Marine Yeasts from the Slope Sediments of Arabian Sea and Bay of Bengal

The present study provides an account of the occurrence and diversity of marine yeasts in the slope sediments of Arabian Sea and Bay of Bengal. It also gives a clear idea about the role of yeasts in the benthic realm of marine ecosystem. The lipolytic potential of the organisms indicate the presence of rich lipid moieties in the study area. The isolates, Candida sp. SD 302 and Pichia guilliermondii SD 337 were proved to have potential oil degrading property and can be employed as bioremediators of oil spill after further characterization. The black yeasts isolated during the study area were found to have high commercial value by virtue of the by-products obtained from them. The melanin and the melanin degrading enzyme extracted from these organisms are potential bioactive materials for application in cosmetology.

Investigations on the Effects of Petroleum Hydrocarbons on the Marine Bivalves Perna viridis (Linnaeus) and Sunetta scripta (Linne')

The thesis deals with different aspects connected with the distribution and toxicity of PHC in crude oils in the aquatic environment and marine molluscs. Information has been gathered and presented on the present status of research in the field based on a thorough review of recent literature. It is seen from the literature that the resident time of PHC becomes lesser and lesser when crude oil is discharged in large quantities into the coastal waters where excess oxygenation light penetration, temperature availability and strong tidal currents persist. This results in the reduction of the onslaught of oil pollution. This probably shows that taxic insult of crude oil in tropical shores will be relatively lesser than that occurring in temperate and boreal waters. However, there is no record of major episodal oil pollution comparable in quantum and extent to that of Torrey Canyon or Amoco Cadiz which prevents a more reliable analysis on the issue. Considerable controversy exists on the method of estimation of PHC in seawater. However, Ultra-violet fluorescence spectroscopy has been widely recommended as an analytical tool for the determination of total hydrocarbons. Similarly representation of values as chrysene equivalents has been recognised as the most reliable method of Quantum representation.

Preparation of useful raw materials from Refinery sludge and its utilisation in rubber processing

Petroleum, a mixture of organic compounds, comes from underground rock formations ranging in age from ten to several hundred million years. The process by which it is formed and developed is not yet completely known. Studies indicate that petroleum is formed mainly from microscopic-sized marine animals and plants. When these organisms died in water of low oxygen content, they did not decompose. Thus their remains sank to the bottom to be buried under accumulations of sediment. Their conversion to petroleum remains a subject of research even today.

Biochemical Effects of Petroleum Hydrocarbons on the Tropical Teleost Oreochromis mossambicus (Peters)

The present work is a base—|ine attempt to investigate and assess the toxicity of water-accommodated fractions (WAF) of Bombay High crude oil. The experimental animal selected for the present study is a euryhaline teleost, Oreochromis mossambicus (Peters), adapted to fresh water. The fish has been selected on account of its economic valve, abundant availability, experimental feasibility, ease of rearing and maintenance and also because it is one of the commonly cultured species in the South-East Asian countries.

Bioremediation of Hydrocarbons by Lysinibacillus fusiformis BTTS10

There exists a need for potential microorganism that could facilitate effective bioremediation of crude oil pollutants in the environment. Hence it was desired to isolate a potential bacterium from marine sediment, which often experiences oil pollution and develop a bioprocess for crude oil biodegradation. In the present study the sediment deposits in the beach of Munakkal, Trichur dist, Kerala, collected immediately after the major event Tsunami in 2004 was collected and analyzed by enrichment culture technique towards isolation of potential strains that could degrade crude oil and its fractions. From the results obtained it was found that the sediment deposits harbor several bacteria with potential for degrading hydrocarbons. However, among the strains obtained, isolate no. BTTS 10 showed capabilities for utilizing both alkanes and aromatic hydrocarbons and hence the same was selected for further studies.

Linseed Oil as a Multipurpose Ingredient in NBR Vulcanizate

ABSTRACT: Linseed oil is used in the dual roles of the plasticizer and the fatty acid component of the activator in nitrile rubber vulcanizates. The study shows that the substitution can substantially improve the mechanical properties in addition to other advantages such as increased cure rate, reduced leachability and reduced compound cost.

Rubber Seed Oil: A Multipurpose Additive in NR and SBR Compounds

ABSTRACT: Rubber seed oil was used as a multipurpose ingredient in natural rubber (NR) and styrene butadiene rubber (SBR) compounds. The study shows that the oil, when substituted for conventional plasticiser, imparts excellent mechanical properties to NR and SBR vulcanizates. Further, it also improves aging resistance, reduces cure time, increases abrasion resistance and flex resistance, and reduces blooming.

A Study on the Use of Castor Oil as Plasticizer in Natural Rubber Compounds

Mechanical properties and thermal degradation of natural rubber compounds containing castor oil were studied to evaluate its suitability as plasticizer. Naphthenic oil was used as a reference plasticizer. The cure time was marginally lower in the case of castor oil mixes, probably due to the presence offree fatty acids in it. The tear strength and modulus were better in the case of mixes containing castor oil, while most of the other mechanical properties were comparable to the mixes containing naphthenic oil. The heat build up and compression set were higher than that of the naphthenic oil mixes. Thermal studies showed an increase of 8 °C in the temperature of initiation of degradation and an increase of 6 °C in the temperature at which the peak rate of degradation occurred. The peak rate of degradation was comparable to that of the reference compound

A Study on the Use of Coconut Oil as Plasticiser in Natural Rubber Compounds

Mechanical properties and thermal degradation characteristics of natural rubber compounds captaining coconut oil were compared with that of a control compound containing naphthenic oil. Cure time was marginally lower in the case of coconut oil mixes, probably due to the presence of free fatty acids. Tensile strength , tear strength, resilience and abrasion resistance were better than the naphthenic oil-based compounds . Compression set and hardness were marginally inferior The coconut oil mixes had a crosslink density comparable to that of the reference compound. Thermal studies showed that the temperature of initiation of degradation was increased by 10°C and the temperature at which the peak rate of degradation occured was increased by 7°C. The peak rate of degradation was compa rable to the control compound.

Fibre optic sensor for the detection of adulterant traces in coconut oil

The design and development of a fibre optic evanescent wave refractometer for the detection of trace amounts of paraffin oil and palm oil in coconut oil is presented. This sensor is based on a side-polished plastic optical fibre. At the sensing region, the cladding and a small portion of the core are removed and the fibre nicely polished. The sensing region is fabricated in such a manner that it sits perfectly within a bent mould. This bending of the sensing region enhances its sensitivity. The oil mixture of different mix ratios is introduced into the sensing region and we observed a sharp decrease in the output intensity. The observed variation in the intensity is found to be linear and the detection limit is 2% (by volume) paraffin oil/palm oil in coconut oil. The resolution of this refractometric sensor is of the order of 10−3. Since coconut oil is consumed in large volumes as edible oil in south India, this fibre optic sensor finds great relevance for the detection of adulterants such as paraffin oil or palm oil which are readily miscible in coconut oil. The advantage of this type of sensor is that it is inexpensive and easy to set up. Another attraction of the side-polished fibre is that only a very small amount of analyte is needed and its response time is only 7 s.

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.

POPULATION GENETIC STUDIES ON THE OIL SARDINE ( Sardinella longiceps )

The objective of present investigation was to study the population genetic structure of S. longiceps by applying three different basic population genetic techniques such as cytogenetics, non-enzymatic biochemicalgenetics (general protein) and morphomeristics/metrics.

Effects of the Piscicides, Mahua Oil Cake and Croton Seed on the Prawn Culture System

Department of Marine Biology, Microbiology and Biochemistry