Effect of curing temperature , fibre loading and bonding agent on the equilibrium swelling of isora-natural rubbercomposites

Isora fibre-reinforced natural rubber (NR) composites were cured at 80, 100, 120 and 150°C using a low temperature curing accelerator system. Composites were also prepared using a conventional accelerator system and cured at 150°C. The swelling behavior of these composites at varying fibre loadings was studied in toluene and hexane. Results show that the uptake of solvent and volume fraction of rubber due to swelling was lower for the low temperature cured vulcanizates which is an indication of the better fibre/rubber adhesion. The uptake of aromatic solvent was higher than that of aliphatic solvent, for all the composites. As the fibre content increased, the solvent uptake decreased, due to the superior solvent resistance of the fibre and good fibre-rubber interactions. The bonding agent improved the swelling resistance of the composites due to the strong interfacial adhesion. Due to the improved adhesion between the fibre and rubber, the ratio of the change in volume fraction of rubber due to swelling to the volume fraction of rubber in the dry sample (V,) was found to decrease in the presence of bonding agent. At a fixed fibre loading, the alkali treated fibre composite showed a lower percentage swelling than untreated one for both systems showing superior rubber-fibre interactions.

Mechanical Properties of Short-Isora-Fiber-Reinforced Natural Rubber Composites: Effects of Fiber Length, Orientation, and Loading; Alkali Treatment;and Bonding Agent

A series of short-isora-fiber-reinforced natural rubber composites were prepared by the incorporation of fibers of different lengths (6, 10, and 14 mm) at 15 phr loading and at different concentrations (10, 20, 30, and 40 phr) with a 10 mm fiber length. Mixes were also prepared with 10 mm long fibers treated with a 5% NaOH solution. The vulcanization parameters, processability, and stress-strain properties of these composites were analyzed. Properties such as tensile strength, tear strength, and tensile modulus were found to be at maximum for composites containing longitudinally oriented fibers 10 mm in length. Mixes containing fiber loadings of 30 phr with bonding agent (resorcinol-formaldehyde [RF] resin) showed mechanical properties superior to all other composites. Scanning electron microscopy (SEM) studies were carried out to investigate the fiber surface morphology, fiber pullout, and fiber-rubber interface. SEM studies showed that the bonding between the fiber and rubber was improved with treated fibers and with the use of bonding agent.

Loading dependence similarities on the cure time and mechanical properties of rubber ferrite composites containing nickel zinc ferrite

Composite magnetic materials have the unique advantage of property modification for tailoring devices for various applications. Rubber ferrite composites (RFCs) prepared by incorporating ferrites in rubber matrixes have the advantage of easy mouldability and flexibility. RFCs containing various loadings of nickel zinc ferrite (NZF) (Ni1 xZnxFe2O4) in a natural rubber matrix have been prepared. The cure characteristics and the mechanical properties of these composites were evaluated. The effect of loading on the cure characteristics and tensile properties were also evaluated. It is found that the loading dependence on the cure time and mechanical properties exhibit an identical pattern.

Cholinergic receptor subtypes functional regulation in spinal cord injured monoplegic rats

The present study deals with the Cholinergic Receptor subtypes functional regulation in spinal cord injured monoplegic rats: Effect of 5-HT GABA and bone marrow cells.Spinal cord injury causes permanent and irrevocable motor deficits and neurodegeneration. Disruption of the spinal cord leads to diminished transmission of descending control from the brain to motor neurons and ascending sensory information. Behavioural studies showed deficits in motor control and coordination in SCI rats. Cholinergic system plays an important role in SCI, the evaluation of which provides valuable insight on the underlying mechanisms of motor deficit that occur during SCI. The cholinergic transmission was studied by assessing the muscarinic and nicotinic receptors; cholinergic enzymes- ChAT and AChE; second messenger enzyme PLC; transcription factor CREB and second messengers - IP3, cAMP and cGMP. We observed a decrease in the cholinergic transmission in the brain and spinal cord of SCI rats. The disrupted cholinergic system is the indicative of motor deficit and neuronal degeneration in the spinal cord and brain regions. SCI mediated oxidative stress and apoptosis leads to neuronal degeneration in SCI rats. The decreased expression of anti oxidant enzymes – SOD, GPx and neuronal cell survival factors - BDNF, GDNF, IGF-1, Akt and cyclin D2 along with increased expression of apoptotic factors – Bax, caspase-8, TNFa and NF-kB augmented the neuronal degeneration in SCI condition. BMC administration in combination with 5-HT and GABA in SCI rats showed a reversal in the impaired cholinergic neurotransmission and reduced the oxidative stress and apoptosis. It also enhanced the expression of cell survival factors in the spinal cord region. In SCI rats treated with 5-HT and GABA, the transplanted BMC expressed NeuN confirming that 5-HT and GABA induced the differentiation and proliferation of BMC to neurons in the spinal cord. Neurotrophic factors and anti-apoptotic elements in SCI rats treated with 5-HT and GABA along with BMC rendered neuroprotective effects accompanied by improvement in behavioural deficits. This resulted in a significant reversal of altered cholinergic neurotransmission in SCI. The restorative and neuro protective effects of BMC in combination with 5-HT and GABA are of immense therapeutic significance in the clinical management of SCI.