An Experimental Investigation of the Effect of Flange Angle on Radiation Patterns of V-Slot Waveguide Antenna

Results of exhaustive study of the effect of metallic flanges on H-plane radiation characteristics of V-slot waveguide antenna are presented . It has been established that the beam can be sharpened or broadened by varying the flange angle . The adjustment of the flange angle and flange width would further improve the radiation pattern , yielding optimum efficiency from the flanged system

Studies on the Deep - Water Crab Charybdis (Goniohellenus ) Smithii Macleay From the Seas Around India

The present study deals with a general introduction which outlines the objective of the study providing an exhaustive review of works on crabs with particular reference to deep-sea forms. In the first section, Taxonomy and Geographical disribution of the crab are dealt with. The species is described in detail based on several male and female specimens obtained from the pelagic and bottom collections, and its identity in Indian waters is established. It is also distinguished from a closely allied species so far not reported from Indian waters. The second section comprises the biology of the species and it is dealt with under four subheading, namely Habit and Habitats, Reproduction, Food and feeding and Proximate composition. The different habitats occupied by juveniles, subadults and adults of the species have been described and discussed in the light of available information on differential distribution of other related species. The reproductive biology is described in various details touching on gross anatomy and histology of the reproductive systems, spermatogenesis, oogenesis, size at maturity, ovarian maturation process, fecundity, egg carriage and breeding. The food and feeding habits of the species have been studied with reference to the different life stages such as juveniles, subadults and adults during the different phases of life based on stomach content analysis. The percentage of meat recovery and protein, carbohydrate and lipid content of meat have been described in the section dealing with proximate composition. In section three the distribution and abundance of the crab for the entire Indian EEZ and some contiguous ares have been described and illustrated in detail separately for pelagic and benthic realms. The size frequency disrtibution, sex ratios, length weight relationship and relative abundance of breeding population in the experimental catches have been dealt with in detail and discussed.

Development and Analysis of Microstrip Antennas For Dual Band Microwave Communication

The thesis explores the outcome of the exhaustive theoretical and experimental investigations performed on Octagonal Microstrip Antenna configurations. Development of the MATLAB TM backed 3D-Conformal Finite Difference Time Domain (CFDTD)Modeller for the numerical computation of the radiation characteristics of the antenna is the theme of the work. The predicted results are verified experimentally and by IE3D TM simulation. The influence of the patch dimensions,feed configurations,feed dimensions and feed positions upon the radiation performance of the antenna is studied in detail. Octagonal Microstrip Antenna configurations suitable for Mobile-Bluetooth application is dealt in detail. A simple design formula for the regular Octagonal geometry is also presented. A compact planar multi band antenna for GPS/DCS/2.4/5.8GHz WLAN application is included as appendix A. Planar near field measurement technique is explained in appendix B.

Dynamical aspects of coupled Rossler systems: effects of noise

Nonlinear time series analysis is employed to study the complex behaviour exhibited by a coupled pair of Rossler systems. Dimensional analysis with emphasis on the topological correlation dimension and the Kolmogorov entropy of the system is carried out in the coupling parameter space. The regime of phase synchronization is identified and the extent of synchronization between the systems constituting the coupled system is quantified by the phase synchronization index. The effect of noise on the coupling between the systems is also investigated. An exhaustive study of the topological, dynamical and synchronization properties of the nonlinear system under consideration in its characteristic parameter space is attempted.

Printed Monopole Antenna for Ultra Wide Band (UWB) Applications

The thesis is the outcome of the exhaustive theoretical and experimental investigations performed on Printed Monopole Antennas loaded with different geometries .The work presented in this thesis describes the development of a 3D- FDTD(Finite Difference Time Domain) Modeller using MATLAB for the numerical computation of the radiation characteristics of the antenna. The predicted results are verified experimentally and also through simulation using Ansoft HFSS.The effect of top loading of the monopole with different geometries ,the dimensions of the loading patch and ground plane and the material parameters of the dielectric substrate upon the radiation performance of the antenna is studied in detail. Optimized Printed Monopole antennas suitable for Ultra Wide Band (UWB) applications have been developed.

Analysis and Optimization of Machining Process Using Evolutionary Algorithms

To ensure quality of machined products at minimum machining costs and maximum machining effectiveness, it is very important to select optimum parameters when metal cutting machine tools are employed. Traditionally, the experience of the operator plays a major role in the selection of optimum metal cutting conditions. However, attaining optimum values each time by even a skilled operator is difficult. The non-linear nature of the machining process has compelled engineers to search for more effective methods to attain optimization. The design objective preceding most engineering design activities is simply to minimize the cost of production or to maximize the production efficiency. The main aim of research work reported here is to build robust optimization algorithms by exploiting ideas that nature has to offer from its backyard and using it to solve real world optimization problems in manufacturing processes.In this thesis, after conducting an exhaustive literature review, several optimization techniques used in various manufacturing processes have been identified. The selection of optimal cutting parameters, like depth of cut, feed and speed is a very important issue for every machining process. Experiments have been designed using Taguchi technique and dry turning of SS420 has been performed on Kirlosker turn master 35 lathe. Analysis using S/N and ANOVA were performed to find the optimum level and percentage of contribution of each parameter. By using S/N analysis the optimum machining parameters from the experimentation is obtained.Optimization algorithms begin with one or more design solutions supplied by the user and then iteratively check new design solutions, relative search spaces in order to achieve the true optimum solution. A mathematical model has been developed using response surface analysis for surface roughness and the model was validated using published results from literature.Methodologies in optimization such as Simulated annealing (SA), Particle Swarm Optimization (PSO), Conventional Genetic Algorithm (CGA) and Improved Genetic Algorithm (IGA) are applied to optimize machining parameters while dry turning of SS420 material. All the above algorithms were tested for their efficiency, robustness and accuracy and observe how they often outperform conventional optimization method applied to difficult real world problems. The SA, PSO, CGA and IGA codes were developed using MATLAB. For each evolutionary algorithmic method, optimum cutting conditions are provided to achieve better surface finish.The computational results using SA clearly demonstrated that the proposed solution procedure is quite capable in solving such complicated problems effectively and efficiently. Particle Swarm Optimization (PSO) is a relatively recent heuristic search method whose mechanics are inspired by the swarming or collaborative behavior of biological populations. From the results it has been observed that PSO provides better results and also more computationally efficient.Based on the results obtained using CGA and IGA for the optimization of machining process, the proposed IGA provides better results than the conventional GA. The improved genetic algorithm incorporating a stochastic crossover technique and an artificial initial population scheme is developed to provide a faster search mechanism. Finally, a comparison among these algorithms were made for the specific example of dry turning of SS 420 material and arriving at optimum machining parameters of feed, cutting speed, depth of cut and tool nose radius for minimum surface roughness as the criterion. To summarize, the research work fills in conspicuous gaps between research prototypes and industry requirements, by simulating evolutionary procedures seen in nature that optimize its own systems.

Biochemical and molecular investigations on Salmonella serovars from seafood

The present investigation was envisaged to determine the prevalence and identify the different Salmonella serovar in seafood from Cochin area. Though, the distribution of Salmonella serovars in different seafood samples of Cochin has been well documented, the present attempt was made to identify the different Salmonella serovars and determine its prevalence in various seafoods. First pan of this investigation involved the isolation and identification of Salmonella strains with the help of different conventional culture methods. The identified isolates were used for the further investigation i.e. serotyping, this provides the information about the prevalent serovars in seafood. The prevalent Salmonella strains have been further characterized based on the utilization of different sugars and amino acids, to identify the different biovar of a serovar.A major research gap was observed in molecular characterization of Salmonella in seafood. Though, previous investigations reported the large number of Salmonella serovars from food sources in India, yet, very few work has been reported regarding genetic characterization of Salmonella serovars associated with food. Second part of this thesis deals with different molecular fingerprint profiles of the Salmonella serovars from seafood. Various molecular typing methods such as plasmid profiling, characterization of virulence genes, PFGE, PCR- ribotyping, and ERIC—PCR have been used for the genetic characterization of Salmonella serovars.The conventional culture methods are mainly used for the identification of Salmonella in seafood and most of the investigations from India and abroad showed the usage of culture method for detection of Salmonella in seafood. Hence, development of indigenous, rapid molecular method is most desirable for screening of Salmonella in large number of seafood samples at a shorter time period. Final part of this study attempted to develop alternative, rapid molecular detection method for the detection of Salmonella in seafood. Rapid eight—hour PCR assay has been developed for detection of Salmonella in seafood. The performance of three different methods viz., culture, ELISA and PCR assays were evaluated for detection of Salmonella in seafood and the results were statistically analyzed. Presence of Salmonella cells in food and enviromnental has been reported low in number, hence, more sensitive method for enumeration of Salmonella in food sample need to be developed. A quantitative realtime PCR has been developed for detection of Salmonella in seafood. This method would be useful for quantitative detection of Salmonella in seafood.

Studies on the Effects of Bottom Trawling on the Benthic Fauna off Veraval Coast, Gujarat

Bottom trawling is one among the most destructive human induced physical disturbances inflicted to seabed and its living communities. The bottom trawls are designed to tow along the sea floor, which on its operation indiscriminately smashes everything on their way crushing, killing, burying and exposing to predators the benthic fauna. Bottom trawling causes physical and biological damages that are irreversible, extensive and long lasting. The commercial trawling fleet of India consists of 29,241 small and medium-fishing boats. The northwest coast of India has the largest fishing fleet consisting of 23,618 mechanized vessels, especially the bottom trawlers. However, attempts were not made to study the impact of bottom trawling along Northwest coast of India. The estimated optimum fleet size of Gujarat is 1,473 mechanised trawlers while 7402 commercial trawlers are operated from the coast of Gujarat. Veraval port was designed initially for 1,200 fishing trawlers but 2793 trawlers are being operated from this port making it the largest trawler port of Gujarat. The aim of this study was to investigate the effects of bottom trawling on the substratum and the associated benthic communities of commercial trawling grounds of Veraval coast. The study compared the differences between the samples collected before and after experimental trawling to detect the impacts of bottom trawling. Attempts were made to assess the possible impact of bottom trawling on:(i) the sediment characteristics (ii)the sediment heavy metals (iii) epifauna (iv) macrobenthos and (v) meiobenthos. This study is expected to generate information on trawling impacts of the studied area that will help in better management of the biological diversity and integrity of the benthic fauna off Veraval coast. An exhaustive review on the studies conducted around the world and in India on impact of bottom trawling on the benthic fauna is also detailed.In the present study, the bottom trawling induced variations on sediment organic matter, epifauna, macrobenthos and meiobenthos were evident. It was also observed that the seasonal/ natural variations were more prominent masking the trawling effect on sediment texture and heavy metals. Enforcement of control of excess bottom trawlers and popularization of semi pelagic trawls designed to operate a little distance above the sea bottom for off bottom resources will minimize disturbance on the sea bottom. Training and creating awareness in responsible fishing should be made mandatory requirements, to the coastal communities. They should be made wardens to protect the valuable resources for the benefit of sustainability. To protect the biodiversity and ecosystem health, the imminent need is to survey and make catalogue, identification of sensitive areas or hot spots and to adopt management strategies for the conservation and biodiversity protection of benthic fauna. The present study is a pioneering work carried out along Veraval coast. This thesis will provide a major fillip to the studies on impact of bottom trawling on the benthic fauna along the coast of India.

Studies on ASE, Lasing and NLO characteristics in Certain Laser Dyes

Observing the wide possibilities of fluorescent dyes, an exhaustive investigation is done in laser dyes mainly focusing on Coumarin 540 which has a very strong emission in the green region. The photophysics of the dye is studied in detail in a good number of solvent environments. The results of the amplified spontaneous emission and lasing behaviour in both dye solution and different polymer solid state matrices and the ptotostability of the these matrices are investigated using the photoacoustic technique and the same are also included in this thesis. The energy transfer behaviour in dye mixtures which could be utilized for laser studies and bio-analysis are also presented. The nonlinear characterization of Coumarin540 forms the last part of the experimental investigations presented in the thesis.

Legal Protection for Consumer of Pharmaceutical Products

The overall focus of the thesis involves the legal protection for consumers of pharmaceutical products.The work on “Legal Protection for Consumers of Pharmaceutical Products” is undertaken to study the legal framework that is existing for this purpose and the functioning of regulating mechanism that is envisaged under it. The purpose of the study is to analyse how far these measures are effective in adequately protecting various aspects of consumer interest. Methodology adopted for the study is analytical.The present study revealed that the theory of freedom of contract is only an ideal relevant when the parties are assumed to be on equal footing.In a more complicated social and economic society, it ceased to have any relevance. Many countries in the world enacted legislations to protect the consumers of pharmaceutical products.The meaning of ‘consumers of drugs’ provided in the law is inclusive and not exhaustive one. The definition of ‘drug’ as interpreted by the courts is comprehensive enough to take in it not only medicines but also substances. The meaning of the word substances has been widened by the interpretation of the courts so as to include all the things used in treatment.The definition of the word ‘consumer’ has been liberally interpreted by the courts so as to provide protective net to a large section of the public.The studies subsequent to this report also revealed that there is a shortage of essential drugs necessary to cure local diseases like tuberculosis and malaria where as drugs containing vitamins and other combinations which are more profitable for the manufacturers are produced and marketed in abundance.The study of the provisions in this regard revealed that the duty of the drug controlling authorities is confined to scrutinize the data of the clinical test already conducted by the sponsor of the drug.Study of the clinical trial procedure under the U.S. law revealed that there is a continuous supervision over clinical trials and controls are provided on the treatment use of an investigational productStudy of the clinical trial procedure under the U.S. law revealed that there is a continuous supervision over clinical trials and controls are provided on the treatment use of an investigational product.the study of the provisions of the Drugs and Cosmetics Act and the rules framed under it revealed that the law in this regard is comprehensive to protect the consumer provided it is sufficiently supported by adequately equipped enforcement machinery.

On infinite graphs and related matrices

This thesis Entitled On Infinite graphs and related matrices.ln the last two decades (iraph theory has captured wide attraction as a Mathematical model for any system involving a binary relation. The theory is intimately related to many other branches of Mathematics including Matrix Theory Group theory. Probability. Topology and Combinatorics . and has applications in many other disciplines..Any sort of study on infinite graphs naturally involves an attempt to extend the well known results on the much familiar finite graphs. A graph is completely determined by either its adjacencies or its incidences. A matrix can convey this information completely. This makes a proper labelling of the vertices. edges and any other elements considered, an inevitable process. Many types of labelling of finite graphs as Cordial labelling, Egyptian labelling, Arithmetic labeling and Magical labelling are available in the literature. The number of matrices associated with a finite graph are too many For a study ofthis type to be exhaustive. A large number of theorems have been established by various authors for finite matrices. The extension of these results to infinite matrices associated with infinite graphs is neither obvious nor always possible due to convergence problems. In this thesis our attempt is to obtain theorems of a similar nature on infinite graphs and infinite matrices. We consider the three most commonly used matrices or operators, namely, the adjacency matrix

Studies on the effect of the organophosphorus pesticide Eka(Rlu) x EC 25 on the bacterial flora of Villorita cyprinoides var. cochinensis (Han1ey)

The thesis is Studies on the Effect or the Obganophosphorus Pesticide Ekalux(R) EC 25 on the Bacterial Flora or Villorita Cyprinoides Var.Cochinensis (Hanley). For the present investigation, the black clam Villorita gyprinoides var. cochinensis (Hanley), a most common clam genus present in this estuarine system has been selected as test organaism and Ekalux (R) EC 25 as toxicant. The aspects dealt with are 1. Total heterotrophic bacterial population, 2. Generic composition, 3. Hydrolytic enzyme producing bacteria, 4. Antibiotic resistance, 5. Heavy metal resistance, 6. The effect of pesticide concentration on the growth of the bacteria and 7. Effect of temperature, pH and sodium chloride on the growth and phosphate release of selected isolates.The samples for the experiment were collected from the Vembanad Lake, near Kumbalam Island during the period of September 1985 to May '86. The THB of the estuarine water and clams contained 6.5 x I04/ml and 2.975 x l06/g respectively, immediately after collection. Untreated water and clam samples showed enormous increase in THB from 0 hr population. The treated samples (water and clams) contained higher THB than 0 hr. In general, THB was observed to increase tremendously in the samples treated with pesticide when compared to their native flora. With reference to various concentrations of pesticides, THB recorded an increase with increase of concentration in water and clam samples.

Customer perceptions of Banking Products and Services in Kerala with reference to Specific Customer Segments in the Urban Area

As of 1999. the state of Kerala has 3210 offices of scheduled commercial banks (SCBS). In all, there are 48 commercial banks operating in Kerala, which includes PSBs, OPBs, NPBS. FBs, and Gramin Banks. The urban areas give a complete picture of the competition in the present day banking scenario with the presence of all bank groups. Semi-urban areas of Kerala have 2196 and urban areas have 593 as on March 1995.“ The study focuses on the selected segments ofthe urban customers in Kerala which is capable of giving the finer aspects of variation in customer behaviour in the purchase of banking products and services. Considering the exhaustive nature of such an exercise, all the districts in the state have not been brought under the purview of the study. Instead. three districts with largest volume of business in terms of deposits, advances, and number of offices have been short listed as representative regions for a focused study. The study focuses on the retail customer segment and their perceptions on the various products or services offered to them. Non Resident Indians (NRIs), and Traders and Small—ScaIe Industries segments have also been included in the study with a view to obtain a comparative picture with respect to perception on customer satisfaction and service quality dimensions and bank choice behaviour. The research is hence confined to customer behaviour and the implications for possible strategies for segmentation within the retail segment customers

A study of the co-operative banking system in kerala

The co-operative credit structure in a state set up consists of 3 tiers — Primary Societies at the base, District Co-operative Banks at the middle and State Cooperative Bank at the top. But, some societies at the primary level are governed by, in addition to Co-operative Societies Act, the Banking Regulation Act. Thus they are under dual control. In addition, they are working under the direct purview of Reserve Bank of India. The scope of this study is restricted to such Primary Societies, District Co-operative Banks and State Co-operative Bank. For the evaluation of the working of Co-operative Banks, the board of directors and staff were interviewed with the help of pre-constructed and pre-tested interview schedules. However, the share holders and customers were not interviewed mainly because almost all respondents were reluctant to provide copies of an exhaustive list of share holders and non-share holder customers, for the purpose of maintaining secrecy. This being an individual work, it was found physically and financially very difficult to extend the study so as to cover the share holders and non-share holder customers. Limitations of time were also responsible for restricting this study. The period of study was restricted to 1980-'81 to 1983-'84 as the data relating to earlier periods were firstly not available from all banks and secondly the prior data was considered out of date for the purpose of the study.

Studies on fish lipases

Lipids constitute a significant portion of the biomass of earth and lipolytic enzymes play a very important role in lipid turn over. Apart from their biological significance, lipolytic enzymes are also very important in the fields of nutrition, food technology, medicine and preparative and analytical lipid biochemistry. Recent developments in the study of proteins and enzymes have largely benefited the study of lipolytic enzymes, that some of these enzymes were isolated in pure form. Even today there is a continuous search for new and potent sources of these lipolytic enzymes. The zest for elucidating the structure and mechanism of action of the enzymes obtained in pure form for biochemist still remains unabated. The literature shows no record of such an effort for the study of lipases from marine sources. The fact that many fishes like oil sardine, mackerel, cat fish, seer etc. contains large amounts of lipid shows the possibility of the existence of lipases in significant amounts necessitating their exhaustive study. Such a study will, not only provide alternate sources for lipase but also will provide methods to curb lipolysis and the resultant rancidity and off flavor development in fish and fishery products.