Gill Nets of Kerala

The fishing industry the world over is passing through a critical situation.The landings of marine fishes seemed to have reached saturation in major fishing areas of the world.As a general rule fisheries employing fishing gear and techniques used by small scale and artisanal fishermen either from shore or from onboard small fishing craft come under small-scale fisheries.This study on gill nets of Kerala, the fishing method depended upon by maximum fishermen of the state focuses on the importance of this selective and low energy fishing method in the marine fishing sector of the state.The study opens with the conceptual framework by briefly reviewing the crisis in the marine fisheries sector. Maximum fishermen depend upon gill net, which is, an important selective and low energy fishing gear. A review of relevant literature on aspects such as material, selectivity and techno-economic efficiency together with scope and main objectives of the study form the major part of the compass of the introductory chapter.This survey provided the inputs for selection of centres. The chapter presents the basis for selection of sample centres, sample units and methodology for field and experimental study.The subject matter of the fourth chapter is a basic study on gear aterials. The weathering resistance, which is an important criterion to assess the material performance, was studied for polyamide monofilament in comparison to polyamide multifilament and polyethylene twisted monofilament.The study provides supporting evidence of oxidation and characteristic C-O stretching in polyethylene and cyclic lactam .formation and presence of OH in polyamide.The study indicates that small mesh gill netting can be encouraged as a selective fishing method in the inshore waters with restrained use of 30 and 32 mm mesh sizes. The economic efficiency was assessed using standard indices such as rate of return, internal rate of return, pay back period, fishery income, energy efficiency and factor productivity. The effect of size and cost of capital and cost of production on the economics of operation is also discussed in this chapter. It was observed that level of technology did not have direct effect on economic performance.

studies on Prawn Gill Nets of The Kerala Coast

In the present study. extensive investigations were carried out on various factors affecting the selectivity of prawn gill nets with reference to material, mesh size, coefficient of hanging secolouration. Effect of tidal current on fishing height of prawn gill net and seasonal variation of catch during the course of these investigations were also studied.

Materials for Fish Nets-Their Properties, Selection and Preservation

The properties of synthetic fibres vary with thc inherent physical characteristics of the basic raw materials used mode of preparation of yarns and method of construction of twines. Since the synthetic fibres as maufactured from polymers which are synthesized from simple chemical units, the qualities of man-made fibres can he influenced by the process of manufacture and certain modifications can even be introduced at the processing stage to meet any specific requirement to a certain extent. Hence, an elaborate study of the properties of fish not twines produced has been taken up with a view to determining their suitability for various types of fishing gear with particular reference to conditions prevailing in India.

Some Studies and New Results on Multi Microprocessor Applications

One of the fastest expanding areas of computer exploitation is in embedded systems, whose prime function is not that of computing, but which nevertheless require information processing in order to carry out their prime function. Advances in hardware technology have made multi microprocessor systems a viable alternative to uniprocessor systems in many embedded application areas. This thesis reports the results of investigations carried out on multi microprocessors oriented towards embedded applications, with a view to enhancing throughput and reliability. An ideal controller for multiprocessor operation is developed which would smoothen sharing of routines and enable more powerful and efficient code I data interchange. Results of performance evaluation are appended.A typical application scenario is presented, which calls for classifying tasks based on characteristic features that were identified. The different classes are introduced along with a partitioned storage scheme. Theoretical analysis is also given. A review of schemes available for reducing disc access time is carried out and a new scheme presented. This is found to speed up data base transactions in embedded systems. The significance of software maintenance and adaptation in such applications is highlighted. A novel scheme of prov1d1ng a maintenance folio to system firmware is presented, alongwith experimental results. Processing reliability can be enhanced if facility exists to check if a particular instruction in a stream is appropriate. Likelihood of occurrence of a particular instruction would be more prudent if number of instructions in the set is less. A new organisation is derived to form the basement for further work. Some early results that would help steer the course of the work are presented.

Communication Parameters in the Marine Fisheries Sector of Kerala-A Study of Kollam Coastal Villages

Department of Applied Economics,Cochin University of Science and Technology

Studies on Riverine Fishing Gears of Central Kerala

The overall focus of the thesis involves Studies on the riverine fishing geara of central kerala.Rivers and reservoirs of India harbour a rich and varied spectrum of fishes exceeding 400 species, which include commercially important fishes.The fish and fisheries play a crucial role in kerala's economy,employment generation ,food security and well being of its people.In the present study ,results of investigations conducted during 2001-2002 on riverine fishing gears of central kerala are presented along with detailed description of fishing gears,their distribution and operation covering aspects of selectivity and operational economics.Chapter I gives an introduction to the topiC of the study highlighting the relevance of the study and reviews of the existing literature on fishing gears and practices in riverine sector and sets out objectives of the study.The chapter 11 deals with the Materials and Methods used for the conduct of the investigations. In this chapter the area and the rivers selected for the study. reasons for the selection process and methodologies used for survey of riverine fishing gaear and investigations on design, structure and operation of different gear systems are presented.The chapter III discusses gillnet and its operation. Gill netting is one of the simplest and oldest methods of fishing. They are the most widely operated fishing gear in the rivers of Central Kerala. Gill netting being a low cost fishing method is of special interest for artisanal fisheries. Twenty different types of gillnets are operated in this sector.Chapter IV deals with cast nets. The origin and evolution of cast net has been briefly described in the introductory part.The chapter V deals with fishing lines, traps and other miscellaneous gears.This findings will be useful for riverine fishermen for deployment of appropriate gear systems during different seasons to ensure profitability of fishing operations.

Energy optimisation studies in trawling operations along the Kerala coast

This study mainly deals with the structure of the motorised and mechanised trawl fishing fleet of Kerala, and assess the availability of resources and its extent of exploitation. The study is conducted by observing the performance of small motorised boats operating trawl nets from selected centers along the Kerala coast. The Study also deals with the type and material of construction of the propellers used in selected crafts and the efficiency of the propeller. The fuel consumption pattern of selected medium sized trawlers economics of operation of selected fishing crafts are analyzed through this study. The thesis also Suggest methods for reducing fuel consumption in trawling

Echno economic studies on industrial fishing in the upper east coast of India

The present scenario of industrial fishing in India is that most of large trawlers are based at Visakhapatnam and congregate in the potential shrimp ground in the upper East coast of India commonly known as the Sandheads. These are outriggcr vessels operating two or four trawl nets along with a testing trawl called try net. In the early Seventies these vessels were operating on a very high economic return which was evident from the steady increase in number of outriggers over a period of twenty years. Since the total allowable catch has to be shared by all vessels including the increasing fleet, reduction per vessel output is bound to happen. Therefore some of them could not survive the competition and withdrew from the scene. The number of outriggers did not increase subsequently. However, there arose a doubt whether the existing fleet of about 180 vessels are fishing economically or whether there is any scope for further introduction of industrial vessels in the region. This study is focussing to the techno economic aspects of industrial fishing in the upper East coast of India

"Statistical Methods in Gear Selectivity and Gear Efficiency Studies”

The preceding discussion and review of literature show that studies on gear selectivity have received great attention, while gear efficiency studies do not seem to have received equal consideration. In temperate waters, fishing industry is well organised and relatively large and well equipped vessels and gear are used for commercial fishing and the number of species are less; whereas in tropics particularly in India, small scale fishery dominates the scene and the fishery is multispecies operated upon by nmltigear. Therefore many of the problems faced in India may not exist in developed countries. Perhaps this would be the reason for the paucity of literature on the problems in estimation of relative efficiency. Much work has been carried out in estimating relative efficiency (Pycha, 1962; Pope, 1963; Gulland, 1967; Dickson, 1971 and Collins, 1979). The main subject of interest in the present thesis is an investigation into the problems in the comparison of fishing gears. especially in using classical test procedures with special reference to the prevailing fishing practices (that is. with reference to the catch data generated by the existing system). This has been taken up with a view to standardizing an approach for comparing the efficiency of fishing gear. Besides this, the implications of the terms ‘gear efficiency‘ and ‘gear selectivity‘ have been examined and based on the commonly used selectivity model (Holt, 1963), estimation of the ratio of fishing power of two gear has been considered. An attempt to determine the size of fish for which a gear is most efficient.has also been made. The work has been presented in eight chapters

Temporal pattern of fish production in a microtidal tropical estuary in the south-west coast of India

The status of fisheries and seasonal variation in fish diversity in the Kodungallur-Azhikode Estuary (KAE) were investigated. Total annual average fish production in the estuary declined significantly to 908.6 t with average yield of 5.4 kg ha-1 day-1, when compared to earlier study; where 2747 t was reported. During the present study, 60 species of finfishes (belonging to 34 finfish families), 6 species of penaeid shrimps, 2 species of palaemonid prawns, 2 species of crabs (4 crustacean families), 6 species of bivalves and 2 species of edible oysters (3 molluscan families) were noticed. Finfishes were the major group that contributed 69.62% of total fishery in the estuary and crustaceans (23.47%), bivalves (6.84%) and oysters (0.07%) also formed good fishery. Many of the fish species in the estuary were observed as threatened (Horabagrus brachysoma, Channa striatus, Channa marulius, Clarias batrachus, Heteropneustes fossilis and Wallago attu). The major fishing gears employed in the estuary were gillnets, cast nets, stake nets, scoop nets, ring nets, traps and Chinese dip nets. Gillnets contributed 45% of the total fish catch. Gillnets also showed highest catch per unit effort (CPUE) of 6.91 kg h -1 followed by cast nets (1.85 kg h -1), Chinese dip nets (3.20 kg h -1), stake nets (3.05 kg h -1), ring nets (1.27 kg h -1), hooks and lines (1.35 kg h -1) and scoop nets (0.92 kg h -1). The study implies that temporal changes in fish landing pattern of the KAE was mainly due to environmental variability, habitat modification and fish migration; under the influence of south-west monsoon and anthropogenic activities in the KAE. Results of the study suggest that spatio-temporal variations in the fish community structure could be an indicator for anthropogenic stress and it should be considered for restoration programmes.

Investigations on the structural and operational changes of Ring Seine Fishing Systems of Kerala and its Life Cycle Assessment (lCA)

The study covers theFishing capture technology innovation includes the catching of aquatic animal, using any kind of gear techniques, operated from a vessel. Utilization of fishing techniques varies, depending upon the type of fisheries, and can go from a basic and little hook connected to a line to huge and complex mid water trawls or seines operated by large fishing vessels.The size and autonomy of a fishing vessel is largely determined by its ability to handle, process and store fish in good condition on board, and thus these two characteristics have been greatly influenced by the introduction and utilization of ice and refrigeration machinery. Other technological developments especially hydraulic hauling machinery, fish finding electronics and synthetic twines have also had a major impact on the efficiency and profitability of fishing vessels.A wide variety of fishing gears and practices ranging from small-scale artisanal to advanced mechanised systems are used for fish capture in Kerala. Most important among these fishing gears are trawls, seines, lines, gillnets and entangling nets and traps The modern sector was introduced in 1953 at Neendakara, Shakthikulangara region under the initiative of Indo-Norwegian project (INP). The novel facilities introduced in fishing industry by Indo- Norwegian project accordingly are mechanically operated new boats with new fishing nets. Soon after mechanization, motorization programme gained momentum in Kerala especially in Alleppey, Ernakulam and Kollam districts.