Theory for the Photoacoustic Response to X-Ray Absorption

A microscopic theory is presented for the photoacoustic effect induced in solids by x-ray absorption. The photoacoustic effect results from the thermalization of the excited Auger electrons and photoelectrons. We explain the dependence of the photoacoustic signal S on photon energy and the proportionality to the x-ray absorption coefficient in agreement with recent experiments on Cu. Results are presented for the dependence of S on photon energy, sample thickness, and the electronic structure of the absorbing solid.

Theory for Optical Absorption in Small Clusters: Dependence on Atomic Structure and Cluster Size

We present a theory which permits for the first time a detailed analysis of the dependence of the absorption spectrum on atomic structure and cluster size. Thus, we determine the development of the collective excitations in small clusters and show that their broadening depends sensitively on the tomic structure, in particular at the surface. Results for Hg_n^+ clusters show that the plasmon energy is close to its jellium value in the case of spherical-like structures, but is in general between w_p/ \wurzel{3} and w_p/ \wurzel{2} for compact clusters. A particular success of our theory is the identification of the excitations contributing to the absorption peaks.

Development of hybrid UV VCSEL with organic active material and dielectric DBR mirrors for medical, sensoric and data storage applications

Lasers play an important role for medical, sensoric and data storage devices. This thesis is focused on design, technology development, fabrication and characterization of hybrid ultraviolet Vertical-Cavity Surface-Emitting Lasers (UV VCSEL) with organic laser-active material and inorganic distributed Bragg reflectors (DBR). Multilayer structures with different layer thicknesses, refractive indices and absorption coefficients of the inorganic materials were studied using theoretical model calculations. During the simulations the structure parameters such as materials and thicknesses have been varied. This procedure was repeated several times during the design optimization process including also the feedback from technology and characterization. Two types of VCSEL devices were investigated. The first is an index coupled structure consisting of bottom and top DBR dielectric mirrors. In the space in between them is the cavity, which includes active region and defines the spectral gain profile. In this configuration the maximum electrical field is concentrated in the cavity and can destroy the chemical structure of the active material. The second type of laser is a so called complex coupled VCSEL. In this structure the active material is placed not only in the cavity but also in parts of the DBR structure. The simulations show that such a distribution of the active material reduces the required pumping power for reaching lasing threshold. High efficiency is achieved by substituting the dielectric material with high refractive index for the periods closer to the cavity. The inorganic materials for the DBR mirrors have been deposited by Plasma- Enhanced Chemical Vapor Deposition (PECVD) and Dual Ion Beam Sputtering (DIBS) machines. Extended optimizations of the technological processes have been performed. All the processes are carried out in a clean room Class 1 and Class 10000. The optical properties and the thicknesses of the layers are measured in-situ by spectroscopic ellipsometry and spectroscopic reflectometry. The surface roughness is analyzed by atomic force microscopy (AFM) and images of the devices are taken with scanning electron microscope (SEM). The silicon dioxide (SiO2) and silicon nitride (Si3N4) layers deposited by the PECVD machine show defects of the material structure and have higher absorption in the ultra violet range compared to ion beam deposition (IBD). This results in low reflectivity of the DBR mirrors and also reduces the optical properties of the VCSEL devices. However PECVD has the advantage that the stress in the layers can be tuned and compensated, in contrast to IBD at the moment. A sputtering machine Ionsys 1000 produced by Roth&Rau company, is used for the deposition of silicon dioxide (SiO2), silicon nitride (Si3N4), aluminum oxide (Al2O3) and zirconium dioxide (ZrO2). The chamber is equipped with main (sputter) and assisted ion sources. The dielectric materials were optimized by introducing additional oxygen and nitrogen into the chamber. DBR mirrors with different material combinations were deposited. The measured optical properties of the fabricated multilayer structures show an excellent agreement with the results of theoretical model calculations. The layers deposited by puttering show high compressive stress. As an active region a novel organic material with spiro-linked molecules is used. Two different materials have been evaporated by utilizing a dye evaporation machine in the clean room of the department Makromolekulare Chemie und Molekulare Materialien (mmCmm). The Spiro-Octopus-1 organic material has a maximum emission at the wavelength λemission = 395 nm and the Spiro-Pphenal has a maximum emission at the wavelength λemission = 418 nm. Both of them have high refractive index and can be combined with low refractive index materials like silicon dioxide (SiO2). The sputtering method shows excellent optical quality of the deposited materials and high reflection of the multilayer structures. The bottom DBR mirrors for all VCSEL devices were deposited by the DIBS machine, whereas the top DBR mirror deposited either by PECVD or by combination of PECVD and DIBS. The fabricated VCSEL structures were optically pumped by nitrogen laser at wavelength λpumping = 337 nm. The emission was measured by spectrometer. A radiation of the VCSEL structure at wavelength 392 nm and 420 nm is observed.

Highly Sensitive Sensor Based On Intracavity Laser Absorption Spectroscopy By Means of Relative Intensity Noise

This thesis concerns with the main aspects of medical trace molecules detection by means of intracavity laser absorption spectroscopy (ICLAS), namely with the equirements for highly sensitive, highly selective, low price, and compact size sensor. A novel two modes semiconductor laser sensor is demonstrated. Its operation principle is based on the competition between these two modes. The sensor sensitivity is improved when the sample is placed inside the two modes laser cavity, and the competition between the two modes exists. The effects of the mode competition in ICLAS are discussed theoretically and experimentally. The sensor selectivity is enhanced using external cavity diode laser (ECDL) configuration, where the tuning range only depends on the external cavity configuration. In order to considerably reduce the sensor cost, relative intensity noise (RIN) is chosen for monitoring the intensity ratio of the two modes. RIN is found to be an excellent indicator for the two modes intensity ratio variations which strongly supports the sensor methodology. On the other hand, it has been found that, wavelength tuning has no effect on the RIN spectrum which is very beneficial for the proposed detection principle. In order to use the sensor for medical applications, the absorption line of an anesthetic sample, propofol, is measured. Propofol has been dissolved in various solvents. RIN has been chosen to monitor the sensor response. From the measured spectra, the sensor sensitivity enhancement factor is found to be of the order of 10^(3) times of the conventional laser spectroscopy.

Nutrient cycling and nutrient use efficiency in urban and peri-urban agriculture of Kabul, Afghanistan

Like elsewhere also in Kabul, Afghanistan urban and peri-urban agriculture (UPA) has often been accused of being resource inefficient and unsustainable causing negatives externalities to community health and to the surroundings. These arise from the inappropriate management and use of agricultural inputs, including often pesticides and inter-city wastes containing heavy metal residues and pathogens. To address these concerns, parallel studies with the aims of quantification of carbon (C), nitrogen (N), phosphorus (P) and potassium (K) horizontal and vertical fluxes; the assessment of heavy metal and pathogen contaminations of UPA produce, and an economic analysis of cereal, vegetable and grape production systems conducted for two years in UPA of Kabul from April 2008 to October 2009. The results of the studies from these three UPA diverse production systems can be abridged as follows: Biennial net balances in vegetable production systems were positive for N (80 kg ha-1 ), P (75 kg ha-1) and C (3,927 kg ha-1), negative for K (-205 kg ha-1), whereas in cereal production systems biennial horizontal balances were positive for P (20 kg ha-1 ) and C (4,900 kg ha-1) negative for N (-155 kg ha-1) and K (-355 kg ha-1) and in vineyards corresponding values were highly positive for N (295 kg ha-1), P (235 kg ha-1), C (3,362 kg ha-1) and slightly positive for K (5 kg ha-1). Regardless of N and C gaseous emissions, yearly leaching losses of N and P in selected vegetable gardens varied from 70 - 205 kg N ha-1 and 5 - 10 kg P ha-1. Manure and irrigation water contributed on average 12 - 79% to total Inputs of N, P, K and C, 10 - 53% to total inputs of C in the gardens and fields. The elevated levels of heavy metal and pathogen loads on fresh UPA vegetables reflected contamination from increasing traffic in the city, deposits of the past decades of war, lacking collection and treatment of raw inter-city wastes which call for solutions to protect consumer and producer health and increase reliability of UPA productions. A cost-revenue analysis of all inputs and outputs of cereal, vegetable and grapes production systems over two years showed substantial differences in net UPA household income. To confirm these results, more detailed studies are needed, but tailoring and managing the optimal application of inputs to crop needs will significantly enhance farmer’s better revenues as will as environmental and produce quality.

Sensorische Erfassung von Grünlandbiomassen als Grundlage für ein teilflächenspezifisches Management im Ökologischen Landbau

Vor dem Hintergund der Integration des wissensbasierten Managementsystems Precision Farming in den Ökologischen Landbau wurde die Umsetzung bestehender sowie neu zu entwickelnder Strategien evaluiert und diskutiert. Mit Blick auf eine im Precision Farming maßgebende kosteneffiziente Ertragserfassung der im Ökologischen Landbau flächenrelevanten Leguminosen-Grasgemenge wurden in zwei weiteren Beiträgen die Schätzgüten von Ultraschall- und Spektralsensorik in singulärer und kombinierter Anwendung analysiert. Das Ziel des Precision Farming, ein angepasstes Management bezogen auf die flächeninterne Variabilität der Standorte umzusetzen, und damit einer Reduzierung von Betriebsmitteln, Energie, Arbeit und Umwelteffekten bei gleichzeitiger Effektivitätssteigerung und einer ökonomischen Optimierung zu erreichen, deckt sich mit wesentlichen Bestrebungen im Ökogischen Landbau. Es sind vorrangig Maßnahmen zur Erfassung der Variabilität von Standortfaktoren wie Geländerelief, Bodenbeprobung und scheinbare elektrische Leitfähigkeit sowie der Ertragserfassung über Mähdrescher, die direkt im Ökologischen Landbau Anwendung finden können. Dagegen sind dynamisch angepasste Applikationen zur Düngung, im Pflanzenschutz und zur Beseitigung von Unkräutern aufgrund komplexer Interaktionen und eines eher passiven Charakters dieser Maßnahmen im Ökologischen Landbau nur bei Veränderung der Applikationsmodelle und unter Einbindung weiterer dynamischer Daten umsetzbar. Beispiele hiefür sind einzubeziehende Mineralisierungsprozesse im Boden und organischem Dünger bei der Düngemengenberechnung, schwer ortsspezifisch zuzuordnende präventive Maßnamen im Pflanzenschutz sowie Einflüsse auf bodenmikrobiologische Prozesse bei Hack- oder Striegelgängen. Die indirekten Regulationsmechanismen des Ökologischen Landbaus begrenzen daher die bisher eher auf eine direkte Wirkung ausgelegten dynamisch angepassten Applikationen des konventionellen Precision Farming. Ergänzend sind innovative neue Strategien denkbar, von denen die qualitätsbezogene Ernte, der Einsatz hochsensibler Sensoren zur Früherkennung von Pflanzenkrankheiten oder die gezielte teilflächen- und naturschutzorientierte Bewirtschaftung exemplarisch in der Arbeit vorgestellt werden. Für die häufig große Flächenanteile umfassenden Leguminosen-Grasgemenge wurden für eine kostengünstige und flexibel einsetzbare Ertragserfassung die Ultraschalldistanzmessung zur Charakterisierung der Bestandeshöhe sowie verschiedene spektrale Vegetationsindices als Schätzindikatoren analysiert. Die Vegetationsindices wurden aus hyperspektralen Daten nach publizierten Gleichungen errechnet sowie als „Normalized Difference Spectral Index“ (NDSI) stufenweise aus allen möglichen Wellenlängenkombinationen ermittelt. Die Analyse erfolgte für Ultraschall und Vegetationsindices in alleiniger und in kombinierter Anwendung, um mögliche kompensatorische Effekte zu nutzen. In alleiniger Anwendung erreichte die Ultraschallbestandeshöhe durchweg bessere Schätzgüten, als alle einzelnen Vegetationsindices. Bei den letztgenannten erreichten insbesondere auf Wasserabsorptionsbanden basierende Vegetationsindices eine höhere Schätzgenauigkeit als traditionelle Rot/Infrarot-Indices. Die Kombination beider Sensorda-ten ließ eine weitere Steigerung der Schätzgüte erkennen, insbesondere bei bestandesspezifischer Kalibration. Hierbei kompensieren die Vegetationsindices Fehlschätzungen der Höhenmessung bei diskontinuierlichen Bestandesdichtenänderungen entlang des Höhengradienten, wie sie beim Ährenschieben oder durch einzelne hochwachsende Arten verursacht werden. Die Kombination der Ultraschallbestandeshöhe mit Vegetationsindices weist das Potential zur Entwicklung kostengünstiger Ertragssensoren für Leguminosen-Grasgemenge auf. Weitere Untersuchungen mit hyperspektralen Vegetationsindices anderer Berechnungstrukturen sowie die Einbindung von mehr als zwei Wellenlängen sind hinsichtlich der Entwicklung höherer Schätzgüten notwendig. Ebenso gilt es, Kalibrierungen und Validationen der Sensorkombination im artenreichen Grasland durchzuführen. Die Ertragserfassung in den Leguminosen-Grasgemengen stellt einen wichtigen Beitrag zur Erstellung einer Ertragshistorie in den vielfältigen Fruchtfolgen des Ökologischen Landbaus dar und ermöglicht eine verbesserte Einschätzung von Produktionspotenzialen und Defizitarealen für ein standortangepasstes Management.

Theoretical and experimental study of intracavity laser absorption spectroscopy

In this thesis, a dual mode tunable gas sensor based on intracavity laser absorption spectroscopy (ICLAS) principle is investigated, both, numerically and experimentally. In order to minimize the cost and size of the gas sensor, relative intensity noise (RIN) is implemented as a detection parameter. Investigation is performed to determine the effect of injection current, operating temperature, mode spacing, and cavity length on RIN. It has been found that it is best to operate the gas sensor at smaller mode spacing and near the threshold current or at larger mode spacing and far above the threshold current for the use of RIN as the readout parameter.

Technical and scale efficiency of cassava production system in Delta State, Nigeria: an application of Two-Stage DEA approach

The present study examines the level of pure technical and scale efficiencies of cassava production system including its sub-processes (that is production and processing stages) of 278 cassava farmers/processors from three regions of Delta State, Nigeria by applying Two-Stage Data Envelopment Analysis (DEA) approach. Results reveal that pure technical efficiency (PTE) is significantly lower at the production stage 0.41 vs 0.55 for the processing stage, but scale efficiency (SE) is high at both stages (0.84 and 0.87), implying that productivity can be improved substantially by reallocation of resources and adjusting operation size. The socio-economic determinants exert differential impacts on PTE and SE at each stage. Overall, education, experience and main occupation as farmer significantly improve SE while subsistence pressure reduces it. Extension contact significantly improves SE at the processing stage but reduces PTE and SE overall. Inverse size-PTE and size-SE relationships exist in cassava production system. In other words, large/medium farms are technically and scale inefficient. Gender gap exists in performance. Male farmers are technically efficient at processing stage but scale inefficient overall. Farmers in northern region are technically efficient. Investments in education, extension services and infrastructure are suggested as policy options to improve the cassava sector in Nigeria.

Determinants of technical efficiency of freshwater prawn farming in southwestern Bangladesh

This paper estimates a translog stochastic production function to examine the determinants of technical efficiency of freshwater prawn farming in Bangladesh. Primary data has been collected using random sampling from 90 farmers of three villages in southwestern Bangladesh. Prawn farming displayed much variability in technical efficiency ranging from 9.50 to 99.94% with mean technical efficiency of 65%, which suggested a substantial 35% of potential output can be recovered by removing inefficiency. For a land scarce country like Bangladesh this gain could help increase income and ensure better livelihood for the farmers. Based on the translog production function specification, farmers could be made scale efficient by providing more input to produce more output. The results suggest that farmers’ education and non-farm income significantly improve efficiency whilst farmers’ training, farm distance from the water canal and involvement in fish farm associations reduces efficiency. Hence, the study proposes strategies such as less involvement in farming-related associations and raising the effective training facilities of the farmers as beneficial adjustments for reducing inefficiency. Moreover, the key policy implication of the analysis is that investment in primary education would greatly improve technical efficiency.