EPDM/CIIR Blends: Compatibility, Morphology and Physical Properties

A detailed study of the blends of ethylene-propylene-diene rubber (EPDM) and chlorobutyl rubber (CIIR) is proposed in this study. These blends may find application in the manufacture of curing diaphragms/curing envelopes for tire curing applications. EPDM possesses better physical properties such as high heat resistance, ozone resistance, cold and moisture resistance, high resistance to permanent defonnation, very good resistance to flex cracking and impact. Because of the low gas and moisture penneability, good weathering resistance and high thermal stability of CIIR, blends of EPDM with CIlR may be attractive, if sufficient mechanical strength can be developed. Although a lot of work has been done on elastomer blends, studies on the blends of EPDM and CIIR rubbers are meagre. Hence in this investigation it is proposed to make a systematic study on the characteristics of EPDM and CIIR rubber blends.The mechanical and physical properties of an elastomer blend depend mainly on the blend compatibility. So in the first part of the study, it is proposed to develop compatible blends of EPDM with CIIR. Various commercial grades of ethylenepropylene- diene rubber are proposed to be blended with a specific grade of chlorobutyl rubber at varying proportions. The extent of compatibility in these blends is proposed to be evaluated based on their mechanical properties such as tensile strength, tear strength and ageing resistance. In addition to the physical property measurements, blend compatibility is also proposed to be studied based on the glass transition behavlour of the blends in relation to the Tg's of the individual components using Differential Scanning Calorimetry (DSC) and Dynamic Mechanical Analysis (DMA). The phase morphology of the blends is also proposed to be investigated by Scanning Electron Microscopy (SEM) studies of the tensile fracture surfaces. In the case of incompatible blends, the effect of addition of chlorosulfonated polyethylene as a compatibiliser is also proposed to be investigated.In the second part of the study, the effect of sulphur curing and resin curing on the curing behaviour and the vulcanizate properties of EPDM/CIIR blends are planned to be evaluated. Since the properties of rubber vulcanizates are determined by their network structures, it is proposed to determine the network structure of the vulcanizates by chemical probes so as to correlate it with the mechanical properties.In the third part of the work, the effect of partial precuring of one of the components prior to blending as a possible means of improving the properties of the blend is proposed to be investigated. This procedure may also help to bring down the viscosity mismatch between the constituent e1astomers and provide covulcanization of the blend.The rheological characteristics and processability of the blends are proposed to be investigated in the last part of the study. To explore their possible applications, the air permeability of the blend samples at varying temperatures is proposed to be measured. The thermal diffusivity behaviour of EPDM/CIlR blends is also proposed to be investigated using novel laser technique. The thermal diffusivity of the blends along with the thermal degradation resistance may help to determine whether the blends are suitable for high temperature applications such as in the manufacturing of curing envelope.

Studies On Vulcanization, Rheology And Reinforcement Of Natural Rubber Latex With Special Reference To Accelerator Combinations, Surface Active Agents And Gamma Irradiation

In the present work, studies on vulcanization, rheology and reinforcement of natural rubber latex with special reference to accelerator combinations, surface active agents and gamma irradiation have been undertaken. In vulcanization, the choice of vulcanization system, the extent and mc-zie of vulcanization and network structure of the vulcanizate are important factors contributing to the overall quality of the product. The vulcanization system may be conventional type using elemental sulfur or a system involving sulfur donors. The latter type is used mainly in the manufacture of heat resistant products. For improving the technical properties of the products such as modulus and tensile strength, different accelerator combinations are used. It is known that accelerators have a strong effect on the physical properties of rubber vulcanizates. A perusal of the literature indicates that fundamental studies on the above aspects of latex technology are very limited. Thereforea systematic study on vulcanization, rheology and reinforcement of natural rubber latex with reference to the effect of accelerator combinations, surface active agents and gamma irradiation has been undertaken. The preparation and evaluation of some products like latex thread was also undertaken as a part of the study. The thesis consists of six chapter

Women Industrial Cooperatives- An Analysis of Its Structure, Performance and Growth in Kannur District

In the present study made an attempt to analyse the structure, performance and growth of women industrial cooperatives in kannur district, Kerala. The study encompasses all women industrial cooperatives registered at the district industries center, kannur and that currently exist. The women industrial cooperatives are classified into two ie; group with network and another group without network. In Kannur there are 54 units working as women industrial cooperatives. One of the main problems the women cooperatives face is the lack of working capital followed marketing problem. The competition between cooperatives and private traders is very high. The variables examined to analyse the performance of women industrial cooperatives in Kannur showed that there exists inter unit differences in almost all the variables. The financial structure structure shows that the short term liquidity of women cooperatives in Kannur favour more the units which have political networks; but the long term financial coverage is seen to be highly geared in this group, not because of a decline is net worth but due to highly proportionate increase in financial liabilities in the form of borrowings. The encouragement given by the government through financial stake and other incentives has been the major factor in the formation and growth of women cooperatives. As a result both productivity and efficiency improves in the cooperatives. In short the present study helped to capture the impact, role and dynamics of networking in general and socio political network in particular in relation to intra and inter unit differences on the structure, growth and performance of women industrial cooperatives societies in Kannur district

Population Genetic Structure of the Marine Penaeid Prawn- Penaeus Indicus H. Milne Edwards 1837

The thesis contains the results of an investigation on the " Population Genetic Structure of the Penaeus indicus " from southeast and southwest coasts of India. The P.indicus, popularly known as the Indian white prawn, is distributed widely in the Indo-Pacific, starting from New South wales in Australia in the east to the east coast of Africa in the west. Its heavy demand in the export market, the species has been exploited intensively from all along its areas of distribution in Indian waters. The population genetic characteristics of the species were examined by three independent but complementary techniques, namely, morphometrics (truss network), biochemical genetics (isozyme electrophoresis ) and molecular genetics (RFLP and RAPD). The east and west coast populations of the species may be genetically different. Due to certain constraints, the results obtained from the studies of restriction fragment length 70 polymorphism (RFLP) were limited. The significant difference in the number of bands in the sample populations strongly suggests that these two populations have considerably different population genetic structures