Dye-sensitized solar cells based on perylene derivatives

The oil price rises more and more, and the world energy consumption is projected to expand by 50 percent from 2005 to 2030. Nowadays intensive research is focused on the development of alternative energies. Among them, there are dye-sensitized nanocrystalline solar cells (DSSCs) “the third generation solar cells”. The latter have gained attention during the last decade and are currently subject of intense research in the framework of renewable energies as a low-cost photovoltaic. At present DSSCs with ruthenium based dyes exhibit highest efficiencies (ca 11%). The objective of the present work is to fabricate, characterize and improve the performance of DSSCs based on metal free dyes as sensitizers, especially on perylene derivatives. The work begins by a general introduction to the photovoltaics and dye-sensitized solar cells, such as the operating principles and the characteristics of the DSSCs. Chapter 2 and 3 discuss the state of the art of sensitizers used in DSSCs, present the compounds used as sensitizer in the present work and illustrate practical issues of experimental techniques and device preparation. A comparative study of electrolyte-DSSCs based on P1, P4, P7, P8, P9, and P10 are presented in chapter 4. Experimental results show that the dye structure plays a crucial role in the performance of the devices. The dye based on the spiro-concept (bipolar spiro compound) exhibited a higher efficiency than the non-spiro compounds. The presence of tert-butylpyridine as additive in the electrolyte was found to increase the open circuit voltage and simultaneously decrease the efficiency. The presence of lithium ions in the electrolyte increases both output current and the efficiency. The sensitivity of the dye to cations contained in the electrolyte was investigated in the chapter 5. FT-IR and UV-Vis were used to investigate the in-situ coordination of the cation to the adsorbed dye in the working devices. The open-circuit voltage was found to depend on the number of coordination sites in the dye. P1 with most coordination sites has shown the lowest potential drop, opposite to P7, which is less sensitive to cations in the working cells. A strategy to improve the dye adsorption onto the TiO2 surface, and thus the light harvesting efficiency of the photoanode by UV treatment, is presented in chapter 6. The treatment of the TiO2 film with UV light generates hydroxyl groups and renders the TiO2 surface more and more hydrophilic. The treated TiO2 surface reacts readily with the acid anhydride group of the dye that acts as an anchoring group and improves the dye adsorption. The short-circuit current density and the efficiency of the electrolyte-based dye cells was considerably improved by the UV treatment of the TiO2 film. Solid-state dye-sensitized solar cells (SSDs) based on spiro-MeOTAD (used as hole transport material) are studied in chapter 7. The efficiency of SSDs was globally found to be lower than that of electrolyte-based solar cells. That was due to poor pore filling of the dye-loaded TiO2 film by the spin-coated spiro-MeOTAD and to the significantly slower charge transport in the spiro-MeOTAD compared to the electrolyte redox mediator. However, the presence of the donor moieties in P1 that are structurally similar to spiro-MeOTAD was found to improve the wettability of the P1-loaded TiO2 film. As a consequence the performance of the P1-based solid-state cells is better compared to the cells based on non-spiro compounds.

CAPM und Behavioral Finance - Versuch einer Synthese

Seit Etablierung der ersten Börsen als Marktplatz für fungible Güter sind Marktteilnehmer und die Wissenschaft bemüht, Erklärungen für das Zustandekommen von Marktpreisen zu finden. Im Laufe der Zeit wurden diverse Modelle entwickelt. Allen voran ist das neoklassische Capital Asset Pricing Modell (CAPM) zu nennen. Die Neoklassik sieht den Akteur an den Finanzmärkten als emotionslosen und streng rationalen Entscheider, dem sog. homo oeconomicus. Psychologische Einflussfaktoren bei der Preisbildung bleiben unbeachtet. Mit der Behavioral Finance hat sich ein neuer Zweig zur Erklärung von Börsenkursen und deren Bewegungen entwickelt. Die Behavioral Finance sprengt die enge Sichtweise der Neoklassik und geht davon aus, dass psychologische Effekte die Entscheidung der Finanzakteure beeinflussen und dabei zu teilweise irrational und emotional geprägten Kursänderungen führen. Eines der Hauptprobleme der Behavioral Finance liegt allerdings in der fehlenden formellen Ermittelbarkeit und Testbarkeit der einzelnen psychologischen Effekte. Anders als beim CAPM, wo die einzelnen Parameter klar mathematisch bestimmbar sind, besteht die Behavioral Finance im Wesentlichen aus psychologischen Definitionen von kursbeeinflussenden Effekten. Die genaue Wirkrichtung und Intensität der Effekte kann, mangels geeigneter Modelle, nicht ermittelt werden. Ziel der Arbeit ist es, eine Abwandlung des CAPM zu ermitteln, die es ermöglicht, neoklassische Annahmen durch die Erkenntnisse des Behavioral Finance zu ergänzen. Mittels der technischen Analyse von Marktpreisen wird versucht die Effekte der Behavioral Finance formell darstellbar und berechenbar zu machen. Von Praktikern wird die technische Analyse dazu verwendet, aus Kursverläufen die Stimmungen und Intentionen der Marktteilnehmer abzuleiten. Eine wissenschaftliche Fundierung ist bislang unterblieben. Ausgehend von den Erkenntnissen der Behavioral Finance und der technischen Analyse wird das klassische CAPM um psychologische Faktoren ergänzt, indem ein Multi-Beta-CAPM (Behavioral-Finance-CAPM) definiert wird, in das psychologisch fundierte Parameter der technischen Analyse einfließen. In Anlehnung an den CAPM-Test von FAMA und FRENCH (1992) werden das klassische CAPM und das Behavioral-Finance-CAPM getestet und der psychologische Erklärungsgehalt der technischen Analyse untersucht. Im Untersuchungszeitraum kann dem Behavioral-Finance-CAPM ein deutlich höherer Erklärungsgehalt gegenüber dem klassischen CAPM zugesprochen werden.

‘Green Consumption’ beyond mainstream economy: A discourse analysis

In contemporary society, green consumption is a popular concept. The life styles of people and consumption behaviors are moderated in accordance to the ‘green ideology’. The process of green consumption can be observed through social behaviors such as preference of bio foods, recycling, reusing, limiting the over consumption and using environmentally friendly transport systems. However, mainstream economic analyses on green consumption argued that consumer behaviors are due to the rational choice of individuality based on utility and self-preferences. The hypothesis of this paper on consumer behavior in green consumption is configured by discourses according to the discourse analysis.

Soil-less systems vs. soil-based systems for cultivating edible plants on buildings in relation to the contribution towards sustainable cities

Food production and consumption for cities has become a global concern due to increasing numbers of people living in urban areas, threatening food security. There is the contention that people living in cities have become disconnected with food production, leading to reduced nutrition in diets and increased food waste. Integrating food production into cities (urban agriculture) can help alleviate some of these issues. Lack of space at ground level in high-density urban areas has accelerated the idea of using spare building surfaces for food production. There are various growing methods being used for food production on buildings, which can be split into two main types, soil-less systems and soil-based systems. This paper is a holistic assessment (underpinned by the triple bottom line of sustainable development) of these two types of systems for food production on buildings, looking at the benefits and limitation of each type in this context. The results illustrate that soil-less systems are more productive per square metre, which increases the amount of locally grown, fresh produce available in urban areas. The results also show that soil-based systems for cultivation on buildings are more environmentally and socially beneficial overall for urban areas than soil-less systems.