5 resultados para Iosaaf, Metropolitan of Bdin, 14th century.
em Cochin University of Science
Resumo:
Algal blooms are naturally occurring phenomena in the aquatic environment. These blooms cause mass mortalities of wild and farmed fish and shellfish, human intoxications which sometimes result in death, alteration of marine trophic structure through adverse effects on larvae and other life history stages of commercially important species and death of marine animals. Occurrences of harmful algal blooms and associated mortality have been reported along the coastal waters of India since the early period of the last century. The present study was taken up to study the dynamics of major phytoplankton blooms, which occur along the Kerala coast. The results of quantitative and qualitative analysis of phytoplankton in the coastal waters of Vizhinjam and Chombala, their species diversity and community structure is presented and the major algal blooms recorded along the coast of Kerala during the study period is described and their occurrence is related to the hydrographic and meteorological variations. There is a clear evident from these works in the Indian region that the fishes avoid areas where these harmful algae bloom, either due to the toxicity or due to some irritant property of the chemicals secreted by the algae. Taxonomic diversity studies indicated a change in the community structure of commercial finfishes, crustaceans and molluscs due to the bloom of C.marina and funnel plots indicated the deviation in taxonomic distinctness during the bloom period from theoretical mean for the region.
Resumo:
This thesis Entitled entrepreneurship and motivation in small business sector of kerala -A study of rubber products manufacturing industry.Rubber-based industry in Kerala was established only in the first half of the 20th century.the number of licensed manufacturers in the State has increased substantially over the years, particularly in the post- independence period. 54 rubber manufacturing units in 1965-66, the number of licensed rubber-based industrial units has increased to 1300 units in 2001-02. In 2001-02 Kerala occupied the primary position in the number of rubber goods manufacturers in the country.As per the latest report of the Third All India Census of Small Scale Industries 2001-02, Kerala has the third largest number of registered small scale units in the country next after Tamil Nadu and Utter Pradesh.This study of entrepreneurship in the small-scale rubber goods manufacturing industry in Kerala compares a cross section of successful and unsuccessful entrepreneurs with respect to socio-economic characteristics and motivational dynamics. Based on a sample survey of 120 entrepreneurs of Kottayam and Ernakulam districts successful and unsuccessful entrepreneurs were selected using multiple criteria. The study provides guidelines for the development of entrepreneurship in Kerala.The results on the socio-economic survey support the hypothesis that the successful entrepreneurs will differ from unsuccessful entrepreneurs with respect to education, social contacts, initial investment, sales turnover, profits, capital employed, personal income, and number of employees.Successful entrepreneurs were found to be self~starters. Successful entrepreneurs adopted a lot more technological changes than unsuccessful entrepreneurs. Successful entrepreneurs were more innovative — the percent of successful entrepreneurs and unsuccessful entrepreneurs reporting innovations in business were 31.50 and 8.50 percent respectively.
Resumo:
Imprisonment is the most common method of punishment resorted to by almost all legal systems.The new theories of crime causation propounded in the latter half of the nineteenth century gave rise to the feeling that the prisons could be used as appropriate institutions for reforming the offenders. It called for individualisation of punishment.As a result of international movements for humanisation of prisons the judiciary' in tine common law countries started taking active interest in prisoner's treatment.Various studies reveal that much has been done in America to improve the lot of prisoners and to treat them as human beings.The courts there have gone to the extent of saying that there is no iron curtain between a prisoner and the constitution. Most of the rights available to citizens except those which they cannot enjoy due to the conditions of incarceration have also been granted to prisoner.In India also the judiciary has come forward to protect the rights of the prisoners.Maneka Gandhi is a turning point in prisoner's rights.The repeated intervention of courts in prison administration project the view that prisoners have been denied the basic human rights.The High Courts and the Supreme Court of India have been gradually exercising jurisdiction ixl assuming prison justice, including improving the quality of food and amenities, payment of wages and appropriate standards of medical care. Access to courts must be made easier to the aggrieved prisoners.The government should come forward along with some public spirited citizens and voluntary organisations to form a "discharged prisoner“ aid society. The society should exploit opportunities for rehabilitation of prisoners after their release.Most of the prison buildings in the State of Kerala are ill-equipped, ill furnished and without proper ventilation or sanitation and with insufficient water supply arrangements.In India prisoners and prisons today are governed by the old central legislations like Prisons Act l894 Prisoners Act 1900 and the Transfer of Prisoners Act 1950.
Resumo:
The Union Territory of Pondicherry prior to its merger with the Indian Union was a French Colony. The erstwhile territory of Pondicherry along with its hamlets, namely, KARAIKKAL, MAHE and YANAM was administered by the French Regime. Before it was established by French in 1 6 74 A.D. it was part of Vijayanagara Empire. Prior to this, Pondicherry was a part of the Kingdom of Chola and Pallava Kings. During French Regime, the laws which were in force in France in relation to administration of civil and criminal justice were extended to the erstwhile Territory of Pondicherry. Thus while Pondicherry stood influenced by the Inquisitorial system since the beginning of the 18th century, the neighboring states forming part of the Indian Union since Independence came under the Influence of the British system, viz. accusatorial system. The territory of Pondicherry, for administrative reasons, came to be merged with the Indian Union in the early 60's. Following the merger, the Indian administration sought to extent its own laws from time to time replacing erstwhile French Laws, however, subject to certain savings. Thus the transitional period witnessed consequential changes in the administration of the territory, including the sphere of judicial system. Since I 963, the Union Territory of Pondicherry was brought under the spell of the Indian Legal System The people in Pondicherry ' thus have had the benefit of experiencing both the svstems. Their experiences will be of much help to those who undertake comparative studies in law. The plus and minus points of the respective systems help one to develop a detachment that helps independent evaluation of the svstents. The result of these studies could be relevant in revitalising our criminal systems.The present system is evaluated in the light of the past system. New dimensions are added by way' of an empirical study also.
Resumo:
From the early stages of the twentieth century, polyaniline (PANI), a well-known and extensively studied conducting polymer has captured the attention of scientific community owing to its interesting electrical and optical properties. Starting from its structural properties, to the currently pursued optical, electrical and electrochemical properties, extensive investigations on pure PANI and its composites are still much relevant to explore its potentialities to the maximum extent. The synthesis of highly crystalline PANI films with ordered structure and high electrical conductivity has not been pursued in depth yet. Recently, nanostructured PANI and the nanocomposites of PANI have attracted a great deal of research attention owing to the possibilities of applications in optical switching devices, optoelectronics and energy storage devices. The work presented in the thesis is centered around the realization of highly conducting and structurally ordered PANI and its composites for applications mainly in the areas of nonlinear optics and electrochemical energy storage. Out of the vast variety of application fields of PANI, these two areas are specifically selected for the present studies, because of the following observations. The non-linear optical properties and the energy storing properties of PANI depend quite sensitively on the extent of conjugation of the polymer structure, the type and concentration of the dopants added and the type and size of the nano particles selected for making the nanocomposites. The first phase of the work is devoted to the synthesis of highly ordered and conducting films of PANI doped with various dopants and the structural, morphological and electrical characterization followed by the synthesis of metal nanoparticles incorporated PANI samples and the detailed optical characterization in the linear and nonlinear regimes. The second phase of the work comprises the investigations on the prospects of PANI in realizing polymer based rechargeable lithium ion cells with the inherent structural flexibility of polymer systems and environmental safety and stability. Secondary battery systems have become an inevitable part of daily life. They can be found in most of the portable electronic gadgets and recently they have started powering automobiles, although the power generated is low. The efficient storage of electrical energy generated from solar cells is achieved by using suitable secondary battery systems. The development of rechargeable battery systems having excellent charge storage capacity, cyclability, environmental friendliness and flexibility has yet to be realized in practice. Rechargeable Li-ion cells employing cathode active materials like LiCoO2, LiMn2O4, LiFePO4 have got remarkable charge storage capacity with least charge leakage when not in use. However, material toxicity, chance of cell explosion and lack of effective cell recycling mechanism pose significant risk factors which are to be addressed seriously. These cells also lack flexibility in their design due to the structural characteristics of the electrode materials. Global research is directed towards identifying new class of electrode materials with less risk factors and better structural stability and flexibility. Polymer based electrode materials with inherent flexibility, stability and eco-friendliness can be a suitable choice. One of the prime drawbacks of polymer based cathode materials is the low electronic conductivity. Hence the real task with this class of materials is to get better electronic conductivity with good electrical storage capability. Electronic conductivity can be enhanced by using proper dopants. In the designing of rechargeable Li-ion cells with polymer based cathode active materials, the key issue is to identify the optimum lithiation of the polymer cathode which can ensure the highest electronic conductivity and specific charge capacity possible The development of conducting polymer based rechargeable Li-ion cells with high specific capacity and excellent cycling characteristics is a highly competitive area among research and development groups, worldwide. Polymer based rechargeable batteries are specifically attractive due to the environmentally benign nature and the possible constructional flexibility they offer. Among polymers having electrical transport properties suitable for rechargeable battery applications, polyaniline is the most favoured one due to its tunable electrical conducting properties and the availability of cost effective precursor materials for its synthesis. The performance of a battery depends significantly on the characteristics of its integral parts, the cathode, anode and the electrolyte, which in turn depend on the materials used. Many research groups are involved in developing new electrode and electrolyte materials to enhance the overall performance efficiency of the battery. Currently explored electrolytes for Li ion battery applications are in liquid or gel form, which makes well-defined sealing essential. The use of solid electrolytes eliminates the need for containment of liquid electrolytes, which will certainly simplify the cell design and improve the safety and durability. The other advantages of polymer electrolytes include dimensional stability, safety and the ability to prevent lithium dendrite formation. One of the ultimate aims of the present work is to realize all solid state, flexible and environment friendly Li-ion cells with high specific capacity and excellent cycling stability. Part of the present work is hence focused on identifying good polymer based solid electrolytes essential for realizing all solid state polymer based Li ion cells.The present work is an attempt to study the versatile roles of polyaniline in two different fields of technological applications like nonlinear optics and energy storage. Conducting form of doped PANI films with good extent of crystallinity have been realized using a level surface assisted casting method in addition to the generally employed technique of spin coating. Metal nanoparticles embedded PANI offers a rich source for nonlinear optical studies and hence gold and silver nanoparticles have been used for making the nanocomposites in bulk and thin film forms. These PANI nanocomposites are found to exhibit quite dominant third order optical non-linearity. The highlight of these studies is the observation of the interesting phenomenon of the switching between saturable absorption (SA) and reverse saturable absorption (RSA) in the films of Ag/PANI and Au/PANI nanocomposites, which offers prospects of applications in optical switching. The investigations on the energy storage prospects of PANI were carried out on Li enriched PANI which was used as the cathode active material for assembling rechargeable Li-ion cells. For Li enrichment or Li doping of PANI, n-Butyllithium (n-BuLi) in hexanes was used. The Li doping as well as the Li-ion cell assembling were carried out in an argon filled glove box. Coin cells were assembled with Li doped PANI with different doping concentrations, as the cathode, LiPF6 as the electrolyte and Li metal as the anode. These coin cells are found to show reasonably good specific capacity around 22mAh/g and excellent cycling stability and coulombic efficiency around 99%. To improve the specific capacity, composites of Li doped PANI with inorganic cathode active materials like LiFePO4 and LiMn2O4 were synthesized and coin cells were assembled as mentioned earlier to assess the electrochemical capability. The cells assembled using the composite cathodes are found to show significant enhancement in specific capacity to around 40mAh/g. One of the other interesting observations is the complete blocking of the adverse effects of Jahn-Teller distortion, when the composite cathode, PANI-LiMn2O4 is used for assembling the Li-ion cells. This distortion is generally observed, near room temperature, when LiMn2O4 is used as the cathode, which significantly reduces the cycling stability of the cells.