Biochemical and molecular investigations on Salmonella serovars from seafood

The present investigation was envisaged to determine the prevalence and identify the different Salmonella serovar in seafood from Cochin area. Though, the distribution of Salmonella serovars in different seafood samples of Cochin has been well documented, the present attempt was made to identify the different Salmonella serovars and determine its prevalence in various seafoods. First pan of this investigation involved the isolation and identification of Salmonella strains with the help of different conventional culture methods. The identified isolates were used for the further investigation i.e. serotyping, this provides the information about the prevalent serovars in seafood. The prevalent Salmonella strains have been further characterized based on the utilization of different sugars and amino acids, to identify the different biovar of a serovar.A major research gap was observed in molecular characterization of Salmonella in seafood. Though, previous investigations reported the large number of Salmonella serovars from food sources in India, yet, very few work has been reported regarding genetic characterization of Salmonella serovars associated with food. Second part of this thesis deals with different molecular fingerprint profiles of the Salmonella serovars from seafood. Various molecular typing methods such as plasmid profiling, characterization of virulence genes, PFGE, PCR- ribotyping, and ERIC—PCR have been used for the genetic characterization of Salmonella serovars.The conventional culture methods are mainly used for the identification of Salmonella in seafood and most of the investigations from India and abroad showed the usage of culture method for detection of Salmonella in seafood. Hence, development of indigenous, rapid molecular method is most desirable for screening of Salmonella in large number of seafood samples at a shorter time period. Final part of this study attempted to develop alternative, rapid molecular detection method for the detection of Salmonella in seafood. Rapid eight—hour PCR assay has been developed for detection of Salmonella in seafood. The performance of three different methods viz., culture, ELISA and PCR assays were evaluated for detection of Salmonella in seafood and the results were statistically analyzed. Presence of Salmonella cells in food and enviromnental has been reported low in number, hence, more sensitive method for enumeration of Salmonella in food sample need to be developed. A quantitative realtime PCR has been developed for detection of Salmonella in seafood. This method would be useful for quantitative detection of Salmonella in seafood.

Characterization and virulence potential of phenotypically diverse Aeromonas veronii isolates recovered from moribund freshwater ornamental fishes of Kerala, India

In the present study, we investigated the involvement of Aeromonas spp. in eliciting disease outbreaks in freshwater ornamental fishes across the state of Kerala, India. We investigated three incidences of disease, in which the moribund fishes exhibited clinical signs such as haemorrhagic septicemia (in gouramy, Trichogaster sp.), dropsy (in Oscar, Astronotus ocellatus) and tail rot/fin rot (in gold fish, Carassius carassius). Pure cultures (n = 20 from each fish; 60 in total) of Aeromonas spp. were recovered from the abdominal fluid as well as from internal organs of affected fishes, although they could not be identified to species level because of the variations in their phenotypic characters. The molecular fingerprinting of the isolates using Enterobacterial Repetitive Intergenic Consensus PCR proved the genetic diversity of the isolates from the three sites. The phylogenetic trees constructed using concatenated sequences (using 16S rRNA, gyrA, gyrB and rpoD genes) indicated that they were related to Aeromonas veronii. They exhibited marked cytotoxic and haemolytic activity, which were responsible for the pathogenic potential of the isolates. The isolates possessed multiple virulence genes such as enterotoxins (act and alt), haemolytic toxins (aerA and hlyA), genes involved in type III secretion system (ascV, aexT and ascF–ascG), glycerophospholipid-cholesterol acyltransferase (gcat) and a type IV pilus (tapA) gene, as determined by PCR. Virulence of representative isolates to goldfish was also tested, and we found LD50 values of 104.07–105.35 cfu/fish. Furthermore, the organisms could be recovered as pure cultures from the lesions as well as from the internal organs.

Multifinger Feature Level Fusion Based Fingerprint Identification

Fingerprint based authentication systems are one of the cost-effective biometric authentication techniques employed for personal identification. As the data base population increases, fast identification/recognition algorithms are required with high accuracy. Accuracy can be increased using multimodal evidences collected by multiple biometric traits. In this work, consecutive fingerprint images are taken, global singularities are located using directional field strength and their local orientation vector is formulated with respect to the base line of the finger. Feature level fusion is carried out and a 32 element feature template is obtained. A matching score is formulated for the identification and 100% accuracy was obtained for a database of 300 persons. The polygonal feature vector helps to reduce the size of the feature database from the present 70-100 minutiae features to just 32 features and also a lower matching threshold can be fixed compared to single finger based identification

FEM based Virtual Prototyping and Design of Third Harmonic Excitation System for Low Voltage Brushless Alternators

Salient pole brushless alternators coupled to IC engines are extensively used as stand-by power supply units for meeting in- dustrial power demands. Design of such generators demands high power to weight ratio, high e ciency and low cost per KVA out- put. Moreover, the performance characteristics of such machines like voltage regulation and short circuit ratio (SCR) are critical when these machines are put into parallel operation and alterna- tors for critical applications like defence and aerospace demand very low harmonic content in the output voltage. While designing such alternators, accurate prediction of machine characteristics, including total harmonic distortion (THD) is essential to mini- mize development cost and time. Total harmonic distortion in the output voltage of alternators should be as low as possible especially when powering very sophis- ticated and critical applications. The output voltage waveform of a practical AC generator is replica of the space distribution of the ux density in the air gap and several factors such as shape of the rotor pole face, core saturation, slotting and style of coil disposition make the realization of a sinusoidal air gap ux wave impossible. These ux harmonics introduce undesirable e ects on the alternator performance like high neutral current due to triplen harmonics, voltage distortion, noise, vibration, excessive heating and also extra losses resulting in poor e ciency, which in turn necessitate de-rating of the machine especially when connected to non-linear loads. As an important control unit of brushless alternator, the excitation system and its dynamic performance has a direct impact on alternator's stability and reliability. The thesis explores design and implementation of an excitation i system utilizing third harmonic ux in the air gap of brushless al- ternators, using an additional auxiliary winding, wound for 1=3rd pole pitch, embedded into the stator slots and electrically iso- lated from the main winding. In the third harmonic excitation system, the combined e ect of two auxiliary windings, one with 2=3rd pitch and another third harmonic winding with 1=3rd pitch, are used to ensure good voltage regulation without an electronic automatic voltage regulator (AVR) and also reduces the total harmonic content in the output voltage, cost e ectively. The design of the third harmonic winding by analytic methods demands accurate calculation of third harmonic ux density in the air gap of the machine. However, precise estimation of the amplitude of third harmonic ux in the air gap of a machine by conventional design procedures is di cult due to complex geome- try of the machine and non-linear characteristics of the magnetic materials. As such, prediction of the eld parameters by conven- tional design methods is unreliable and hence virtual prototyping of the machine is done to enable accurate design of the third har- monic excitation system. In the design and development cycle of electrical machines, it is recognized that the use of analytical and experimental methods followed by expensive and in exible prototyping is time consum- ing and no longer cost e ective. Due to advancements in com- putational capabilities over recent years, nite element method (FEM) based virtual prototyping has become an attractive al- ternative to well established semi-analytical and empirical design methods as well as to the still popular trial and error approach followed by the costly and time consuming prototyping. Hence, by virtually prototyping the alternator using FEM, the important performance characteristics of the machine are predicted. Design of third harmonic excitation system is done with the help of results obtained from virtual prototype of the machine. Third harmonic excitation (THE) system is implemented in a 45 KVA ii experimental machine and experiments are conducted to validate the simulation results. Simulation and experimental results show that by utilizing third harmonic ux in the air gap of the ma- chine for excitation purposes during loaded conditions, triplen harmonic content in the output phase voltage is signi cantly re- duced. The prototype machine with third harmonic excitation system designed and developed based on FEM analysis proved to be economical due to its simplicity and has the added advan- tage of reduced harmonics in the output phase voltage.