda. A completely randomized design (CRD) was employed in selecting the banana stools from which samples for the experiments were picked. The cultivar Mbwazirume which is soft cooking and commonly grown in Bushenyi was selected for the study. The static gravitation method recommended by COST 90 Project (Wolf et al., 1985), was used for determination of moisture sorption isotherms. A research dryer developed for this research. All experiments were carried out in laboratories at TBI. The physiological maturity of matooke cv. mbwazirume at Bushenyi is 21 weeks. The optimum harvest maturity window for commercial processing of matooke flour (Raw Tooke Flour - RTF) at Bushenyi is between 15-21 weeks. The finger weight model is recommended for farmers to estimate harvest maturity for matooke and the combined model of finger weight and pulp peel ratio is recommended for commercial processors. Matooke isotherms exhibited type II curve behavior which is characteristic of foodstuffs. The GAB model best described all the adsorption and desorption moisture isotherms. For commercial processing of matooke, in order to obtain a microbiologically shelf-stable dry product. It is recommended to dry it to moisture content below or equal to 10% (wb). The hysteresis phenomenon was exhibited by the moisture sorption isotherms for matooke. The isoteric heat of sorption for both adsorptions and desorption isotherms increased with decreased moisture content. The total isosteric heat of sorption for matooke: adsorption isotherm ranged from 4,586 – 2,386 kJ/kg and desorption isotherm from 18,194– 2,391 kJ/kg for equilibrium moisture content from 0.3 – 0.01 (db) respectively. The minimum energy required for drying matooke from 80 – 10% (wb) is 8,124 kJ/kg of water removed. Implying that the minimum energy required for drying of 1 kg of fresh matooke from 80 - 10% (wb) is 5,793 kJ. The drying of matooke takes place in three steps: the warm-up and the two falling rate periods. The drying rate constant for all processing parameters ranged from 5,793 kJ and effective diffusivity ranged from 1.5E-10 - 8.27E-10 m2/s. The activation energy (Ea) for matooke was 16.3kJ/mol (1,605 kJ/kg). Comparing the activation energy (Ea) with the net isosteric heat of sorption for desorption isotherm (qst) (1,297.62) at 0.1 (kg water/kg dry matter), indicated that Ea was higher than qst suggesting that moisture molecules travel in liquid form in matooke slices. The total color difference (ΔE*) between the fresh and dry samples, was lowest for effect of thickness of 7 mm, followed by air velocity of 6 m/s, and then drying air temperature at 70˚C. The drying system controlled by set surface product temperature, reduced the drying time by 50% compared to that of a drying system controlled by set air drying temperature. The processing parameters did not have a significant effect on physicochemical and quality attributes, suggesting that any drying air temperature can be used in the initial stages of drying as long as the product temperature does not exceed gelatinization temperature of matooke (72˚C). The optimum processing parameters for single-layer drying of matooke are: thickness = 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode. From practical point of view it is recommended that for commercial processing of matooke, to employ multi-layer drying of loading capacity equal or less than 7 kg/m², thickness 3 mm, air temperatures 70˚C, dew point temperature 18˚C and air velocity 6 m/s overflow mode.

Study of individual lactation patterns of Iranian dairy buffaloes

The aims of the current study were 1) to investigate the effects of some environmental factors on lactation curve traits (LCTs) including initial milk yield (A), peak yield (PY), days to attain peak yield (PD), inclining- and declining slope of lactation (B and C, respectively), persistency (Per), and 240-d milk yield, and 2) to estimate pairwise phenotypic correlations between these traits in two Iranian buffalo ecotypes (Khuzestani and Azeri buffaloes). The dataset consisted of 15396 and 9283 lactations from 6632 Khuzestani and 3558 Azeri buffaloes, respectively (collected during 1992–2009). The results revealed that almost all of the factors had significant effects on the majority of the LCTs, whereby age group, parity and season of calving had greater influence on 240-d milk yield and PY than the other LCTs in both of the ecotypes. These effects were more apparent in Khuzestani buffaloes than in Azeri buffaloes. In the Khuzestani ecotype, the LCTs were significantly correlated with each other. However, in the Azeri ecotype the 240-d milk yield showed no significant relationship with parameters B, PD and Per. In conclusion, the studied factors play an important role in determining both the shape of the lactation curve and the overal performance of Iranian dairy buffaloes.

Opportunities and constraints of peri-urban buffalo and dairy cattle systems in Faisalabad, Punjab, Pakistan

In the big cities of Pakistan, peri-urban dairy production plays an important role for household income generation and the supply of milk and meat to the urban population. On the other hand, milk production in general, and peri-urban dairy production in particular, faces numerous problems that have been well known for decades. Peri-urban dairy producers have been especially neglected by politicians as well as non-government-organizations (NGOs). Against this background, a study in Pakistan’s third largest city, Faisalabad (Punjab Province), was carried out with the aims of gathering basic information, determining major constraints and identifying options for improvements of the peri-urban milk production systems. For data collection, 145 peri-urban households (HH) engaged in dairy production were interviewed face to face using a structured and pretested questionnaire with an interpreter. For analyses, HH were classified into three wealth groups according to their own perception. Thus, 38 HH were poor, 95 HH well off and 12 HH rich (26.2%, 65.5% and 8.3%, respectively). The richer the respondents perceived their HH, the more frequently they were actually in possession of high value HH assets like phones, bank accounts, motorbikes, tractors and cars. Although there was no difference between the wealth groups with respect to the number of HH members (about 10, range: 1 to 23), the educational level of the HH heads differed significantly: on average, heads of poor HH had followed education for 3 years, compared to 6 years for well off HH and 8 years for rich HH. About 40% of the poor and well off HH also had off-farm incomes, while the percentage was much higher - two thirds (67%) - for the rich HH. The majority of the HH were landless (62%); the rest (55 HH) possessed agricultural land from 0.1 to 10.1 ha (average 2.8 ha), where they were growing green fodder: maize, sorghum and pearl millet in summer; berseem, sugar cane and wheat were grown in winter. Dairy animals accounted for about 60% of the herds; the number of dairy animals per HH ranged from 2 to 50 buffaloes (Nili-Ravi breed) and from 0 to 20 cows (mostly crossbred, also Sahiwal). About 37% (n=54) of the HH did not keep cattle. About three quarters of the dairy animals were lactating. The majority of the people taking care of the animals were family workers; 17.3% were hired labourers (exclusively male), employed by 11 rich and 32 well off HH; none of the poor HH employed workers, but the percentages were 33.7% for the well off and 91.7% for the rich HH. The total number of workers increased significantly with increasing wealth (poor: 2.0; well off:2.5; rich: 3.4). Overall, 69 female labourers were recorded, making up 16.8% of employed workers and one fourth of the HH’s own labourers. Apparently, their only duty was to clean the animals´ living areas; only one of them was also watering and showering the animals. Poor HH relied more on female workers than the other two groups: 27.1% of the workers of poor HH were women, but only 14.8% and 6.8% of the labour force of well off and rich HH were female. Two thirds (70%) of the HH sold milk to dhodis (middlemen) and one third (35%) to neighbours; three HH (2%) did doorstep delivery and one HH (1%) had its own shop. The 91 HH keeping both species usually sold mixed milk (97%). Clients for mixed and pure buffalo milk were dhodis (78%, respectively 59%) and neighbours (28%, respectively 47%). The highest milk prices per liter (Pakistani Rupees, 100 PKR @ 0.8 Euro) were paid by alternative clients (44 PKR; 4 HH), followed by neighbours (40 PKR, 50 HH); dhodis paid lower prices (36 PKR, 99 HH). Prices for pure buffalo and mixed milk did not differ significantly. However, HH obtaining the maximum price from the respective clients for the respective type of milk got between 20% (mixed milk, alternative clients) and 68% (mixed milk, dhodi) more than HH fetching the minimum price. Some HH (19%) reported 7% higher prices for the current summer than the preceding winter. Amount of milk sold and distance from the HH to the city center did not influence milk prices. Respondents usually named problems that directly affected their income and that were directly and constantly visible to them, such as high costs, little space and fodder shortages. Other constraints that are only influencing their income indirectly, e.g. the relatively low genetic potential of their animals due to neglected breeding as well as the short- and long-term health problems correlated with imbalanced feeding and insufficient health care, were rarely named. The same accounts for problems accompanying improper dung management (storage, disposal, burning instead of recycling) for the environment and human health. Most of the named problems are linked to each other and should be addressed within the context of the entire system. Therefore, further research should focus on systematic investigations and improvement options, taking a holistic and interdisciplinary approach instead of only working in single fields. Concerted efforts of dairy farmers, researchers, NGOs and political decision makers are necessary to create an economic, ecological and social framework that allows dairy production to serve the entire society. For this, different improvement options should be tested in terms of their impact on environment and income of the farmers, as well as feasibility and sustainability in the peri-urban zones of Faisalabad.

Dairy farms typology and management of animal genetic resources in the peri-urban zone of Bamako (Mali)

Facing growth in demand, dairy production in peri-urban areas of developing countries is changing rapidly. To characterise this development around Bamako (Mali), this study establishes a typology of dairy production systems with a special focus on animal genetic resources. The survey included 52 dairy cattle farms from six peri-urban sites. It was conducted in 2011 through two visits, in the dry and harvest seasons. The median cattle number per farm was 17 (range 5-118) and 42% of farmers owned cropland (8.3 +/- 7.3 ha, minimum 1 ha, maximum 25 ha). Feeding strategy was a crucial variable in farm characterisation, accounting for about 85% of total expenses. The use of artificial insemination and a regular veterinary follow-up were other important parameters. According to breeders’ answers, thirty genetic profiles were identified, from local purebreds to different levels of crossbreds. Purebred animals raised were Fulani Zebu (45.8%), Maure Zebu (9.2%), Holstein (3.0%), Azawak Zebu (1.3%), Mere Zebu (0.5%) and Kuri taurine (0.1%). Holstein crossbred represented 30.5% of the total number of animals (19.0% Fulani-Holstein, 11.2% Maure-Holstein and 0.3% Kuri-Holstein). Montbéliarde, Normande and Limousin crossbreds were also found (6.6%, 0.7% and 0.3%, respectively). A multivariate analysis helped disaggregate the diversity of management practices. The high diversity of situations shows the need for consideration of typological characteristics for an appropriate intervention. Although strongly anchored on local breeds, the peri-urban dairy systems included a diversity of exotic cattle, showing an uncoordinated quest of breeders for innovation. Without a public intervention, this dynamic will result in an irremediable erosion of indigenous animal genetic resources.

Simultaneous Drying and Separation of Composite Agricultural Material for Hay Processing

In composite agricultural materials such as grass, tee, medicinal plants; leaves and stems have a different drying time. By this behavior, after leaving the dryer, the stems may have greater moisture content than desired, while the leaves one minor, which can cause either the appearance of fungi or the collapse of the over-dried material. Taking into account that a lot of grass is dehydrated in forced air dryers, especially rotary drum dryers, this research was developed in order to establish conditions enabling to make a separation of the components during the drying process in order to provide a homogeneous product at the end. For this, a rotary dryer consisting of three concentric cylinders and a circular sieve aligned with the more internal cylinder was proposed; so that, once material enters into the dryer in the area of the inner cylinder, stems pass through sieve to the middle and then continue towards the external cylinder, while the leaves continue by the inner cylinder. For this project, a mixture of Ryegrass and White Clover was used. The characteristics of the components of a mixture were: Drying Rate in thin layer and in rotation, Bulk density, Projected Area, Terminal velocity, weight/Area Ratio, Flux through Rotary sieve. Three drying temperatures; 40°C, 60° C and 80° C, and three rotation speeds; 10 rpm, 20 rpm and 40 rpm were evaluated. It was found that the differences in drying time are the less at 80 °C when the dryer rotates at 40 rpm. Above this speed, the material adheres to the walls of the dryer or sieve and does not flow. According to the measurements of terminal velocity of stems and leaves of the components of the mixture, the speed of the air should be less than 1.5 m s-1 in the inner drum for the leaves and less than 4.5 m s-1 in middle and outer drums for stems, in such way that only the rotational movement of the dryer moves the material and achieves a greater residence time. In other hand, the best rotary sieve separation efficiencies were achieved when the material is dry, but the results are good in all the moisture contents. The best rotary speed of sieve is within the critical rotational speed, i.e. 20 rpm. However, the rotational speed of the dryer, including the sieve in line with the inner cylinder should be 10 rpm or less in order to achieve the greatest residence times of the material inside the dryer and the best agitation through the use of lifting flights. With a finite element analysis of a dryer prototype, using an air flow allowing speeds of air already stated, I was found that the best performance occurs when, through a cover, air enters the dryer front of the Middle cylinder and when the inner cylinder is formed in its entirety through a sieve. This way, air flows in almost equal amounts by both the middle and external cylinders, while part of the air in the Middle cylinder passes through the sieve towards the inner cylinder. With this, leaves do not adhere to the sieve and flow along drier, thanks to the rotating movement of the drums and the showering caused by the lifting flights. In these conditions, the differences in drying time are reduced to 60 minutes, but the residence time is higher for the stems than for leaves, therefore the components of the mixture of grass run out of the dryer with the same desired moisture content.

Metabolic disorders in the transition period indicate that the dairy cows' ability to adapt is overstressed

Metabolic disorders are a key problem in the transition period of dairy cows and often appear before the onset of further health problems. They mainly derive from difficulties the animals have in adapting to changes and disturbances occurring both outside and inside the organisms and due to varying gaps between nutrient supply and demand. Adaptation is a functional and target-oriented process involving the whole organism and thus cannot be narrowed down to single factors. Most problems which challenge the organisms can be solved in a number of different ways. To understand the mechanisms of adaptation, the interconnectedness of variables and the nutrient flow within a metabolic network need to be considered. Metabolic disorders indicate an overstressed ability to balance input, partitioning and output variables. Dairy cows will more easily succeed in adapting and in avoiding dysfunctional processes in the transition period when the gap between nutrient and energy demands and their supply is restricted. Dairy farms vary widely in relation to the living conditions of the animals. The complexity of nutritional and metabolic processes Animals 2015, 5 979 and their large variations on various scales contradict any attempts to predict the outcome of animals’ adaptation in a farm specific situation. Any attempts to reduce the prevalence of metabolic disorders and associated production diseases should rely on continuous and comprehensive monitoring with appropriate indicators on the farm level. Furthermore, low levels of disorders and diseases should be seen as a further significant goal which carries weight in addition to productivity goals. In the long run, low disease levels can only be expected when farmers realize that they can gain a competitive advantage over competitors with higher levels of disease.