3 resultados para Rich, George
em Cochin University of Science
Resumo:
Investigations on the fracture behaviour of polymer blends is the topic of this thesis. The blends selected are PP/HDPE and PS/HIPS. PP/HDPE blend is chosen due to its commercial importance and PS/HIPS blend is selected to study the transition from brittle fracture to ductile fracture.PP/HDPE blends were prepared at different compositions by melt blending at 180°C and fracture failure process was investigated by conducting notch sensitivity test and tensile test at different strain rates. The effects of two types of modifiers (particulate and elastomer) on the fracture behaviour and notch sensitivity of PP/HDPE blends were studied. The modifiers used are calcium carbonate, a hard particulate filler commonly used in plastics and Ethylene Propylene Diene Monomer (EPDM). They were added in 2%, 4% and 6% by weight of the blends.The study shows that the mechanical properties of PP/HDPE blends can be optimized by selecting proper blend compositions. The selected modifiers are found to alter and improve the fracture behaviour and notch sensitivity of the blends. Particulate fillers like calcium carbonate can be used for making the mechanical behaviour more stable at the various blend compositions. The resistance to notch sensitivity of the blends is found to be marginally lower in the presence of calcium carbonate. The elastomeric modifier EPDM produces a better stability of the mechanical behaviour. A low concentration of EPDM is sufficient to effect such a change. EPDM significantly improves the resistance to notch sensitivity of the blends. The study shows that judicious selection of modifiers can improve the fracture behaviour and notch sensitivity of PP/HDPE blends and help these materials to be used for critical applications.For investigating the transition in fracture behaviour and failure modes, PS/HIPS blends were selected. The blends were prepared by melt mixing followed by injection moulding to prepare the specimens for conducting tensile, impact and flexure tests. These tests were used to simulate the various conditions which promote failure.The tensile behaviour of unnotched and notched PS/HIPS blend samples were evaluated at slow speeds. Tensile strengths and moduli were found to increase at the higher testing speed for all the blend combinations whereas maximum strain at break was found to decrease. For a particular speed of testing, the tensile strength and modulus show only a very slight decrease as HIPS content is increased up to about 40%. However, there is a drastic decrease on increasing the HIPS content thereafter.The maximum strain at break shows only a very slight change up to about 40% HIPS content and thereafter shows a remarkable increase. The notched specimens also follow a comparable trend even though the notch sensitivity is seen high for PS rich blends containing up to 40% HIPS. The notch sensitivity marginally decreases with increase in HIPS content. At the same time, it is found to increase with the increase in strain rate. It is observed that blends containing more than 40% HIPS fail in ductile mode.The impact characteristics of PSIHIPS blends studied were impact strength, the energy absorbed by the test specimen and impact toughness. Remarkable increase in impact strength is observed as HIPS content in the blend exceeds 40%. The energy absorbed by the test specimens and the impact toughness also show a comparable trend.Flexural testing which helps to characterize the load bearing capacity was conducted on PS/HIPS blend samples at the two different testing speeds of 5mmlmin and 10 mm/min. The flexural strength increases with increase in testing speed for all the blend compositions. At both the speeds, remarkable reduction in flexural strength is observed as HIPS content in the blend exceeds 40%. The flexural strain and flexural energy absorbed by the specimens are found to increase with increase in HIPS content. At both the testing speeds, brittle fracture is observed for PS rich blends whereas HIPS rich blends show ductile mode of failure.Photoelastic investigations were conducted on PS/HIPS blend samples to analyze their failure modes. A plane polariscope with a broad source of light was utilized for the study. The coloured isochromatic fringes formed indicate the presence of residual stress concentration in the blend samples. The coverage made by the fringes on the test specimens varies with the blend composition and it shows a reducing trend with the increase in HIPS content. This indicates that the presence of residual stress is a contributing factor leading to brittle fracture in PS rich blends and this tendency gradually falls with increase in HIPS content and leads to their ductile mode of failure.
Resumo:
The present study is on the nature, problems and prospects of the handloom industry in Kerala. The problems of the industry are mostly in the nature of low earnings of the workers, underutilisation of the existing capacity and low profit in its various sectors. The majority of the handloom co-operative societies are either dormant or facing liquidation. The income and employment of weavers are so pitiably low that they are living in utter poverty and starvation. Frequent price fluctuations of yarns, dyes and chemicals increase the cost of production and reduce the profitability. Consequently handloom fabrics are not able to compete with mill cloths and powerloom products. Accumulating the unsold stocks in the godowns of co-operative societies and with master weavers has become the practice of the day. Spinning mills in Kerala are producing only lower counts of yarns. S, handloom industry has to depend on textile mills in Tamil Nadu for higher counts of yarn. They create artificial scarcity and increase the prices exflorbitantly. Wage rates prevailing in Kerala are higher than those in Tamil Hadu. So rich master weavers are migrating to Tamil.Nadu and exporting the fabrics. under the label 'Kera1a Handlooms'. Governmental efforts to tackle the crisis by way of rebates and subsidies are found to be futile.
Resumo:
The inferences obtained from the study are presented in coherent area-specific levels so as to understand the ecotourism and its sub-sector areas for the researchers and policy makers about the issues, importances and potentialities of the sector. An analysis of the tourism sector in Kerala has shown tremendous growth both in terms of tourist arrivals and in terms of revenue generation from direct and indirect sources. The foreign tourist visitors in Kerala in 2014 was 9,23,336 which shows 7.60 percent increase from the last year and the domestic tourist visitors were 1,16,95,411 which again shows 7.71 percent increase, is a clear evidence of its potential. In 2014 the industry contributed revenue of 24885.44 crores from direct and indirect sources giving rise to an increase of 12.11 percent from the last year. A dichotomy of tourists and ecotourists shows that tourists in the ecotourism destinations come to 42.6 percent of the total, shows the scope, significance and its potential. Correlation of zone-wise tourist arrivals based on the ecotourism destinations highlights the fact that with only 19 of the 64 destinations that come in the central zone are the most preferred centres (around 54 percent) for the domestic as well as foreign tourists. The north zone encompassing 6 districts with rich biodiversity shows that the tourists‟ arrival patterns exhibit less promising results. Though the north zone has 31 ecotourism destinations of the state receives only 6.19 percent of the foreign visitors. The ecotourism activities in the state are primarily managed by the Eco-Development Committees (EDCs) and the Vana Samrakshana Samithies (VSS) under the Forest Development Agency of Kerala. Social class-wise categorization of membership shows that 13142 families have membership in 190 EDCs with SC (28 percent), ST (33 percent) and other marginalised communities (39 percent). But this in the VSS shows that 400 VSS have 59085 members actively engaged in ecotourism activities and social category of the VSS makes clear that majority are from the other marginalized fringe households with 62 percent where as the participation of SC is 12 percent and ST is 26 percent. An evaluation of the socio-economic and demographic matrix of the community members involved in ecotourism activities brings out region specific differences. About 75.70 percent of the respondents are males and the rest are females. Majority of the respondents (about 60 percent) are in the age group of 20 to 40 years, followed by the age group of 40-50 (20 percent). The average age of respondents in the three zones is between 35 and 37 years. The majority of the respondents are married, a few are unmarried. Average family size is 4-5 members and differences are identified among zones. Average number of adults per household is 3 and child per household is 2. Majority have an education of 10th class and below i.e. about 60 percent of the sample have only basic school education like primary, secondary and high school (i.e. up to SSLC but not passed) level. About 18 percent are SSLC passed, 10 percent are undergraduates whereas 6 percent constitute respondents having qualification of graduation and above. Majority of the „graduates and above‟ are from south and central zone. Inter-zone differences in educational profile are also identified with lesser number of „graduates and above‟ are identified in the north zone compared to the other two zones. Investigating into the income and livelihood options of the respondents gives insight about the prominence of ecotourism as an employment and livelihood option for the community members, as more than 90 percent of the respondents have cited tourism sector as their main employment option. Most (49.30 percent) of respondents get 100 percent income from tourism related activities, followed by 37.30 percent of community members have income between 75-99 percent from tourism whereas the rest (13 percent) have less than 74 percent of their income from tourism and there exists difference between zones and percentage of income. Financial habit shows that about 49.7 percent hold active bank accounts, 61 percent have savings behaviour and 73.8 percent have indebtedness. Analysis about the ownership of house brings to light that 37 percent of respondents live in their own house followed by 25.7 percent in government funded/provided house and 21 percent in their parent‟s house and 3.5 percent in rented house. About 12 percent of the respondents have other kinds of accommodation facilities such as staff quarters, etc. But in the case of north zone majority i.e. 52 percent primarily depend on the government funded house indicating the effectiveness of government housing programme. Standard of living measured in SLI frameworks shows that majority of the respondents have medium SLI values (42.3 percent); the remaining 47.7 percent have low SLI and 10 percent have high SLI. The community members have been benefitted immensely from forest and its resources. Since the ecotourism destinations are located amidst the wildlife settings, majority of them depend on forest for their livelihood. The information on the tourist‟s demographic characteristics like age, sex, educational qualification and annual income show that the age category of domestic and foreign tourists falls below the age group of less than 35 years (about 65 percent), whereas only 16 percent of tourists are aged above 46 years. The age group below 25 years consists of more international tourists (31.3 percent) compared to the proportion of domestic tourists (12.5 percent). Male-female ratio shows that the males constitute 56 percent of the sample and females with 44 percent. The factors determining the impact of ecotourism programmes in the community was evaluated with the aid of a factor analysis with 12 selected statements. The worries and concerns of the community members about the impact of ecotourism on the environment are well understood from this analysis. It can be drawn that environment protection and the role of ecotourism in improving the income and livelihood options of the local communities is the most important factor concerning the community members.