A Study on India’s Trade Relationship with SAARC Countries with Special Reference to SATA

The present study reveals that there are enormous opportunities for forging closer economic relations among SAARC countries. These opportunities could be fully utilized through the twin processes of trade liberalization and industrial restructuring which are complementary to each other. The SAARC Preferential Trade Arrangement (SAPTA) is the first step in trade liberalization. However, the scope of SAPTA has to be sufficiently widened in order to derive substantial benefits from preferential trading agreements. It is suggested that the SAARC countries adopt a combined approach for tariff elimination, tariff reduction and preferential or concessional tariffs. This process will help in moving quickly towards the creation of a Free Trade Area in the SAARC region. It is necessary to emphasis that, in any regional organization, smaller countries may feel that greater trade co-operation with their larger neighbors may result in larger countries taking over their economies. India occupies 70% of the SAARC region, both geographically and economically, and the remaining 6 nations of the SAARC borders only with India and not with each other. As the biggest, and the most industrialized trading partner among the SAARC countries, India has to recognize that a special responsibility devolves on her and take a lead in making the Regional Economic Co-operation a reality in South Asia.

Studies on grain refinement and alloying additions on the microstructure and mechanical properties of Mg-8Zn-4Al alloy

MAGNESIUM ALLOYS have strong potential for weight reduction in a wide range of technical applications because of their low density compared to other structural metallic materials. Therefore, an extensive growth of magnesium alloys usage in the automobile sector is expected in the coming years to enhance the fuel efficiency through mass reduction. The drawback associated with the use of commercially cheaper Mg-Al based alloys, such as AZ91, AM60 and AM50 are their inferior creep properties above 100ºC due to the presence of discontinuous Mg17A112 phases at the grain boundaries. Although rare earth-based magnesium alloys show better mechanical properties, it is not economically viable to use these alloys in auto industries. Recently, many new Mg-Al based alloy systems have been developed for high temperature applications, which do not contain the Mg17Al12 phase. It has been proved that the addition of a high percentage of zinc (which depends upon the percentage of Al) to binary Mg-Al alloys also ensures the complete removal of the Mg17Al12 phase and hence exhibits superior high temperature properties.ZA84 alloy is one such system, which has 8%Zn in it (Mg-8Zn-4Al-0.2Mn, all are in wt %) and shows superior creep resistance compared to AZ and AM series alloys. These alloys are mostly used in die casting industries. However, there are certain large and heavy components, made up of this alloy by sand castings that show lower mechanical properties because of their coarse microstructure. Moreover, further improvement in their high temperature behaviour through microstructural modification is also an essential task to make this alloy suitable for the replacement of high strength aluminium alloys used in automobile industry. Grain refinement is an effective way to improve the tensile behaviour of engineering alloys. In fact, grain refinement of Mg-Al based alloys is well documented in literature. However, there is no grain refiner commercially available in the market for Mg-Al alloys. It is also reported in the literature that the microstructure of AZ91 alloy is modified through the minor elemental additions such as Sb, Si, Sr, Ca, etc., which enhance its high temperature properties because of the formation of new stable intermetallics. The same strategy can be used with the ZA84 alloy system to improve its high temperature properties further without sacrificing the other properties. The primary objective of the present research work, “Studies on grain refinement and alloying additions on the microstructure and mechanical properties of Mg-8Zn-4Al alloy” is twofold: 1. To investigate the role of individual and combined additions of Sb and Ca on the microstructure and mechanical properties of ZA84 alloy. 2. To synthesis a novel Mg-1wt%Al4C3 master alloy for grain refinement of ZA84 alloy and investigate its effects on mechanical properties.

Grain refinement studies on Mg and Mg-Al based alloys

Demand on magnesium and its alloys is increased significantly in the automotive industry because of their great potential in reducing the weight of components, thus resulting in improvement in fuel efficiency of the vehicle. To date, most of Mg products have been fabricated by casting, especially, by die-casting because of its high productivity, suitable strength, acceptable quality & dimensional accuracy and the components produced through sand, gravity and low pressure die casting are small extent. In fact, higher solidification rate is possible only in high pressure die casting, which results in finer grain size. However, achieving high cooling rate in gravity casting using sand and permanent moulds is a difficult task, which ends with a coarser grain nature and exhibit poor mechanical properties, which is an important aspect of the performance in industrial applications. Grain refinement is technologically attractive because it generally does not adversely affect ductility and toughness, contrary to most other strengthening methods. Therefore formation of fine grain structure in these castings is crucial, in order to improve the mechanical properties of these cast components. Therefore, the present investigation is “GRAIN REFINEMENT STUDIES ON Mg AND Mg-Al BASED ALLOYS”. The primary objective of this present investigation is to study the effect of various grain refining inoculants (Al-4B, Al- 5TiB2 master alloys, Al4C3, Charcoal particles) on Pure Mg and Mg-Al alloys such as AZ31, AZ91 and study their grain refining mechanisms. The second objective of this work is to study the effect of superheating process on the grain size of AZ31, AZ91 Mg alloys with and without inoculants addition. In addition, to study the effect of grain refinement on the mechanical properties of Mg and Mg-Al alloys. The thesis is well organized with seven chapters and the details of the studies are given below in detail.

International Trade and Cochin Port A Historical. and statistical Analysis -- 1881-1980

The overall focus of the thesis involves the International trade and cochin port a historical and statistical analysis 1881-1980.Analysing the trend of exports and imports through cochin port during the course of the last hundred years .This analysis has brought to light some very pertinent facts which , in our opinion,deserve serious consideration of the policy makers,the partise involved in trade and those who are interested in the development of the cochin port.Our study is restricted to twelve commodities -ten commodities of exports and two commodities of imports.The study reveals that the commodities that were exported from cochin are subjected to fluctuations -some mild and others wild. The projections only indicate the potential and unless we are very cautious the chance will be taken away by our competitors .With reference to the development of the port in particular and the states economy in general we would like to make a suggestion .This suggestion relates to declaring cochin as a free port .This will go a long way in the develppment of the port and the state's economy.The sooner it is done the better for the port and the state.

Microbial quality of shrimp products of export trade produced from aquacultured shrimp

Bacteriological quality of individually quick frozen (IQF) shrimp products produced from aquacultured tiger shrimp (Penaeus monodon) has been analysed in terms of aerobic plate count (APC), coliforms, Escherichia coli, coagulase-positive staphylococci, Salmonella, and Listeria monocytogenes. Eight hundred forty-six samples of raw, peeled, and deveined tail-on (RPTO), 928 samples of cooked, peeled, and deveined tail-on (CPTO), 295 samples of headless, undeveined shell-on (HLSO), and 141 samples of raw, peeled, and deveined tail-off (RPND) shrimps were analysed for the above bacteriological parameters. Salmonella was isolated in only one sample of raw, peeled tail-on. Serotyping of the strain revealed that it was S. typhimurium. While none of the cooked, peeled tail-on shrimp samples exceeded the aerobic plate count (APC) of 105 colony forming units per gram (cfu/g), 2.5% of raw, peeled, tail-on, 6.4% of raw, peeled tail-off, and 7.5% of headless shell-on shrimp samples exceeded that level. Coliforms were detected in all the products, though at a low level. Prevalence of coliforms was higher in headless shell-on (26%) shrimps followed by raw, peeled, and deveined tail-off (19%), raw, peeled tail-on (10%), and cooked, peeled tail-on (3.8%) shrimps. While none of the cooked, peeled tail-on shrimp samples were positive for coagulase-positive staphylococci and E. coli, 0.6–1.3% of the raw, peeled tail-on were positive for staphylococci and E. coli, respectively. Prevalence of staphylococci was highest in raw, peeled tail-off (5%) shrimps and the highest prevalence of E. coli (4.8%) was noticed in headless shell-on shrimps. L. monocytogenes was not detected in any of the cooked, peeled tail-on shrimps. Overall results revealed that the plant under investigation had exerted good process control in order to maintain superior bacteriological quality of their products

Marketing Channels in Ornamental Fish Trade in West Bengal

A lucrative export market and high domestic demand has made ornamental fish industry in West Bengal a potential source for income generation. The study aimed to identify: (i) the commercially important size groups of main ornamental fish varieties available in the state; (ii) the existing supply chain; (iii) major constraints for development of the industry; (iv) and to anlayse price spread of commercially important varieties; and (v) to evaluate the profitability of operation at different stakeholder levels in the marketing chain. Export market of ornamental fishes in the state followed a single supply channel while three different distribution channels existed in the domestic market. High electricity charges was the major problem faced by breeders (producers/rearers) whereas lack of technical knowledge regarding transportation was the major constraint for wholesalers. Lack of knowledge on proper health management inhibited the growth of retail industry. The fresh water catfish, angel, molly, arowana, gold fish, tetras, and gouramis showed comparatively higher breeders’ share in consumers’ rupee. Wholesalers were earning comparatively higher annual profit than the other stakeholders due to moderate initial investment and also due to the comparatively lower risk involved.

Marine Product Exports of Kerala in the ASEAN India Free Trade Area: Possibilities and Challenges

In the backdrop of issues encountered by the marine product exports from Kerala in the traditional strongholds of the European Union and the United States, there is a need to target newer markets. The ASEAN India Trade in Goods Agreement (TIGA) though proposes to liberalize trade between India and the ASEAN member nations, fails to deliver greater market access for our marine products in the markets of the ASEAN nations. This can be attributed to factors such as the lower prevailing MFN base rate in the ASEAN nations, tariff reduction commitments reciprocated by them being lesser than India’s offers, inclusion of our prominent items of export in the restrictive lists of most of the ASEAN nations etc. Export forecast suggests that this is a market to be reckoned, which in turn stipulates the need to secure greater concessions and preferential treatment for our marine product exports in the ASEAN nations to capitalize on the gains that have been made

Implication of Trade, Livelihood and Employment Exclusion among Workers in Plantation Sector in Kerala

The first part of the study has focused on the trends in area, production and productivity comparing the state’s performance with of national level performance. Also an attempt was made to understand the trends in commodity price over the years especially in the post liberalization period from the early 1990s. Plantation commodities occupy an important share in the country’s export basket and thereby earning foreign exchange to the national exchequer. Taking into consideration the competitive dimension of natural rubber, cardamom and pepper in the export market was analyzed to see penetration of these commodities in the world market.The second part of the study has tried to understand the plantation workers livelihood by understand the employment generation in the sector. Livelihood assets of plantation workers were analyzed to understand the nature of ownership of various assets. Understanding the poor quality and ownership of various livelihood assets and their relative deprivation the study also tried to understand the income-expenditure patterns and the nature of indebtedness among workers and the factors responsible for deprivation and thereby social exclusion.Area, Production and productivity trends of rubber, pepper and cardamom show a mixed picture. Area, Production trends are impacted greatly by the commodity price of the plantation crops.High correlation exists between commodity price and area and production trends of plantation crops in the state.In terms of Natural Rubber, Kerala experienced a steady growth over the years in terms of area production and productivity as the price of rubber has increasedIn terms of black pepper, the state witnessed a deceleration in growth.In the case of cardamom the area of cultivation declined whereas production increasedProductivity of natural rubber, pepper and cardamom has increased substantially over the yearsEmployment pattern in rubber and spices sub-sector has been analyzed by looking in to the commodity prices so as to see the changes in employment pattern over the years. The study has helped to understand that commodity price and employment generation in plantations are interconnected to such an extent that a fall in the commodity price have greater reverberations on the employment pattern in plantations.Livelihood analysis both in the small and large holdings show that workers belonging to rubber (large and small rubber) plantations have shown better possession of livelihood assets when compared to spices plantation workers as 16.2 percent of the spices sub-sector workers claimed about ownership of house which is considered to be an important and primary livelihood asset.In the case of natural assets like accessibility, availability and duration of water for drinking and other household purposes, the situation of workers in spices plantation still remain poor as around 80 percent of workers depending on public well public taps and canals as source of drinking water.Evaluating financial assets also give clear indication that the road to secure financial assets still remains a distant dream for the workers in plantation sectorEvaluating income and expenditure trends pinpoints to the fact that disparity in terms of income exist among the plantation workersWhile observing the employment though wage levels have improved because of improvement in commodity price of plantation crops, significant improvements are not visible in their livelihood and they remain excluded compared to other sections of the society.