Fundamental Approach to Valuation of Securities -A Study with reference to Information Technology(IT) Sector Shares in Indian Stock Market

Department of Applied Economics,Cochin University of Science and Technology

Socio-Economic Aspects of Sustainable Ecotourism Development: The Case of Kerala

The paper is an attempt to shed light on the socio-economic aspects of the local communities on the development of ecotourism in Kerala. Most of the local communities in the ecotourism destinations are tribes who have been excluded from the mainstream society and are not a part of Kerala’s overall development setting. The paper also tries to situate the community perception on the sustainable livelihood of ecotourism sites of Kerala. Data for the study is obtained from a primary survey by dividing the ecotourism destinations in Kerala into three zones, 230 from south zone, 220 from central zone and 200 from north zone with a total sample size of 650 based on the notion of community based ecotourism initiatives of the state. The result of the study confirms that ecotourism has helped to enhance the livelihood of the marginalized community. With well-knit policies it is possible to tag ecotourism of Kerala as an important tourism destination in the global tourism map

Echno economic studies on industrial fishing in the upper east coast of India

The present scenario of industrial fishing in India is that most of large trawlers are based at Visakhapatnam and congregate in the potential shrimp ground in the upper East coast of India commonly known as the Sandheads. These are outriggcr vessels operating two or four trawl nets along with a testing trawl called try net. In the early Seventies these vessels were operating on a very high economic return which was evident from the steady increase in number of outriggers over a period of twenty years. Since the total allowable catch has to be shared by all vessels including the increasing fleet, reduction per vessel output is bound to happen. Therefore some of them could not survive the competition and withdrew from the scene. The number of outriggers did not increase subsequently. However, there arose a doubt whether the existing fleet of about 180 vessels are fishing economically or whether there is any scope for further introduction of industrial vessels in the region. This study is focussing to the techno economic aspects of industrial fishing in the upper East coast of India

Development of Best Practices for Ship Recycling Processes

Ship recycling has been considered as the best means to dispose off an obsolete ship. The current state of art of technology combined with the demands of sustainable developments from the global maritime industrial sector has modified the status of erstwhile ‘ship breaking’ involving ship scrap business to a modern industry undertaking dismantling of ships and recycling/reusing the dismantled products in a supply chain of pre owned product market by following the principles of recycling. Industries will have to formulate a set of best practices and blend them with the engineering activities for producing better quality products, improving the productivity and for achieving improved performances related to sustainable development. Improved performance by industries in a sustainable development perspective is accomplished only by implementing the 4E principles, ie.,. ecofriendliness, engineering efficiency, energy conservation and ergonomics in their core operations. The present study has done a comprehensive investigation into various ship recycling operations for formulating a set of best practices.Being the ultimate life cycle stage of a ship, ship recycling activities incorporate certain commercial procedures well in advance to facilitate the objectives of dismantling and recycling/reusing of various parts of the vessel. Thorough knowledge regarding these background procedures in ship recycling is essential for examining and understanding the industrial business operations associated with it. As a first step, the practices followed in merchant shipping operations regarding the decision on decommissioning have been and made available in the thesis. Brief description about the positioning methods and important preparations for the most feasible ship recycling method ie.,. beach method have been provided as a part of the outline of the background information. Available sources of guidelines, codes and rules & regulations for ship recycling have been compiled and included in the discussion.Very brief summary of practices in major ship recycling destinations has been prepared and listed for providing an overview of the global ship recycling activities. The present status of ship recycling by treating it as a full fledged engineering industry has been brought out to establish the need for looking into the development of the best practices. Major engineering attributes of ship as a unique engineering product and the significant influencing factors on her life cycle stage operations have been studied and added to the information base on ship recycling. Role of ship recycling industry as an important player in global sustainable development efforts has been reviewed by analysing the benefits of ship recycling. A brief synopsis on the state of art of ship recycling in major international ship recycling centres has also been incorporated in the backdrop knowledgebase generation on ship recycling processes.Publications available in this field have been reviewed and classified into five subject categories viz., Infrastructure for recycling yards and methods of dismantling, Rules regarding ship recycling activities, Environmental and safety aspects of ship recycling, Role of naval architects and ship classification societies, Application of information technology and Demand forecasting. The inference from the literature survey have been summarised and recorded. Noticeable observations in the inference include need of creation of a comprehensive knowledgebase on ship recycling and its effective implementation in the industry and the insignificant involvement of naval architects and shipbuilding engineers in ship recycling industry. These two important inferences and the message conveyed by them have been addressed with due importance in the subsequent part of the present study.As a part of the study the importance of demand forecasting in ship recycling has been introduced and presented. A sample input for ship recycling data for implementation of computer based methods of demand forecasting has been presented in this section of the thesis.The interdisciplinary nature of engineering processes involved in ship recycling has been identified as one of the important features of this industry. The present study has identified more than a dozen major stake holders in ship recycling having their own interests and roles. It has also been observed that most of the ship recycling activities is carried out in South East Asian countries where the beach based ship recycling is done in yards without proper infrastructure support. A model of beach based ship recycling has been developed and the roles, responsibilities and the mutual interactions of the elements of the system have been documented as a part of the study Subsequently the need of a generation of a wide knowledgebase on ship recycling activities as pointed out by the literature survey has been addressed. The information base and source of expertise required to build a broad knowledgebase on ship recycling operations have been identified and tabulated. Eleven important ship recycling processes have been identified and a brief sketch of steps involved in these processes have been examined and addressed in detail. Based on these findings, a detailed sequential disassembly process plan of ship recycling has been prepared and charted. After having established the need of best practices in ship recycling initially, the present study here identifies development of a user friendly expert system for ship recycling process as one of the constituents of the proposed best practises. A user friendly expert system has been developed for beach based ship recycling processes and is named as Ship Recycling Recommender (SRR). Two important functions of SRR, first one for the ‘Administrators’, the stake holders at the helm of the ship recycling affairs and second one for the ‘Users’, the stake holders who execute the actual dismantling have been presented by highlighting the steps involved in the execution of the software. The important output generated, ie.,. recommended practices for ship dismantling processes and safe handling information on materials present onboard have been presented with the help of ship recycling reports generated by the expert system. A brief account of necessity of having a ship recycling work content estimation as part of the best practices has been presented in the study. This is supported by a detailed work estimation schedule for the same as one of the appendices.As mentioned earlier, a definite lack of involvement of naval architect has been observed in development of methodologies for improving the status of ship recycling industry. Present study has put forward a holistic approach to review the status of ship recycling not simply as end of life activity of all ‘time expired’ vessels, but as a focal point of integrating all life cycle activities. A new engineering design philosophy targeting sustainable development of marine industrial domain, named design for ship recycling has been identified, formulated and presented. A new model of ship life cycle has been proposed by adding few stages to the traditional life cycle after analysing their critical role in accomplishing clean and safe end of life and partial dismantling of ships. Two applications of design for ship recycling viz, recyclability of ships and her products and allotment of Green Safety Index for ships have been presented as a part of implementation of the philosophy in actual practice.

Communication Parameters in the Marine Fisheries Sector of Kerala-A Study of Kollam Coastal Villages

Department of Applied Economics,Cochin University of Science and Technology

Performance of District Industries Centers in Kerala : An Application of augmented solow Model

This thesis "Entitled performance of district industries centres in kerala :An application of augmented solow model.The first chapter deals with evolution of approaches for promoting small scale production and the growth of small scale industries in india.the developing countries face the problems like sluggish growth capital shortages high levels of unemployment,enoromous rural-urban economic disparities regional inequalities increasing concentration of capital and chronic difficulities in the export sector.Review of literature and methodology of the study are presented in the second chapter. In the third chapter an attempt has been made to make an in-depth study of the emergence and growth of district of district industries centres.In the chapter four an attempt was made to study the organisational structure of DICs functions and responsibilities assigned to the functional managers and performance of the functionaries.

Economic Impact of Land Reforms in Kerala

The main aim of the present thesis is to dig deep into the once existed tenurial conditions and legislations that were passed to remedy the evils connected with the tenurial Conditions and to highlight ace of the economic impacts of the land reform legislation introduced since 1956.The thesis states that although the misery and exploitation which afflict the rural people and injustice inherent in the social structure can be removed by the strict implementation of land reforms. it is not the single and definite way or liberating the peasantry from its fate. Reform in not an Utopia: it is only the product of a constellation of political and social forces. ‘This study covers a period of twenty four years - ie...1956-1980.

A Comparative Study Of The Organisation And Management Of Notihed Markets In Bangladesh With The Organisation And Management Of Regulated Markets In West Bengal India

For improving agricultural marketing, which has been discussed in the previous chapter, the Government has intervened in different ways. The direct regulatory role through the regulation of markets and market practices is one of the ways in which governmental intervention can improve agricultural marketing. This study is an enquiry of the direct regulatory role of the government through regulation of markets and market practices. By restructuring the operational methods and redesigning the existing physical markets, this system gives direct benefit to the cultivating class and protects them from the market manipulations of organised and powerful private traders. If traders do not continue their trade for the time being they will not be affected financially, because they are resourceful or financially solvent. On the other hand, Cultivators must sell their produce immediately after harvesting for the lack of additional facilities or to satisfy other needs for which finance is required. Another important reason is that Cultivators/farmers are not organised and because of lack of their organisation, they sell their produces individually. In this situation, a farmer is helpless when astute traders indulge in manipulations at the time of purchase of the produces. So it is the government's obligation to protect the interest of the farmers. Protection of the farmer/cultivator is necessary not only from the point of social justice but also from that of economic growth. If the farmers are assured of a remunerative or incentive price for their produce, they will get the inspiration to produce more and through more production, economy will be developed and the nation as a whole will be benefitted. This study will examine the management system of the markets through the direct regulatory role played by the governments to control markets and market practices in West Bengal and Bangladesh.

Studies On The Biology Of The Clam Sunetta Scripta (Linne), From The Subtidal Waters Of Cochin

Enhancement and culture of bivalves presents an opportunity to maximise and even increase production of many growing areas. Clam culture is less intensive both for capital and labour, involves simple farming and management techniques and is considered an efficient means of protein production. Clams are efficient converters of primary production and growth rate is fast with maximum production in 5-6 months. with culture, production is less influenced by poor recruitment. Stable production facilitates market development. Rivalves are being increasingly used in bio-medical research. Culture practices would ensure uninterrupted supplies of experimental material. Paucity of biological data restricts the development of efficient management and culture techniques of bivalves. This study was undertaken with a view to provide information on some aspects of biology of the bivalve S_. scripta which have hitherto been uninvestigated.

Studies on sporulation and propagation in selected agarophytes

Studies on sporulation of four commercially important red (sea-weeds) algae ^(agarophytes) namely Gelidiella acerosa, Gracilaria corticata, G edulis and Hypnea musciformis growing in the vicinity of’ Mandapam coast were carried out from October 1981 to September 1983. During the two years of study; fruiting behavior in the natural population of these species was also investigated. Laboratory experiments were carried out with the four algae sea weeds to collect information on seasonal aspects of spore production and diurnal variation of spore shedding. Detailed studies were made under laboratory conditions to know the effects of some selected environmental factors such as desiccation, salinity, temperature, light intensity and photoperiod on spore output in Gelidiella acerosa, Gracilaria edulis and kypnea musciformis hydrological data were also collected from the inter-tial region around mandapam area. The result obtained on all the above aspects are presented in this thesis

Studies On Preparation And Characterization Of Hts Current Leads Using Multifilamentary Ag And Ag-Alloy Sheathed (Bi,Pb)-2223 Superconducting Tapes

The application vistas of superconductors have widened very much since the discovery of high TC superconductors (HTS) as many of the applications can be realised at 77 K rather than going down to 4.2 K, the liquid He temperature. One such application is the HTS current lead which is used to connect a superconducting system with a room temperature power source. Minimising heat leak to the cryogenic environment is the main advantage of introducing current leads into superconducting systems. The properties of HTSS likes zero resistance (avoiding joule heating) and very low thermal conductivity (minimized conductive heat transfer) make them ideal candidates to be used as current leads. There are two forms of HTS current leads. (i) bulk form (tube or rod) prepared either from YBCO or BSCCO and (ii) tape form prepared from Bi-2223 multifilamentary tapes. The tape form of current leads has many advantages with respect to the mechanical and thermal stability related criteria. Crucial information on various aspects of HTS current lead development are not available in the literature as those are kept proprietary by various companies around the world. The present work has been undertaken to tailor the properties of multifilamentary tapes for the current lead application and to optimise the processing parameters of the same for enhanced critical current density and field tolerance. Also it is the aim of the present investigation is to prepare prototype current leads engineered for operation in conduction cooled mode and test them for operational stability

Economics Of Korai Mat Weaving In Thanjavur District

The main purpose of the study is to examine the economic aspects of the korai mat weaving industry.

Use of Online Information Resources for Knowledge Organisation in Library and Information Centres: A Case Study of CUSAT

The paper discusses the use of online information resources for organising knowledge in library and information centres in Cochin University of Science and Technology (CUSAT). The paper discusses the status and extent of automation in CUSAT library. The use of different online resources and the purposes for which these resources are being used, is explained in detail. Structured interview method was applied for collecting data. It was observed that 67 per cent users consult online resources for assisting knowledge organisation. Library of Congress catalogue is the widely used (100 per cent) online resource followed by OPAC of CUSAT and catalogue of British Library. The main purposes for using these resources are class number building and subject indexing