14 resultados para Employment of funds

em Cochin University of Science


Relevância:

100.00% 100.00%

Publicador:

Resumo:

The co-operative credit structure in a state set up consists of 3 tiers — Primary Societies at the base, District Co-operative Banks at the middle and State Cooperative Bank at the top. But, some societies at the primary level are governed by, in addition to Co-operative Societies Act, the Banking Regulation Act. Thus they are under dual control. In addition, they are working under the direct purview of Reserve Bank of India. The scope of this study is restricted to such Primary Societies, District Co-operative Banks and State Co-operative Bank. For the evaluation of the working of Co-operative Banks, the board of directors and staff were interviewed with the help of pre-constructed and pre-tested interview schedules. However, the share holders and customers were not interviewed mainly because almost all respondents were reluctant to provide copies of an exhaustive list of share holders and non-share holder customers, for the purpose of maintaining secrecy. This being an individual work, it was found physically and financially very difficult to extend the study so as to cover the share holders and non-share holder customers. Limitations of time were also responsible for restricting this study. The period of study was restricted to 1980-'81 to 1983-'84 as the data relating to earlier periods were firstly not available from all banks and secondly the prior data was considered out of date for the purpose of the study.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The The The The growing demandgrowing demandgrowing demandgrowing demandgrowing demandgrowing demandgrowing demandgrowing demandgrowing demandgrowing demandgrowing demandgrowing demandgrowing demand for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of for the expansion of the the the the publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system publicly funded system of education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goodof education as merit and free goods emphasized emphasized emphasized emphasized emphasized emphasized emphasized emphasized emphasized emphasized on large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation large allocation of funds on of funds on of funds on of funds on of funds on of funds on of funds on of funds on of funds on of funds on of funds for promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting educationfor promoting education. Compared to . Compared to . Compared to . Compared to . Compared to . Compared to . Compared to . Compared to . Compared to . Compared to . Compared to . Compared to . Compared to the rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of Indiathe rest of India, Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead , Kerala is far ahead in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect in this respect primarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the eprimarily because of the earlierarlierarlierarlierarlierarlier political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social political and social compulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions ofcompulsions of the state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The prethe state. The presumption of sumption of sumption of sumption of sumption of sumption of sumption of sumption of sumption of sumption of sumption of assured assured assured assured assured assured assured assured and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed and guaranteed employment in employment in employment in employment in employment in employment in employment in employment in employment in employment in employment in employment in the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East the Middle East and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other and also in other countries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased furthecountries increased further the scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher educationthe scope of higher education in KeralaKeralaKeralaKeralaKeralaKerala, particularparticularparticularparticularparticularparticularparticularparticularparticularparticularly the technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe technical educationthe

Relevância:

100.00% 100.00%

Publicador:

Resumo:

The basic objective of the present study has been to observe the process and pattern of employment diversification among the rural women workers in Ernakulam district. The evidences are that the women workers in the rural areas of the state are being increasingly diversified into the tertiary sector. The clear cut evidence for the fact that in Kerala non-agricultural employment of rural women is increasing with more and more of them getting diversified into the tertiary sector. The women get more self esteem and recognition in terms of the work being done by them. In the urban areas of the state as a poverty eradicating measure the Kerala government has already introduced a new scheme under the banner of Kudumbasree. Another fact noticed in the study that the sectoral shift of women workers has posed a grave problem to the agricultural sector. The reluctance of workers to do manual jobs on land and the prevalence of high wages among the agricultural labours has left many a cultivable area fallow or has induced farmers to shift to less labour –intensive crops. The situation is expected to worsen in future as even the high wages fail to attract the young generation to this sector. To conclude the study has fulfilled all its objectives, viz; highlighting the rural employment structure in Kerala, examining the process, pattern, determinants and consequences of diversification among rural women workers in the sample villages. Being the first of its kind at the micro level in the state it contributes to the available literature in the area enriching the database that is crucially lacking for devising projects at the village and block-level. There exists ample scope for future research of similar nature in an urban background where the secondary data-sources are hinding towards a reversal of trends from non-agriculture to agriculture.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The present study is on the nature, problems and prospects of the handloom industry in Kerala. The problems of the industry are mostly in the nature of low earnings of the workers, underutilisation of the existing capacity and low profit in its various sectors. The majority of the handloom co-operative societies are either dormant or facing liquidation. The income and employment of weavers are so pitiably low that they are living in utter poverty and starvation. Frequent price fluctuations of yarns, dyes and chemicals increase the cost of production and reduce the profitability. Consequently handloom fabrics are not able to compete with mill cloths and powerloom products. Accumulating the unsold stocks in the godowns of co-operative societies and with master weavers has become the practice of the day. Spinning mills in Kerala are producing only lower counts of yarns. S, handloom industry has to depend on textile mills in Tamil Nadu for higher counts of yarn. They create artificial scarcity and increase the prices exflorbitantly. Wage rates prevailing in Kerala are higher than those in Tamil Hadu. So rich master weavers are migrating to Tamil.Nadu and exporting the fabrics. under the label 'Kera1a Handlooms'. Governmental efforts to tackle the crisis by way of rebates and subsidies are found to be futile.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Introduction of agrarian reforms and introduction of new technology increased dependence on casual labourers. High labour absorption in the subsistence agriculture and increased price of input resulted in high cost of cultivation. Price of paddy did not rise correspondingly. As a result subsistence economy's future is bleak. The purpose of the _study is to examine these arguments and related issues with the help of empirical evidence from Kuttanad. The credit schemes are designed to help farmers to earn higher incomes by larger output brought either by an increase in area or by an improvement in yield rates or both. It is difficult to isolate the impact of agricultural credit on agricultural development. Because agricultural development is the combined effect of all inputs. The specific .criteria selected for analysing the impact of agricultural icredit are how increased supply of credit would bring changes ‘in capital formation, agrarian relations, informal lending and its cost and the changes in area, output, introduction of new technology, income, savings and employment of farm households.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The concept of social clause has been accepted in the GATT agreement to prescribe the labour standards. Social clause , $tands for protecting labour standards, more specificalfy prohibition of employment of children in hazardous industries, providing adequate wages. healthy and hygienic working conditions, special social welfare protection for women, prescription of hours of work and rest and provision for efficacious remedy in case of default by employer to provide these conditions to his workers.

Relevância:

90.00% 90.00%

Publicador:

Resumo:

Magnetic materials meant for audio/video recording applications necessitate that polycrystalline materials be in acicular shape. So preparation of acicular precursors for magnetic storage materials assumes significance. The employment of aqueous solutions do not produce needle shape crystallites. Glycerol is one of the complexing media used for the precipitation of ferrous oxalate dihydrate. An inexpensive method using starch for preparation of acicular particles is described. The influence of an additive namely Gd on acicularity is also investigated

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The Human race of our century is in gluttonous search for novel engineering products which led to a skyrocketed progress in research and fabrication of filled polymers. Recently, a big window has been opened up for speciality polymers especially elastomers with promising properties. Among the many reasons why rubbers are widely used in the process industries, three are considered as important. Firstly, rubbers operate in a variety of environments and possess usable ranges of deformity and durability and can be exploited through suitable and more or less conventional equipment design principles. Secondly, rubber is an eminently suitable construction material for protection against corrosion in the chemical plant and equipment against various corrosive chemicals as, acids and alkalies and if property tailored, can shield ionising radiations as X-rays and gamma rays in medical industry, with minimum maintenance lower down time, negligible corrosion and a preferred choice for aggressive corroding and ionising environment. Thirdly, rubber can readily and hastily, and at a relatively lower cost, be converted into serviceable products, having intricate shapes and dimensions. In a century’s gap, large employment of flexible polymer materials in the different segments of industry has stimulated the development of new materials with special properties, which paved its way to the synthesis of various nanoscale materials. At nano scale, one makes an entry into a world where multidisciplinary sciences meet and utilises the previously unapproached infinitesimal length scale, having dimension which measure upto one billionth of a meter, to create novel properties. The nano fillers augment the elastomers properties in an astonishing fashion due to their multifunctional nature and unprecedented properties have been exhibited by these polymer-nanocomposites just to beat the shortcomings of traditional micro composites. The current research aims to investigate the possibility of using synthesised nano barium sulphate for fabricating elastomer-based nanocomposites and thereby imparting several properties to the rubber. In this thesis, nano materials, their synthesis, structure, properties and applications are studied. The properties of barium sulphate like chemical resistance and radiopacity have been utilized in the present study and is imparted to the elastomers by preparing composites

Relevância:

90.00% 90.00%

Publicador:

Resumo:

The Human race of our century is in gluttonous search for novel engineering products which led to a skyrocketed progress in research and fabrication of filled polymers. Recently, a big window has been opened up for speciality polymers especially elastomers with promising properties. Among the many reasons why rubbers are widely used in the process industries, three are considered as important. Firstly, rubbers operate in a variety of environments and possess usable ranges of deformity and durability and can be exploited through suitable and more or less conventional equipment design principles. Secondly, rubber is an eminently suitable construction material for protection against corrosion in the chemical plant and equipment against various corrosive chemicals as, acids and alkalies and if property tailored, can shield ionising radiations as X-rays and gamma rays in medical industry, with minimum maintenance lower down time, negligible corrosion and a preferred choice for aggressive corroding and ionising environment. Thirdly, rubber can readily and hastily, and at a relatively lower cost, be converted into serviceable products, having intricate shapes and dimensions. In a century’s gap, large employment of flexible polymer materials in the different segments of industry has stimulated the development of new materials with special properties, which paved its way to the synthesis of various nanoscale materials. At nano scale, one makes an entry into a world where multidisciplinary sciences meet and utilises the previously unapproached infinitesimal length scale, having dimension which measure upto one billionth of a meter, to create novel properties. The nano fillers augment the elastomers properties in an astonishing fashion due to their multifunctional nature and unprecedented properties have been exhibited by these polymer-nanocomposites just to beat the shortcomings of traditional micro composites. The current research aims to investigate the possibility of using synthesised nano barium sulphate for fabricating elastomer-based nanocomposites and thereby imparting several properties to the rubber. In this thesis, nano materials, their synthesis, structure, properties and applications are studied. The properties of barium sulphate like chemical resistance and radiopacity have been utilized in the present study and is imparted to the elastomers by preparing composites.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Women participating in work outside home and the resultant change in Labour market structure placeing female labour as a strong component were breakthrough of twentieth centry. The major share of women labourers in India is crowding in agriculture, household industries and other traditional sectors. Shift in cropping pattern has adverse impacts on female labour. Female labour lost opportunities in the labour market this has adverse impact on family consumption. The study is directed to investigate the impact of female labour saving shift in cropping on female labour force participation and the resultant change in household consumption pattern the specific objectives this study are impact of change in the cropping pattern on employment, change female employment, family consumption pattern and changing situations of womenlabour in agriculture sector.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

This proposed thesis is entitled “Plasma Polymerised Organic Thin Films: A study on the Structural, Electrical, and Nonlinear Optical Properties for Possible Applications. Polymers and polymer based materials find enormous applications in the realm of electronics and optoelectronics. They are employed as both active and passive components in making various devices. Enormous research activities are going on in this area for the last three decades or so, and many useful contributions are made quite accidentally. Conducting polymers is such a discovery, and eversince the discovery of conducting polyacetylene, a new branch of science itself has emerged in the form of synthetic metals. Conducting polymers are useful materials for many applications like polymer displays, high density data storage, polymer FETs, polymer LEDs, photo voltaic devices and electrochemical cells. With the emergence of molecular electronics and its potential in finding useful applications, organic thin films are receiving an unusual attention by scientists and engineers alike. This is evident from the vast literature pertaining to this field appearing in various journals. Recently, computer aided design of organic molecules have added further impetus to the ongoing research activities in this area. Polymers, especially, conducting polymers can be prepared both in the bulk and in the thinfilm form. However, many applications necessitate that they are grown in the thin film form either as free standing or on appropriate substrates. As far as their bulk counterparts are concerned, they can be prepared by various polymerisation techniques such as chemical routes and electrochemical means. A survey of the literature reveals that polymers like polyaniline, polypyrrole, polythiophene, have been investigated with a view to studying their structural electrical and optical properties. Among the various alternate techniques employed for the preparation of polymer thin films, the method of plasma polymerisation needs special attention in this context. The technique of plasma polymerisation is an inexpensive method and often requires very less infra structure. This method includes the employment of ac, rf, dc, microwave and pulsed sources. They produce pinhole free homogeneous films on appropriate substrates under controlled conditions. In conventional plasma polymerisation set up, the monomer is fed into an evacuated chamber and an ac/rf/dc/ w/pulsed discharge is created which enables the monomer species to dissociate, leading to the formation of polymer thin films. However, it has been found that the structure and hence the properties exhibited by plasma polymerized thin films are quite different from that of their counterparts produced by other thin film preparation techniques such as electrochemical deposition or spin coating. The properties of these thin films can be tuned only if the interrelationship between the structure and other properties are understood from a fundamental point of view. So very often, a through evaluation of the various properties is a pre-requisite for tailoring the properties of the thin films for applications. It has been found that conjugation is a necessary condition for enhancing the conductivity of polymer thin films. RF technique of plasma polymerisation is an excellent tool to induce conjugation and this modifies the electrical properties too. Both oxidative and reductive doping can be employed to modify the electrical properties of the polymer thin films for various applications. This is where organic thin films based on polymers scored over inorganic thin films, where in large area devices can be fabricated with organic semiconductors which is difficult to achieve by inorganic materials. For such applications, a variety of polymers have been synthesized such as polyaniline, polythiophene, polypyrrole etc. There are newer polymers added to this family every now and then. There are many virgin areas where plasma polymers are yet to make a foray namely low-k dielectrics or as potential nonlinear optical materials such as optical limiters. There are also many materials which are not been prepared by the method of plasma polymerisation. Some of the materials which are not been dealt with are phenyl hydrazine and tea tree oil. The advantage of employing organic extracts like tea tree oil monomers as precursors for making plasma polymers is that there can be value addition to the already existing uses and possibility exists in converting them to electronic grade materials, especially semiconductors and optically active materials for photonic applications. One of the major motivations of this study is to synthesize plasma polymer thin films based on aniline, phenyl hydrazine, pyrrole, tea tree oil and eucalyptus oil by employing both rf and ac plasma polymerisation techniques. This will be carried out with the objective of growing thin films on various substrates such as glass, quartz and indium tin oxide (ITO) coated glass. There are various properties namely structural, electrical, dielectric permittivity, nonlinear optical properties which are to be evaluated to establish the relationship with the structure and the other properties. Special emphasis will be laid in evaluating the optical parameters like refractive index (n), extinction coefficient (k), the real and imaginary components of dielectric constant and the optical transition energies of the polymer thin films from the spectroscopic ellipsometric studies. Apart from evaluating these physical constants, it is also possible to predict whether a material exhibit nonlinear optical properties by ellipsometric investigations. So further studies using open aperture z-scan technique in order to evaluate the nonlinear optical properties of a few selected samples which are potential nonlinear optical materials is another objective of the present study. It will be another endeavour to offer an appropriate explanation for the nonlinear optical properties displayed by these films. Doping of plasma polymers is found to modify both the electrical conductivity and optical properties. Iodine is found to modify the properties of the polymer thin films. However insitu iodine doping is tricky and the film often looses its stability because of the escape of iodine. An appropriate insitu technique of doping will be developed to dope iodine in to the plasma polymerized thin films. Doping of polymer thin films with iodine results in improved and modified optical and electrical properties. However it requires tools like FTIR and UV-Vis-NIR spectroscopy to elucidate the structural and optical modifications imparted to the polymer films. This will be attempted here to establish the role of iodine in the modification of the properties exhibited by the films

Relevância:

80.00% 80.00%

Publicador:

Resumo:

The thesis provides an overall review and introduction to amorphous semiconductors, followed by a brief discussion on the important structural models proposed for chalcogenide glasses and their electrical, optional and thermal properties. It also gives a brief description of the Physics of thin films, ion implantation and Photothermal Deflection Spectroscopy. A brief description of the experimental setup of a photothermal deflection spectrometer and the details of the preparation and optical characterization of the thin film samples. It deals with the employment of the subgap optional absorption measurement by PDS to characterize the defects, amorphization and annealing behavior in silicon implanted with B+ ions and the profiles of ion range and vacancy distribution obtained by the TRIM simulation. It reports the results of all absorption measurements by PDS in nitrogen implanted thin film samples of Ge-Se and As-Se systems

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Thermally stable materials with low dielectric constant (k < 3.9) are being hotly pursued. They are essential as interlayer dielectrics/intermetal dielectrics in integrated circuit technology, which reduces parasitic capacitance and decreases the RC time constant. Most of the currently employed materials are based on silicon. Low k films based on organic polymers are supposed to be a viable alternative as they are easily processable and can be synthesized with simpler techniques. It is known that the employment of ac/rf plasma polymerization yields good quality organic thin films, which are homogenous, pinhole free and thermally stable. These polymer thin films are potential candidates for fabricating Schottky devices, storage batteries, LEDs, sensors, super capacitors and for EMI shielding. Recently, great efforts have been made in finding alternative methods to prepare low dielectric constant thin films in place of silicon-based materials. Polyaniline thin films were prepared by employing an rf plasma polymerization technique. Capacitance, dielectric loss, dielectric constant and ac conductivity were evaluated in the frequency range 100 Hz– 1 MHz. Capacitance and dielectric loss decrease with increase of frequency and increase with increase of temperature. This type of behaviour was found to be in good agreement with an existing model. The ac conductivity was calculated from the observed dielectric constant and is explained based on the Austin–Mott model for hopping conduction. These films exhibit low dielectric constant values, which are stable over a wide range of frequencies and are probable candidates for low k applications.

Relevância:

80.00% 80.00%

Publicador:

Resumo:

Presently different audio watermarking methods are available; most of them inclined towards copyright protection and copy protection. This is the key motive for the notion to develop a speaker verification scheme that guar- antees non-repudiation services and the thesis is its outcome. The research presented in this thesis scrutinizes the field of audio water- marking and the outcome is a speaker verification scheme that is proficient in addressing issues allied to non-repudiation to a great extent. This work aimed in developing novel audio watermarking schemes utilizing the fun- damental ideas of Fast-Fourier Transform (FFT) or Fast Walsh-Hadamard Transform (FWHT). The Mel-Frequency Cepstral Coefficients (MFCC) the best parametric representation of the acoustic signals along with few other key acoustic characteristics is employed in crafting of new schemes. The au- dio watermark created is entirely dependent to the acoustic features, hence named as FeatureMark and is crucial in this work. In any watermarking scheme, the quality of the extracted watermark de- pends exclusively on the pre-processing action and in this work framing and windowing techniques are involved. The theme non-repudiation provides immense significance in the audio watermarking schemes proposed in this work. Modification of the signal spectrum is achieved in a variety of ways by selecting appropriate FFT/FWHT coefficients and the watermarking schemes were evaluated for imperceptibility, robustness and capacity char- acteristics. The proposed schemes are unequivocally effective in terms of maintaining the sound quality, retrieving the embedded FeatureMark and in terms of the capacity to hold the mark bits. Robust nature of these marking schemes is achieved with the help of syn- chronization codes such as Barker Code with FFT based FeatureMarking scheme and Walsh Code with FWHT based FeatureMarking scheme. An- other important feature associated with this scheme is the employment of an encryption scheme towards the preparation of its FeatureMark that scrambles the signal features that helps to keep the signal features unreve- laed. A comparative study with the existing watermarking schemes and the ex- periments to evaluate imperceptibility, robustness and capacity tests guar- antee that the proposed schemes can be baselined as efficient audio water- marking schemes. The four new digital audio watermarking algorithms in terms of their performance are remarkable thereby opening more opportu- nities for further research.