Ultra-wideband slot antenna with band-notch characteristics for wireless USB dongle applications

A compact ultra-wideband (UWB) printed slot antenna is described, suitable for integration with the printed circuit board (PCB) of a wireless, universal, serial-bus dongle. The design comprises of a near-rectangular slot fed by a coplanar waveguide (CPW) printed on a PCB of size 20 × 30 mm2. It has a large bandwidth covering the 3.1–10.6 GHz UWB band, with omnidirectional radiation patterns. Further, a notched band centered at 5.45 GHz wireless local area network bands is obtained within the wide bandwidth by inserting a narrow slot inside the tuning stub. Details of the antenna design are described, and the experimental results of the constructed prototype are presented. The time domain studies on the antenna shows a linear phase response throughout the band except at the notched frequency. The transient analysis of the antenna indicates very little pulse distortion confirming its suitability for high speed wireless connectivity.

Ultra-wideband slot antenna for wireless USB dongle applications

An ultra-wideband (UWB) printed slot antenna, suitable for integration with the printed circuit board (PCB) of a wireless universal serial-bus (WUSB) dongle is presented. The design comprises a near-rectangular slot fed by a coplanar waveguide printed on a PCB of width 20 mm. The proposed design has a large bandwidth covering the 3.1-10.6 GHz UWB band, unaffected by the ground length, and omnidirectional radiation patterns. A linear phase response throughout the band further confirms its suitability for high-speed wireless connectivity.

An investigation on the effects of Ag addition in the powder — in tube processing of long multifilamentary (Bi,Pb) - 2223/Ag superconducting tapes

It is important that long superconducting tape must have desired strain tolerance (less reduction of Jc with applied strains) and stress tolerance (less reduction of JC in applied stresses) for its use as coils and magnets. Ag addition to the BPSCCO system has many advantages with its physical and chemical inertness to the system, reduces the processing temperature, and promotes the grain growth, grain alignment and connectivity. All these not only enhance the critical current density of the tapes but also improve the mechanical properties. But the published results show very much scattering on the type of Ag additive to be selected, method of addition and its optimum percentage. Also there are some negative reports in this regard. The present work has been undertaken to study the effect of silver addition in different forms (Ag powder, Ag2O, AgNO3) on the superconducting and mechanical properties of (Bi,Pb)-2223/Ag tapes and to find out a suitable form of Ag additive and its optimum percentage to have better superconducting and mechanical properties. Also it is the aim of the present work is to optimise the process parameters needed to prepare (Bi,Pb)-2223/Ag multifilamentary tapes of length ~ 12 m in solenoid and pancake coil forms with good critical current density and homogeneity of J C along the length of the tapes.

‘Studies on some topics in product graphs’

For routing problems in interconnection networks it is important to find the shortest containers between any two vertices, since the w-wide diameter gives the maximum communication delay when there are up to w−1 faulty nodes in a network modeled by a graph. The concept of ‘wide diameter’ was introduced by Hsu [41] to unify the concepts of diameter and The concept of ‘domination’ has attracted interest due to its wide applications in many real world situations [38]. A connected dominating set serves as a virtual backbone of a network and it is a set of vertices that helps in routing. In this thesis, we make an earnest attempt to study some of these notions in graph products. This include, the diameter variability, the diameter vulnerability, the component factors and the domination criticality.connectivity

Web 2.0 Technologies for Education

Page 1. Web 2.0 Technologies for Education G. Santhosh Kumar Dept. Of Computer Science Cochin University Page 2. What is Internet? CUSAT is linked to this Web through 10 Mbps leased line connectivity Page 3. Size of the Web? GYWA = Sorted on Google, Yahoo!, Windows Live Search (Msn Search) and Ask YGWA = Sorted on Yahoo!, Google, Windows Live Search (Msn Search) and Ask www.worldwidewebsize.com Page 4. The Machine is Us/ing Us ■ http://in.youtube.com/watch?v=NLlGopyXT_g&feature=channel Page 5. ..

Using Neural Network Classifier Support Vector Machine Regression for the prediction of Melting Point of Drug – like compounds

In our study we use a kernel based classification technique, Support Vector Machine Regression for predicting the Melting Point of Drug – like compounds in terms of Topological Descriptors, Topological Charge Indices, Connectivity Indices and 2D Auto Correlations. The Machine Learning model was designed, trained and tested using a dataset of 100 compounds and it was found that an SVMReg model with RBF Kernel could predict the Melting Point with a mean absolute error 15.5854 and Root Mean Squared Error 19.7576

Genetic divergence in lobsters (Crustacea: Palinuridae and Scyllaridae) from the Indian EEZ

The management of exploited species requires the identification of demographically isolated populations that can be considered as independent management units (MUs), failuring in which can lead to over -fishing and depletion of less productive stocks. By characterizing the distribution of genetic variation, population sub structuring can be detected and the degree of connectivity among populations can be estimated. The genetic variation can be observed using identified molecular markers of both nuclear and mitochondrial origin. Hence, the present work was undertaken to study the genetic diversity and population/stock structure in P. homarus homarus and T. unimaculatus from different landing centres along the Indian coast using nuclear (RAPD) and mitochondrial DNA marker tools which will help towards developing management strategies for management and conservation of these declining resources.To make consistent conservation and fisheries management decisions, accurate species identifications are needed. It is also suggested that it is not always desirable to rely on a single sequence for taxonomic identification. Thus, the feasibility of using partial sequences of additional mitochondrial genes like 16SrRNA, 12SrRNA and nuclear 18SrRNA has also been explored in our study. Phylogenies provide a sound foundation for establishing taxonomy. The present work also attempts to reconstruct the phylogeny of eleven species of commercially important lobsters from the Indian EEZ using molecular markers