3 resultados para Communication between software components
em Universitätsbibliothek Kassel, Universität Kassel, Germany
Resumo:
Self-adaptive software provides a profound solution for adapting applications to changing contexts in dynamic and heterogeneous environments. Having emerged from Autonomic Computing, it incorporates fully autonomous decision making based on predefined structural and behavioural models. The most common approach for architectural runtime adaptation is the MAPE-K adaptation loop implementing an external adaptation manager without manual user control. However, it has turned out that adaptation behaviour lacks acceptance if it does not correspond to a user’s expectations – particularly for Ubiquitous Computing scenarios with user interaction. Adaptations can be irritating and distracting if they are not appropriate for a certain situation. In general, uncertainty during development and at run-time causes problems with users being outside the adaptation loop. In a literature study, we analyse publications about self-adaptive software research. The results show a discrepancy between the motivated application domains, the maturity of examples, and the quality of evaluations on the one hand and the provided solutions on the other hand. Only few publications analysed the impact of their work on the user, but many employ user-oriented examples for motivation and demonstration. To incorporate the user within the adaptation loop and to deal with uncertainty, our proposed solutions enable user participation for interactive selfadaptive software while at the same time maintaining the benefits of intelligent autonomous behaviour. We define three dimensions of user participation, namely temporal, behavioural, and structural user participation. This dissertation contributes solutions for user participation in the temporal and behavioural dimension. The temporal dimension addresses the moment of adaptation which is classically determined by the self-adaptive system. We provide mechanisms allowing users to influence or to define the moment of adaptation. With our solution, users can have full control over the moment of adaptation or the self-adaptive software considers the user’s situation more appropriately. The behavioural dimension addresses the actual adaptation logic and the resulting run-time behaviour. Application behaviour is established during development and does not necessarily match the run-time expectations. Our contributions are three distinct solutions which allow users to make changes to the application’s runtime behaviour: dynamic utility functions, fuzzy-based reasoning, and learning-based reasoning. The foundation of our work is a notification and feedback solution that improves intelligibility and controllability of self-adaptive applications by implementing a bi-directional communication between self-adaptive software and the user. The different mechanisms from the temporal and behavioural participation dimension require the notification and feedback solution to inform users on adaptation actions and to provide a mechanism to influence adaptations. Case studies show the feasibility of the developed solutions. Moreover, an extensive user study with 62 participants was conducted to evaluate the impact of notifications before and after adaptations. Although the study revealed that there is no preference for a particular notification design, participants clearly appreciated intelligibility and controllability over autonomous adaptations.
Resumo:
A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.
Resumo:
Angesichts der Geschichte der Entwicklungspolitik, ist diese Arbeit darauf ausgerichtet, einige Beobachtungen in Bezug auf die so genannte Entwicklung hervorzuheben; insbesondere auf die andauernde prekäre Situation und Armut in ländlichen afrikanischen Gebieten. Armut ist nach Amartya SEN – weiter präzisiert von J.L. Dubois – die Deprivation von „Fähigkeiten“, die Individuen und lokale Gemeinschaften zu ausgeschlossenen und vergessenen Akteuren des Systems machen. Das nennt Paulo Freire, das Menschen zu „Objekten“ gemacht werden. Es rechtfertigt die starke Annahme, die in dieser Studie getroffen wird, dass vielmehr die Menschen als „Subjekte“ ihrer Veränderung und Entwicklung im Mittelpunkt stehen. Die Arbeit zeigt und erklärt in historischer Chronologie, wie die Entwicklungspolitiken und unterschiedliche Beteiligte auf allen Ebenen diese Situation verursachen. Trotz alledem bleiben die Individuen und lokalen Gemeinschaften, die in Symbiose mit ihrer natürlichen Umwelt leben, die reich an verschiedenen Ressourcen und Potentialen ist, als Reaktion darauf und gleichzeitig als Überlebensstrategie zutiefst verbunden mit dem, was sie vor Ort haben, womit sie eine tiefere und intensive Beziehung besitzen, wenn man von ihrer Geschichte, ihrer Kultur und der Handlungslogik ausgeht. Für externe Akteure, die sie über das vorhandene System dominieren und beeinflussen bleiben sie „Objekte“, aber in der Vielzahl ihrer endogenen Initiativen, zeigen sie die Fähigkeit und Substanz, die beweisen, dass sie auf ihrer Ebene das eigentliche Subjekt sind, die dynamischen Akteure. Aber isolierte Initiativen auf spezifische reale Bedürfnisse bei gleichzeitiger Dominierung durch das System mit seiner Marktlogik, führt dies langfristig nur zu dem Zirkulus Vitiosus der Armut. Daher ist eine ganzheitliche Sicht entscheidend für nachhaltige Entwicklung und für die notwendige Veränderung. Es geht nicht nur um die Veränderung des Systems und die Wahl politischer Maßnahmen, sondern genau genommen um das Verhalten der Akteure auf allen Ebenen und die Art der Beziehungen zwischen ihnen allen. Es ist eine Frage des erneuten Überdenkens des Entwicklungspfades, der andere Logik, Visionen, Interessen und Strategien aller Beteiligten, unserer so genannten Akteure einschließt. Ob dies von endogenen Initiativen oder neuen gemeinsamen Projekten ausgeht: man wird in einen Prozess kollektiven Lernens eintreten, den Paul Singer und Clarita Müller-Plantenberg erläutern und entwickeln in dem Konzept der Inkubation und Solidarischen Ökonomie, die Eigeninitiative, Selbstbestimmung und Selbstverwaltung von lokalen Gemeinschaften und die Öffnung für eine Neu-Konzeptualisierung und Institutionalisierung einschließt. So ein Prozess ist nur mit einem interdisziplinären Rahmen möglich. Dieser Rahmen soll auf einer zusätzlicher Kommunikation zwischen den Akteuren und Sozialwissenschaften beruhen und mit jenen, die auf dem Feld der Technologie arbeiten. So können dann technische „Experten“ angesichts eines technischen Projektfehlers, der aufgrund von bestimmten sozialen und kulturellen Realitäten zustande kam sagen, „es ist kein Scheitern ; es war ein Schritt innerhalb eines Lernprozesse der in die technischen Projekte und Studien einbezogen werden muss“. Wir haben das Energiethema gewählt; und insbesondere, Energie für eine nachhaltige ländliche Entwicklung in Subsahara-Afrika, um den Weg von der Theorie in die Praxis zu illustrieren und experimentell auszuprobieren, den Weg von den Beobachtungen zu der Veränderung, wobei Fragen, Annahmen, Strategien und konkrete Aktionen für den Wandel behandelt werden. Wir nennen unseren experimentellen Weg: DRIEE, das heißt auf Deutsch Ländliche Entwicklung und Inkubation von Energieunternehmen. Dabei gehen wir davon aus, dass: - Energie im Allgemeinen auf der internationalen Ebene fast gleichbedeutend mit Elektrizität ist. Heute bestehen die wichtigsten Bedürfnisse nach Energie dort wo die agro-pastorale Produktion, das Kochen, die Nahrungsmittelkonservierung und Verarbeitung …etc. stattfindet. - Diese ländliche Bevölkerung zu etwa 80% der nationalen Wirtschaft ausmacht. Dass sie gleichzeitig aber nur zu weniger als 5% der Energieproduktion Zugang hat, was oft auf Licht reduziert ist und nicht einmal ihrer Produktion zugute kommen kann. - Die Projekte für Energie und Elektrizität vor allem auf die Technologischen Fragen konzentriert sind und weniger auf die Bedürfnisse. Fast die Gesamtheit der Fonds für Energie wird in Bezug auf die Investitionen Infrastruktur der Produktion und Verteilung durch die konventionellen zentralisierten Netze geplant. Angesichts dieser Analysen gehen die in dieser Arbeit vorgenommenen Studien in Gambia und Kamerun von Bestandsaufnahmen und / oder beschreibenden regionalen Analysen aus: - von Bedürfnissen, von Praktiken und lokalen Initiativen von Fragen der Energie, für einzelne Professionen, Haushalte, Gruppen, spezifische Gruppen, wie Frauen, ländliche Gemeinden mit ihren spezifischen Charakteristika. - Von Potentialen: natürliche lokale Energieressourcen, soziokulturelle Ressourcen – so z.B. die empirisch feststellbaren menschliche Ressourcen wie endogenes Wissen und praktische organisatorische Fähigkeiten gegenüber den Problemen der Energie. Dieser experimentelle Schritt von Handlungsforschung (DRIEE) in Kamerun führte zu der Gründung einer Organisation, über die und mit der wir die Logik der Inkubation und Solidarischen Ökonomie einführen. Das ist FERDEDSI, das heißt auf Deutsch „Forum für Erneuerbare Energie – Nachhaltige Entwicklung und Internationale Solidarität“. Zunächst war dies eine Energiegenossenschaft und dann (im Prozess) wurde es zu einer institutionellen Nische von mehreren Mikro Initiativen in ländlichen Gebieten. FERDEDSI ist ein Prozess der Inkubation und ein Inkubator ist also gleichzeitig ein inkubiertes Energieunternehmen aber auch ein Inkubator für lokale Organisationen. Die ersten Aktionen finden in den Departments von Noun und Ménoua in der westlichen Provinz von Kamerun statt. Während der Forschungsperiode findet akademische Austausch statt (Nord-Süd und Süd-Süd), diese ist dabei zu formalen Partnerschaften zu werden, nicht nur zwischen Universitäten sondern genauer lokale Organisationen und Universitäten. Dieser letzte Typ von Partnerschaften, die die solidarische Ökonomie ausmachen ist auch eine Innovation des Prozesses für die afrikanischen Fälle, die dem Beispiel dessen, was in Lateinamerika geschieht, folgen. So kommt es zu gegenseitiger sinnvoller Ausbildung in den internationalen Arbeitsgruppen und Seminaren der Universität.