Fabrication Of Potentiometric Sensors For The Determination Of Certain Metal Ions

In this study Fabrication of Potentiometric sensors for the determination of certain metal ions, presents the synthesis and characterization of seven ionophores, their use in the fabrication of potentiometric sensors and the results and discussion of fourteen sensors developed for the determination of five transition metal ions. As part of the present investigations a total of fourteen potentiometric sensors have been developed and fabricated. A three fold approach has been taken in developing he sensors, PVC plasticized membrane sensor, carbon paste electrode and chemically modified carbon paste electrode. All the sensors are highly useful in the determination of metal ions such as manganese, nickel, copper, mercury and lead. A through analytical study has been carried out with respect to each other developed. Based on these studies, optimum conditions have been developed for the quantitative determinations of the selected metal ions using the sensors. Systematic application studies have also been carried out for all the developed sensors and the results revealed that the presently developed sensors are far superior than most of the sensors reported.

Haematological responses of green mussel Perna viridis (Linnaeus) to heavy metals copper and mercury

Department of Marine Biology, Microbiology and Biochemistry, Cochin University of Science and Technology

Electrochemical Reduction and Voltammetric Determination of Metronidazole Benzoate at Modified Carbon Paste Electrode

A metalloporphyrin incorporated carbon paste sensor has been developed for the determination of metronidazole benzoate (MTZB). Zn(II) complex of 5,10,15,20-tetrakis (3-methoxy-4-hydroxy phenyl) porphyrin (TMHPP) was used as the active material. The MTZB gave a well-defined reduction peak at - 0.713V in 0.1 mol l -1 phosphate buffer solution of pH around 7. Compared with bare carbon paste electrode (CPE), the TMHPP Zn(II) modified electrode significantly enhanced the reduction peak current of MTZB as well as lowered its reduction potential. Under optimum conditions the reduction peak current was proportional to MTZB concentration over the range 1×10-3 mol1-1 to 1×10-5mol1-1. The detection limit was found to be 4.36×10-6mol1-1 . This sensor has been successfully applied for the determination of MTZB in pharmaceutical formulations and urine samples.

An Inter-digital Capacitive Electrode Modified as a Pressure Sensor

Inter-digital capacitive electrodes working as electric field sensors have been developed for touch panel applications. Evaluation circuits to convert variations in electric fields in such sensors into computer compatible data are commercially available. We report development of an Interdigital capacitive electrode working as a sensitive pressure sensor in the range 0-120 kPa. Essentially it is a touch/proximity sensor converted into a pressure sensor with a suitable elastomer buffer medium acting as the pressure transmitter. The performance of the sensor has been evaluated and reported. Such sensors can be made very economical in comparison to existing pressure sensors. Moreover, they are very convenient to be fabricated into sensor arrays involving a number of sensors for distributed pressure sensing applications such as in biomedical systems.

Photoemission optogalvanic studies with copper as target electrode

Photoemission optogalvanaic (POG) effect has been observed by irradiating copper target electrode, in a nitrogen discharge cell using 1.06 μm and frequency doubled 532 nm Nd:YAG laser pulse. Measurement of the nature of the variation of POG signal strength with 532 nm laser fluence confirms the two photon induced photoelectric emission from copper. However, using 1.06 μm laser pulses thermally assisted photoemission is observed.

Toxicological effects of Copper and Mercury on the fish Macrones gulio (Hamilton-Buchanan)

Asha M. R This thesis Entitled Toxicological effects of copper and mercury on the fish macerones gulio (hamiloton – buchanan).Chapter 1. In this chapter, a broad outline of heavy metal uptake, requirement of a suitable bio — monitoring organism, criteria for a standard test fish, and suitability of Macrones gulig for the toxicological study are given. Chapter 2. This chapter deals with the lethal toxicity bioassays to find the 96 hr LC 50 of copper and mercury for the fish Macrones gglig. The experimental results indicated that of the two metals tested, copper was more toxic than mercury.Chapter 3. The effect of copper and mercury on the haemoglobin, haematocrit, erythrocyte count, MCV, MCH and MCHC was studied.Chapter 4. The glycogen and protein contents of liver and muscle after exposure to copper and mercury were studied. There was a significant decrease of glycogen in the liver and muscle of metal treated fishes.Chapter 5. The histopathological changes of the tissues like liver, kidney and gill after exposure to copper and mercury were studied.

Studies on the effect of toxic heavy metal mercury on the physiology and biochemistry of an estuarine crab Scylla serrata (Forskal)

This thesis Entitled studies on the effect of toxic heavy metal mercury on the physiology and biochemistry of an estuarine crab scylla serrata (Forskal). Evaluate the toxicity of three sub lethal concentrations of mercury, viz., 0.009 mg/l, 0.02 mg/1, and 0.04 mg/l on the mud crab, Scylla serrata through bioaccumulation, and depuration studies. To characterize the biochemical responses to the sub-lethal stress of mercury in chelate muscles, abdominal muscles, hepatopancreas and gills. To study the activity pattern of acid and alkaline phosphatases in mercury-exposed crabs. To evaluate the induced changes in these tissues through histopathological studies,The Cochin backwaters is one of the most productive and biologically active backwater systems, and is the habitat of varieties of fishes, mollusks, and crustaceans, though this water body also receives tons of effluents from factories located on the banks of the river, Periyar.To study the activity levels of acid and alkaline phosphatases in crabs, at three time periods, exposed to three sub lethal concentration of mercury,

A Study Of The Effect Of Electrode And Overlayer Films On The Electrical Properties Of Certain Metal Films

This thesis consists of a study of the effect of electrode films and overlayer films on the electrical properties of certain metal films. The films have been prepared on glass substrates by thermal evapouration in a vaccum 10 terr. The properties of Al films on Ag, Al,Au and Cu films on In electrodes ,and Bi/Ag bilayer films have been studied. The influence of annealing electrodes at higher temperature on the electrical properties of metal films has also been investigated. Further the effect of varying layer thickness in the bilayer films ,both annealed at higher temperature and annealed at room temperature have been examined.

Chemically Modified Glassy Carbon Electrode as Sensors for Various Pharmaceuticals

Voltammetric methods are applicable for the determination of a wide variety of both organic and inorganic species. Its features are compact equipment, simple sample preparation, short analysis time, high accuracy and sensitivity. Voltammetry is especially suitable for laboratories in which only a few parameters have to be monitored with a moderate sample throughput. Of various electrode materials, glassy carbon electrode is particularly useful because of its high electrical conductivity, impermeability to gases, high chemical resistance, reasonable mechanical and dimensional stability and widest potential range of all carbonaceous electrodes. Electrode modification is a vigorous research area by which the electrochemical determination of various analyte species is facilitated. The scope of pharmaceutical analysis includes the analytical investigation of pure drug, drug formulations, impurities and degradation products of drugs, biological samples containing the drugs and their metabolites with the aim of obtaining data that can contribute to the maximal efficacy and maximal safety of drug therapy. This thesis presents the modification of glassy carbon electrode using metalloporphyrin and dyes and subsequently using these modified electrodes for the determination of various pharmaceuticals. The thesis consists of 9 chapters.