Low-Cost Micromechanically Tunable Optical Devices: Strained Resonator Engineering, Technological Implementation and Characterization

The rapid growth of the optical communication branches and the enormous demand for more bandwidth require novel networks such as dense wavelength division multiplexing (DWDM). These networks enable higher bitrate transmission using the existing optical fibers. Micromechanically tunable optical microcavity devices like VCSELs, Fabry-Pérot filters and photodetectors are core components of these novel DWDM systems. Several air-gap based tunable devices were successfully implemented in the last years. Even though these concepts are very promising, two main disadvantages are still remaining. On the one hand, the high fabrication and integration cost and on the other hand the undesired adverse buckling of the suspended membranes. This thesis addresses these two problems and consists of two main parts: • PECVD dielectric material investigation and stress control resulting in membranes shape engineering. • Implementation and characterization of novel tunable optical devices with tailored shapes of the suspended membranes. For this purposes, low-cost PECVD technology is investigated and developed in detail. The macro- and microstress of silicon nitride and silicon dioxide are controlled over a wide range. Furthermore, the effect of stress on the optical and mechanical properties of the suspended membranes and on the microcavities is evaluated. Various membrane shapes (concave, convex and planar) with several radii of curvature are fabricated. Using this resonator shape engineering, microcavity devices such as non tunable and tunable Fabry-Pérot filters, VCSELs and PIN photodetectors are succesfully implemented. The fabricated Fabry-Pérot filters cover a spectral range of over 200nm and show resonance linewidths down to 1.5nm. By varying the stress distribution across the vertical direction within a DBR, the shape and the radius of curvature of the top membrane are explicitely tailored. By adjusting the incoming light beam waist to the curvature, the fundamental resonant mode is supported and the higher order ones are suppressed. For instance, a tunable VCSEL with 26 nm tuning range, 400µW maximal output power, 47nm free spectral range and over 57dB side mode suppresion ratio (SMSR) is demonstrated. Other technologies, such as introducing light emitting organic materials in microcavities are also investigated.

Design, implementation and application of a generic framework for integrated regional land-use modeling

Land use is a crucial link between human activities and the natural environment and one of the main driving forces of global environmental change. Large parts of the terrestrial land surface are used for agriculture, forestry, settlements and infrastructure. Given the importance of land use, it is essential to understand the multitude of influential factors and resulting land use patterns. An essential methodology to study and quantify such interactions is provided by the adoption of land-use models. By the application of land-use models, it is possible to analyze the complex structure of linkages and feedbacks and to also determine the relevance of driving forces. Modeling land use and land use changes has a long-term tradition. In particular on the regional scale, a variety of models for different regions and research questions has been created. Modeling capabilities grow with steady advances in computer technology, which on the one hand are driven by increasing computing power on the other hand by new methods in software development, e.g. object- and component-oriented architectures. In this thesis, SITE (Simulation of Terrestrial Environments), a novel framework for integrated regional sland-use modeling, will be introduced and discussed. Particular features of SITE are the notably extended capability to integrate models and the strict separation of application and implementation. These features enable efficient development, test and usage of integrated land-use models. On its system side, SITE provides generic data structures (grid, grid cells, attributes etc.) and takes over the responsibility for their administration. By means of a scripting language (Python) that has been extended by language features specific for land-use modeling, these data structures can be utilized and manipulated by modeling applications. The scripting language interpreter is embedded in SITE. The integration of sub models can be achieved via the scripting language or by usage of a generic interface provided by SITE. Furthermore, functionalities important for land-use modeling like model calibration, model tests and analysis support of simulation results have been integrated into the generic framework. During the implementation of SITE, specific emphasis was laid on expandability, maintainability and usability. Along with the modeling framework a land use model for the analysis of the stability of tropical rainforest margins was developed in the context of the collaborative research project STORMA (SFB 552). In a research area in Central Sulawesi, Indonesia, socio-environmental impacts of land-use changes were examined. SITE was used to simulate land-use dynamics in the historical period of 1981 to 2002. Analogous to that, a scenario that did not consider migration in the population dynamics, was analyzed. For the calculation of crop yields and trace gas emissions, the DAYCENT agro-ecosystem model was integrated. In this case study, it could be shown that land-use changes in the Indonesian research area could mainly be characterized by the expansion of agricultural areas at the expense of natural forest. For this reason, the situation had to be interpreted as unsustainable even though increased agricultural use implied economic improvements and higher farmers' incomes. Due to the importance of model calibration, it was explicitly addressed in the SITE architecture through the introduction of a specific component. The calibration functionality can be used by all SITE applications and enables largely automated model calibration. Calibration in SITE is understood as a process that finds an optimal or at least adequate solution for a set of arbitrarily selectable model parameters with respect to an objective function. In SITE, an objective function typically is a map comparison algorithm capable of comparing a simulation result to a reference map. Several map optimization and map comparison methodologies are available and can be combined. The STORMA land-use model was calibrated using a genetic algorithm for optimization and the figure of merit map comparison measure as objective function. The time period for the calibration ranged from 1981 to 2002. For this period, respective reference land-use maps were compiled. It could be shown, that an efficient automated model calibration with SITE is possible. Nevertheless, the selection of the calibration parameters required detailed knowledge about the underlying land-use model and cannot be automated. In another case study decreases in crop yields and resulting losses in income from coffee cultivation were analyzed and quantified under the assumption of four different deforestation scenarios. For this task, an empirical model, describing the dependence of bee pollination and resulting coffee fruit set from the distance to the closest natural forest, was integrated. Land-use simulations showed, that depending on the magnitude and location of ongoing forest conversion, pollination services are expected to decline continuously. This results in a reduction of coffee yields of up to 18% and a loss of net revenues per hectare of up to 14%. However, the study also showed that ecological and economic values can be preserved if patches of natural vegetation are conservated in the agricultural landscape. -----------------------------------------------------------------------

The status and barriers to the implementation and continuation of the school gardening projects in Germany, Nigeria and the United States of America

In drawing a conclusion for this study, care must be taken in generalizing findings since the population of students and teachers investigated were limited to certain levels in the different schools and countries. This study recognized some complexity of the factors underlying the status of school gardening instruction and activities in Germany, Nigeria and the U.S. as inadequate time for decision-making in the process of gardening, motivation of teachers and students. This was seen as the major impediments that influenced the status of gardening in the three countries. However, these factors were considered to have affected students’ mode of participation in the school gardening projects. This research finding suggests that the promotion and encouragement of students in gardening activities will promote vegetable production and increasing the numbers of practical farmers. Gardening has the potential to create opportunities for learning in an environment where children are able to experience nature first hand and to use the shared experience for communication (Bowker & Tearle, 2007). Therefore, the need for students to be encouraged to participate in gardening programs as the benefit will not only reduce the rate of obesity currently spreading among youths, but will contribute to the improve knowledge on science subjects. To build a network between community, parents and schools, a parent’s community approach should be used as the curriculum. The community approach will tighten the link between schools; community members, parents, teachers and students. This will help facilitate a better gardening projects implementation. Through a close collaboration, teachers and students will be able to identify issues affecting communities and undertake action learning in collaboration with community organizations to assess community needs and plan the implementation strategies as parents are part of the community. The sense of efficacy is a central factor in motivational and learning processes that govern educational improvement, standard and performance on complex tasks of both teachers and students. Dedication and willingness are the major stimulator and achievement of a project. Through a stimulator and provision of incentives and facilities, schools can achieve the best in project development. Teachers and principals should be aware that students are the lever for achieving the set goals in schools. Failure to understand what students need will result in achieving zero result. Therefore, it is advised that schools focus more on how to lure students to work through proper collaboration with the parents and community members. Principals and teachers should identify areas where students need to be corrected, helping them to correct the problem will enable them be committed in the schools’ programs.

Effects of tubers of the Jerusalem artichoke (Helianthus tuberosus) and potatoes (Solanum tuberosum) on the intestinal microbiota of pigs and evaluation of a procedure for quantification of microbial mass in pig faeces

Die Mikrobiota im Gastrointestinaltrakt (GIT) spielt eine bedeutende Rolle beim Fermentationsprozess im Bezug auf die Nährstoffversorgung sowie die Gesundheit des Darms und des gesamten Organismus. Inulin und resistente Stärke (RS) konnten als präbiotisch wirksame Substanzen identifiziert werden und sind jeweils auch in den Knollen der Topinamburpflanze (Helianthus tuberosus) und in Kartoffeln (Solanum tuberosum) enthalten. Da sie ebenfalls energiereiche Futtermittel für Schweine sind, war es das Ziel der ersten beiden Studien, die Auswirkungen der Aufnahme von Topinamburknollen und Kartoffeln auf die intestinale Mikrobiota und Parameter des Immunsystems bei Endmastschweinen zu bestimmen. In der dritten Studie wurde die mikrobielle Biomasse quantitativ mit einem Verfahren zur Isolation von Bakterien in einer Flüssigkeit durch Hochgeschwindigkeits-Zentrifugation erfasst und der bakteriell gebundene Stickstoff (MP-N) mit dem bakteriellen und endogenem Kotstickstoff (BEDN) verglichen. Im ersten Versuch wurden 72 Endmastschweine in einem Freilandhaltungssystem in eine Kontroll- (CT), die mit Kraftfutter entsprechend des Bedarfs der Tiere für ein Leistungsniveau von 700 g täglichem Lebendmassezuwachs versorgt wurde, und eine Versuchsvariante (ET) aufgeteilt. In der Versuchsvariante erhielten die Tiere nur 70% der Kraftfuttermenge der Kontrollvariante, hatten aber Zugang zu einer abgeteilten Fläche, auf der Topinamburknollen angebaut waren. Die freie Aufnahme von Topinamburknollen wurde auf 1•24 kg Trockenmasse (TM)/Tag bestimmt, entsprechend einer Inulinaufnahme von durchschnittlich 800 g/Tag. Während sich die Wachstumsleistung in der Kontrollvariante auf 0•642 ± 0•014 kg/Tag belief, war sie in der Versuchsvariante mit 0•765 ± 0•015 kg/Tag (P=0•000) höher. Die freie Verfügbarkeit von Inulin und Fructo-oligosacchariden (FOS) im GIT der Schweine erhöhte die Keimzahlen der anaeroben Bakterien (P=0•000), Laktobazillen (P=0•046) und Hefen (P=0•000) signifikant und verringerte das Vorkommen von Clostridium perfringens im Schweinekot erheblich von lg 5•24 ± 0•17 kolonie-bildende Einheiten pro g Frischmasse (KbE/ g FM) in der Kontrollvariante auf lg 0•96 ± 0•20 KbE/ g FM in der Versuchsvariante (P=0•000). C-reaktives Protein (CRP) und Antikörper gegen Lipopolysaccharide (LPS) von Escherichia coli J5 ließen keine Unterschiede zwischen den Fütterungsvarianten erkennen. In der zweiten Untersuchung wurden 58 Endmastschweine einer Kontrollvariante (CT), die bedarfsgerecht mit einer Kraftfuttermischung für ein Leistungsniveau von 700 g Tageszunahmen gefüttert wurde, und zwei Versuchsvarianten zugeteilt. Die Versuchsvarianten erhielten eine Menge von 1•2 kg TM gedämpften Kartoffeln (potato treatment, PT) oder gedämpften und einsilierten Kartoffeln (silage treatment, ST) pro Tag und nur 46% bzw. 43% der Menge des Kraftfutters der Kontrollvariante. Die Wachstumsleistung und Schlachtkörperzusammensetzung ließen keine signifikanten Unterschiede zwischen den Varianten erkennen. Im PT und ST waren gegenüber dem CT im Kot der pH-Wert sowie die Gehalte von TM, Neutral-Detergenz-Faser (NDF), unverdautem Futterstickstoff (UDN) und teilweise von Säure-Detergenz-Faser (ADF) signifikant niedriger (P=0•000) und die von Ammonium (NH4) und Ammoniumstickstoff (NH4-N) signifikant höher (P=0•000). Das hohe Angebot von hitzebehandelten Kartoffeln führte zu einer erheblichen Verringerung von E. coli (P=0•000), C. perfringens (P=0•000) und Immunoglobulin A gegen LPS von E. coli J5 (P=0•001). Darüber hinaus waren in der ersten Versuchsperiode im ST die aeroben und anaeroben Gesamtkeimzahlen sowie die Laktobazillen und Hefen gegenüber dem PT signifikant erhöht. Die Unterschiede in der Mikrobiota zwischen der Kontroll- und Versuchsvarianten weisen auf die positiven Auswirkungen von Topinamburknollen und hitzebehandelten Kartoffeln auf die Mikrobiota im hinteren Darmabschnitt hin. Das Ziel der dritten Untersuchung war die Modifizierung des Verfahrens zur Isolation von Bakterien in einer Flüssigkeit mittels verschiedener Zentrifugationsschritte, um ein mikrobielles Pellet (MP) zu erhalten, welches die quantitative Abtrennung und Erfassung der Bakterien in Schweinekot ermöglicht. Zusätzlich wurde der BEDN Anteil sowie die Gehalte der Aminozucker Galactosamin, Glucosamin, Mannosamin und Muraminsäure im Kot und im MP bestimmt. Die untersuchten Kotproben stammten von Schweinen eines Phosphor (P) Stoffwechselversuch. Zehn männlich-kastrierte Schweine mit einem durchschnittlichen Lebendgewicht von 51•1 ± 8•5 kg wurden einzeln in Stoffwechselkäfigen gehalten. Die Tiere wurden fünf Fütterungsvarianten zugeteilt, die dem Bedarf der Tiere für ein Leistungsniveau von 700 g Tageszunahmen entsprachen, in den Rationen 2 bis 5 jedoch eine P-Gehalt unter dem Tagesbedarf der Tiere aufwiesen und in den Rationen 3 bis 5 mit abgestuften Gehalten von 50, 100 sowie 200 mg/kg einer experimentellen Phytase ergänz waren. Die Absenkung des P Gehaltes im Futter verringerte den Asche- (P=0•024) und Trockenmassegehalt im Kot (P=0•017) sowie die P Konzentration im MP (P=0•000) signifikant. Die mikrobielle Biomasse im Kot wurde durch die Wiegung des MP auf durchschnittlich 467 g/kg TM bestimmt. Der Stickstoffgehalt im Kot betrug im Mittel 46•1 g/kg TM und der in die Bakterienmasse eingebaute Stickstoffanteil 27•1 g/kg TM bzw. 58% vom Gesamtstickstoffgehalt im Kot. Die BEDN Fraktion wurde auf 73% am Kotstickstoff bestimmt. Der P-Gehalt im Kot sowie der N Gehalt im MP mit durchschnittlichen 10•4 und 57•9 g/kg TM lagen im Bereich von Literaturangaben. Die P Gehalte im MP schwankten in Abhängigkeit von der Zugabe von Phytase signifikant (P=0•000) von 1•8 bis 4•8 g/kg TM. Die Aminozucker wiesen keine signifikanten unterschiede zwischen Fütterungsvarianten auf und lagen im Bereich von Werten von Rinderkot. Ergebnisse weisen darauf hin, dass die angewandte Methode zur direkten Quantifizierung der mikrobiellen Biomasse geeignet ist.