Variations of surface boundary layer parameters associated with Cyclone Gonu over the Arabian Sea using QuikSCAT data

This study attempted to quantify the variations of the surface marine atmospheric boundary layer (MABL) parameters associated with the tropical Cyclone Gonu formed over the Arabian Sea during 30 May–7 June 2007 (just after the monsoon onset). These characteristics were evaluated in terms of surface wind, drag coefficient, wind stress, horizontal divergence, and frictional velocity using 0.5◦ × 0.5◦ resolution Quick Scatterometer (QuikSCAT) wind products. The variation of these different surface boundary layer parameters was studied for three defined cyclone life stages: prior to the formation, during, and after the cyclone passage. Drastic variations of the MABL parameters during the passage of the cyclone were observed. The wind strength increased from 12 to 22 m s−1 in association with different stages of Gonu. Frictional velocity increased from a value of 0.1–0.6 m s−1 during the formative stage of the system to a high value of 0.3–1.4 m s−1 during the mature stage. Drag coefficient varied from 1.5 × 10−3 to 2.5 × 10−3 during the occurrence of Gonu. Wind stress values varied from 0.4 to 1.1 N m−2. Wind stress curl values varied from 10 × 10−7 to 45 × 10−7 N m−3. Generally, convergent winds prevailed with the numerical value of divergence varying from 0 to –4 × 10−5 s−1. Maximum variations of the wind parameters were found in the wall cloud region of the cyclone. The parameters returned to normally observed values in 1–3 days after the cyclone passage

Sea Level Variations during the Late Quaternary and Coastal Evolution along the Northern Kerala, South West of India

In the present investigation, an attempt is made to document various episodes of transgression and regression during the late Quaternary period from the study of coastal and shelf sequences extending from the inland across the beach to the shelf domain. Shore parallel beach ridges with alternating swales and occurrence of strand line deposits on the shelf make the northern Kerala coast an ideal natural laboratory for documenting the morpho-dynamic response of the coast to the changing sea level. The objectives of the study are lithographic reconstruction of environments of deposition from the coastal plain and shelf sequences; documentation of episodes of transgression and regression by studying different coastal plain sequences and shelf deposits and evolve a comprehensive picture of late Quaternary coastal evolution and sea level changes along the northern Kerala coast by collating morphological, lithological and geochronological evidences from the coastal plain and shelf sequences. The present study is confined to two shore-normal east-west trending transects, Viz. Punjavi and Onakkunnu, in the northern Kerala coast.

Salinity Intrusion and Seasonal Water Quality Variations in the Tidal Canals of Cochin

The study conducted on the salinity intrusion and seasonal water quality variations in the tidal canals of cochin. The main objectives are, salinity intrusion profile, water quality variation of the surface water of the canals,hierarchical utility of the water bodies and to understand the non-conservative components in the water body. The parameters monitored werepH,temperature,alkalinity,conductivity,DO(dissolvedoxygen),COD(chemical oxygen demand),BOD(biochemical oxygen demand0,chloride, total hardness, calcium hardness, dissolved phosphate, nitrate, total iron, sulphate, turbidity, total coliform and SUVA at 254nm. The tidal canals of GCDA were found to be creeks extending to the interior, canals inter connecting parts of the estuary or canals with seasonally broken segments. Based on utility the canals could be classified as: canals heavely polluted and very saline,canals polluted by urban waste , canals having fresh water for most part of the year and not much polluted, fresh water bodies heavily polluted. During the rainy months carbon fixation by plankton is nonexistent,and during the dry months Chitrapuzha becomes a sink of phosphate. The study indicated abiotic subrouts for dissolved phosphate and revealed the potential pitfalls in LOICZ modeling exercise on sewage ladentidal canals. It was also found that all canals except for the canals of West cochin and chittoorpuzha have fresh water for some part of the year. The water quality index in the durable fresh water stretches was found to be of below average category.

Tailoring the microwave dielectric properties of BaRE2Ti4O12 and BaRE2Ti5O14 ceramics bycompositional variations

Ceramic dielectric resonators in the BaO-RE2O3-TiO2 (RE=rare earth) system have been prepared by the conventional solid state ceramic route. The dielectric properties have been tailored by substitution of different rare earth oxides and by bismuth oxide addition. The dielectric constants increased with Bi addition whereas the Q decreased. The temperature coeffecient of the resonant frequency improved with bismuth addition.

Tailoring the Microwave Dielectric Properties of BaRE2Ti4012 and BaRE2Ti5014 Ceramics by Compositional Variations

Ceramic dielectric resonators in the BaO-RE2O3-TiO2 (RE = rare earth) system have been prepared by the conventional solid state ceramic route. The dielectric properties have been tailored by substitution of different rare earth oxides and by bismuth oxide addition. The dielectric constants increased with Bi addition whereas the 0 decreased. The temperature coefficient of the resonant frequency improved with bismuth addition

Variations on the infaunal polychaetes due to bottom trawling along the inshore waters of Kerala (south-west coast of India)

Variations of the infaunal polychates populations due to bottom trawling were studied during December 2000 to November 2002 at depth ranging from 0-50 m along Cochin-Munambam area (Kerala, long. 76degree10'94" to 75degree 56' and lat.9degree58' to 10degree10'), in the southwest coast of India.Infaunal polychaetes from the sediment samples were collected both before and after experimental trawling in order to assess the variations on their abundance (no.m-2),biomass(g.m-2) and diversity due to bottom trawling .Highest variations in polychaetes were recorded at station 9 in May 2002 where polychaete abundance increased to 20710 no.m-2 after trawling from 2787 no.m-2 before trawling.Biomass showed highest variations at station 3 in December 2000 where biomass increased from 7.16g.m-2 recorded before trawling to 34.53 g.m-2 in the samples collected after trawling .Multivariate community analysis carried out based on both species abundance and biomass of plychaetes also confirm the wide variations in the similarities of the stations comparing both before and after trawling

Ecobiogeography, Spatial and Temporal Variations of Microzooplankton Along the East Coast of India

In the present study an attempt has been made to understand the microzooplankton community along the easr coast of India. Most of the earlier studies projected Bay of Bengal as an oligotrophic system where phytoplankton growth is limited by a number of factors among which nutrients are the foremost. Hence it is logical to consider that the most of the primary production in the Bay of Bengal could be contributed by small sized phytoplankton harnessing the available resources, which in turn can be utilized effiency by the microzooplankton only. Hence microzooplankton could play in transferring primary organic carbon to higher tropic levels in this region.

Studies on the Quality of Rainwater at Various Land Use Locations and Variations by Interaction with Domestic Rainwater Harvesting Systems

The present study focused on the quality of rainwater at various land use locations and its variations on interaction with various domestic rainwater harvesting systems.Sampling sites were selected based upon the land use pattern of the locations and were classified as rural, urban, industrial and sub urban. Rainwater samples were collected from the south west monsoon of May 2007 to north east monsoon of October 2008, from four sampling sites namely Kothamangalam, Emakulam, Eloor and Kalamassery, in Ernakulam district of the State of Kerala, which characterized typical rural, urban, industrial and suburban locations respectively. Rain water samples at various stages of harvesting were also collected. The samples were analyzed according to standard procedures and their physico-chemical and microbiological parameters were determined. The variations of the chemical composition of the rainwater collected were studied using statistical methods. It was observed that 17.5%, 30%, 45.8% and 12.1% of rainwater samples collected at rural, urban, industrial and suburban locations respectively had pH less than 5.6, which is considered as the pH of cloud water at equilibrium with atmospheric CO,.Nearly 46% of the rainwater samples were in acidic range in the industrial location while it was only 17% in the rural location. Multivariate statistical analysls was done using Principal Component Analysis, and the sources that inf1uence the composition of rainwater at each locations were identified .which clearly indicated that the quality of rain water is site specific and represents the atmospheric characteristics of the free fall The quality of harvested rainwater showed significant variations at different stages of harvesting due to deposition of dust from the roof catchment surface, leaching of cement constituents etc. Except the micro biological quality, the harvested rainwater satisfied the Indian Standard guide lines for drinking water. Studies conducted on the leaching of cement constituents in water concluded that tanks made with ordinary portland cement and portland pozzolana cement could be safely used for storage of rain water.

Dynamics of laser produced silver plasma under film deposition conditions studied using optical emission spectroscopy

Laser produced plasma from silver is generated using a Q-switched Nd:YAG laser. Optical emission spectroscopy is used to carry out time of flight (TOF) analysis of atomic particles. An anomalous double peak profile in the TOF distribution is observed at low pressure. A collection of slower species emerge at reduced pressure below 4 X lO-3 mbar and this species has a greater velocity spread. At high pressure the plasma expansion follows the shockwave model with cylindrical symmetry whereas at reduced pressure it shows unsteady adiabatic expansion (UAE). During UAE the species show a parabolic increases in the expansion time with radial distance whereas during shock wave expansion the exponent is less than one. The angular distribution of the ablated species in the plume is obtained from the measurement of optical density of thin films deposited on to glass substrates kept perpendicular to the plume. There is a sharp variation in the film thickness away from the film centre due to asymmetries in the plume.

Influence of Angle of Air Injection and Particles in Bed Hydrodynamics of Swirling Fluidized Bed

The thesis presented here unveils an experimental study of the hydrodynamic characteristics of swirling fluidized bed viz. pressure drop across the distributor and the bed, minimum fluidizing velocity, bed behaviour and angle of air injection. In swirling fluidized bed the air is admitted to the bed at an angle 'Ѳ' to the horizontal. The vertical component of the velocity v sin Ѳ causes fluidization and the horizontal component v cos Ѳ contributes to swirl motion of the bed material.The study was conducted using spherical particles having sizes 3.2 mm, 5.5 mm & 7.4 mm as the bed materials. Each of these particles was made from high density polyethylene, nylon and acetal having relative densities of 0.93, 1.05 and 1.47 respectively.The experiments were conducted using conidour type distributors having four rows of slits. Altogether four distributors having angles of air injection (Φ)- 0°, 5°, 10° & 15° were designed and fabricated for the study. The total number of slits in each distributor was 144. The area of opening was 6220 mm2 making the percentage area of opening to 9.17. But the percentage useful area of opening of the distributor was 96.The experiments on the variation of distributor pressure drop with superficial velocity revealed that the distributor pressure drop decreases with angle of air injection. Investigations related to bed hydrodynamics were conducted using 2.5 kg of bed material. The bed pressure drop measurements were made along the radial direction of the distributor at distances of 60 mm, 90 mm, 120 mm & 150 mm from the centre of the distributor. It was noticed that after attaining minimum fluidizing velocity, the bed pressure drop increases along the radial direction of the distributor. But at a radial distance of 90 mm from the distributor centre, after attaining minimum fluidizing velocity the bed pressure drop remains almost constant. It was also observed that the bed pressure drop varies inversely with particle size as well as particle density.An attempt was made to determine the effect of various parameters on minimum fluidizing velocity. It was noticed that the minimum fluidizing velocity varies directly with angle of air injection (Φ), particle size and particle density.The study on the bed behaviour showed that the superficial velocity required for initiating various bed phenomena (such as swirl motion and separation of particles from the cone at the centre) increase with increase in particle size as well as particle density. It was also observed that the particle size and particle density directly influence the superficial velocity required for various regimes of bed behaviour such as linear variation of bed pressure drop, constant bed pressure drop and sudden increase or decrease in bed pressure drop.Experiments were also performed to study the effect of angle of air injection (Φ). It was noticed that the bed pressure drop decreases with angle of air injection. It was also noticed that the angle of air injection directly influence the superficial velocity required for initiating various bed phenomena as well as the various regimes of bed behaviour.

A Study on Variations in Industrial Electricity Tariff & Regulatory Intervention in kerala State

Department of Applied Economics, Cochin University of Science and Technology

Studies on storm surges and sea level variations along the east coast of india

It became so usual for the east coast of India to face at least IO to 15 cyclones every year, out of which 3 to 4 may reach the deep depression stage. As a result the east coast of India experiences frequent heavy damages of varying intensities due to storm surges and it is also not unusual to experience a calamitous deluge once in a decade or so. Loss of life and damages can be minimized only if the magnitude of the surge could be predicted at least a day in advance. Therefore, an attempt to study the storm surges generated by the cyclones that strike the east coast of India and. suggest a method of predicting them through nomogram is made

Inter- State Variations in Productivity trends and Technological Change in Indian industry

The present study entitled ‘Inter-State Variations in Manufacturing Productivity and Technological Changes in India’ covers a period of 38 years from l960 tol998-99. The study is mainly based on ASI data. The study starts with a discussion of the major facilitating factors of industrialization, namely, historical forces, public policy and infrastructure facilities. These are discussed in greater details in the context of our discussion on Perrox’s (1998) ‘growth pole’ and ‘development pole’, Hirschman’s (1958) ‘industrial centers’ and Myrdal’s ‘spread effect’ Most of the existing literature more or less agrees that the process of industrialization has not been unifonn in all Indian states. There has been a decline in inter-state industrial disparities over time. This aspect is dealt at some length in the third chapter. An important element that deserves detailed attention is the intra-regional differences in industrialisation. Regional industrialisation implies the emergence of a few focal points and industrial regions. Calcutta, Bombay and Madras were the initial focal points. Later other centers like Bangalore, Amritsar, Ahemedabad etc. emerged as nodal points in other states. All major states account for focal points. The analysis made in the third chapter shows that industrial activities generally converge to one or two focal points and industrial regions have emerged out of the focal points in almost all states. One of the general features of these complexes and regions is that they approximately accommodate 50 to 75 percent of the total industrial units and workers in the state. Such convergence is seen hands in glow with urbanization. It was further seen that intra-regional industrial disparity comes down in industrial states like Maharashtra, Gujarat and Uttar Pradesh.