6 resultados para Temperature--Physiological effect.
em Cochin University of Science
Resumo:
ZnGa2O4:Dy3+ phosphor thin films were deposited on quartz substrates by radio frequency rf magnetron sputtering and the effect of substrate temperature on its structural and luminescent properties was investigated. Polycrystalline film could be deposited even at room temperature. The crystalline behavior, Zn/Ga ratio, and surface morphology of the films were found to be highly sensitive to substrate temperature. Under UV illumination, the as-deposited films at and above 300°C gave white luminescence even without any postdeposition treatments. The photoluminescent PL emission can be attributed to the combined effect of multicolor emissions from the single luminescence center Dy3+ via host-sensitization. Maximum PL emission intensity was observed for the film deposited at 600°C, and the CIE chromaticity coordinates of the emission were determined to be x,y = 0.34, 0.31 .
Resumo:
Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions.
Resumo:
The thermal diffusivity of y-alumina is determined by the photoacoustic method. The method is calibrated by determining the thermal diffusivity of copper and aluminum. The effect of the chemisorbed hydroxyl groups or thermal diffusivity is studied by degassing the sample at different temperatures.
Resumo:
The extraction and use of metals has been the mainstay for the sustained development and progress of a nation. Metals, though fairly stable in the natural environment are found in trace quantities in water bodies. Attention has therefore been focused to identify the metals that impair the water quality. In the last few decades the concern about the fate of these metals in the aquatic system has been gaining momentum, particularly in the industrial belts. The disasters caused by metal poisoning in recent times have prompted an indepth study of the interaction of metals with aquatic biota. Kerala, basically an agriculture oriented state has witnessed the upsurgence of various industries as a part of the nationwide economic development programme. Cochin has been identified as the industrial capital of the state.The present study is an attempt towards a better understanding of the metal-phytoplankton interactions with special reference to the physiological changes in the species. various parameters such as temperature, salinity, pH, nutrients, number of cells, photosynthetic pigments, carbohydrates, protein and lipid are studied to highlight the complexity of metal..phytoplankton interaction
