Studies on the meteriological aspects of air pollution over Cochin

Pollutants that once enter into the earth’s atmosphere become part of the atmosphere and hence their dispersion, dilution, direction of transportation etc. are governed by the meteorological conditions. The thesis deals with the study of the atmospheric dispersion capacity, wind climatology, atmospheric stability, pollutant distribution by means of a model and the suggestions for a comprehensive planning for the industrially developing city, Cochin. The definition, sources, types and effects of air pollution have been dealt with briefly. The influence of various meteorological parameters such as vector wind, temperature and its vertical structure and atmospheric stability in relation to pollutant dispersal have been studied. The importance of inversions, mixing heights, ventilation coefficients were brought out. The spatial variation of mixing heights studies for the first time on a microscale region, serves to delineate the regions of good and poor dispersal capacity. A study of wind direction fluctuation, σθ and its relation to stability and mixing heights were shown to be much useful. It was shown that there is a necessity to look into the method of σθ computation. The development of Gausssian Plume Model along with the application for multiple sources was presented. The pollutant chosen was sulphur dioxide and industrial sources alone were considered. The percentage frequency of occurrence of inversions and isothermals are found to be low in all months during the year. The spatial variation of mixing heights revealed that a single mixing height cannot be taken as a representative for the whole city have low mixing heights and monsoonal months showed lowest mixing heights. The study of ventilation co-efficients showed values less than the required optimum value 6000m2/5. However, the low values may be due to the consideration of surface wind alone instead of the vertically averaged wind. Relatively more calm conditions and light winds during night and strong winds during day time were observed. During the most of the year westerlies during day time and northeasterlies during night time are the dominant winds. Unstable conditions with high values of σθ during day time and stable conditions with lower values of σθ during night time are the prominent features. Monsoonal months showed neutral stability for most of the time. A study σθ of and Pasquill Stability category has revealed the difficulty in giving a unique value of for each stability category. For the first time regression equations have been developed relating mixing heights and σθ. A closer examination of σθ revealed that half of the range of wind direction fluctuations is to be taken, instead of one by sixth, to compute σθ. The spatial distribution of SO2 showed a more or less uniform distribution with a slight intrusion towards south. Winter months showed low concentrations contrary to the expectations. The variations of the concentration is found to be influenced more by the mixing height and the stack height rather than wind speed. In the densely populated areas the concentration is more than the threshold limit value. However, the values reported appear to be high, because no depletion of the material is assumed through dry or wet depositions and also because of the inclusion of calm conditions with a very light wind speed. A reduction of emission during night time with a consequent rise during day time would bring down the levels of pollution. The probable locations for the new industries could be the extreme southeast parts because the concentration towards the north falls off very quickly resulting low concentrations. In such a case pollutant spread would be towards south and west, thus keeping the city interior relatively free from pollution. A more detailed examination of the pollutant spread by means of models that would take the dry and wet depositions may be necessary. Nevertheless, the present model serves to give the trend of the distribution of pollutant concentration with which one can suggest the optimum locations for the new industries

Studies on The Eco Biology of The Indian Pearl Oyster, Pinctada Fucata (Gould)

The present work aims to study induced maturation of the pearl oyster for induced spawning experiments. The work on larval development was done with a view to developing techniques for the artificial rearing of commercially important pearl oyster P fucata, and also to elucidate the principles and problems of tropical bivalve larvae in general for detailed investigations in the future. The present study is designed to probe into the details of the basic aspects of the biology related to the hatchery technology of Pinctada fucata and the understanding of the factors which influence induction of maturation, spawning, larval rearing and spat settlement. This would go a long way in the upgradation of hatchery technology of the Indian Pearl oyster Pinctada fucata fora commercial level seed production..

Evaluation of Stress Reducing Capacity of Selected Anaesthetics for the Live Transportation of Green Chromide Etroplus suratensis

Transport of live aquatic organisms which is more than a century old, perhaps started in the 1870's (Norris et al, 1960). Live fish transportation is an essential practice in aquaculture particularly in rural areas of developing countries representing the only means of supplying fry to small scale aqua culturists (Taylor and Ross, 1988). Very often, large numbers of fry, fingerlings, juveniles and adult fish are being transported from the hatchery to fish farms, fish farms to market, processors and consumers. Live fish command large economic importance in the fresh fish market than dead and iced fish. Medina Pizzali (2001) observed that live fish in the Kolkata market was usually sold at higher prices than dead fish and most consumers were prepared to pay premium prices for live fish, which is considered as the best guarantee of freshness, quality, and intrinsic characteristics of its flesh (better texture and delicate flavour) in comparison with fresh/chilled seafood. Various government and private agencies undertake transport of live fish for commercial live fish market or for artificial propagation of game

Performance of District Industries Centers in Kerala : An Application of augmented solow Model

This thesis "Entitled performance of district industries centres in kerala :An application of augmented solow model.The first chapter deals with evolution of approaches for promoting small scale production and the growth of small scale industries in india.the developing countries face the problems like sluggish growth capital shortages high levels of unemployment,enoromous rural-urban economic disparities regional inequalities increasing concentration of capital and chronic difficulities in the export sector.Review of literature and methodology of the study are presented in the second chapter. In the third chapter an attempt has been made to make an in-depth study of the emergence and growth of district of district industries centres.In the chapter four an attempt was made to study the organisational structure of DICs functions and responsibilities assigned to the functional managers and performance of the functionaries.

Performance of District Industries Centres in Kerala

This thesis "Entitled performance of district industries centres in kerala :An application of augmented solow model.The first chapter deals with evolution of approaches for promoting small scale production and the growth of small scale industries in india.the developing countries face the problems like sluggish growth capital shortages high levels of unemployment,enoromous rural-urban economic disparities regional inequalities increasing concentration of capital and chronic difficulities in the export sector.Review of literature and methodology of the study are presented in the second chapter. In the third chapter an attempt has been made to make an in-depth study of the emergence and growth of district of district industries centres.In the chapter four an attempt was made to study the organisational structure of DICs functions and responsibilities assigned to the functional managers and performance of the functionaries.

Risk Assessment of Rooftop- Collected Rainwater for Individual Household and Community Use in Central Kerala, India

Water quality of rooftop-collected rainwater is an issue of increased interest particularly in developing countries where the collected water is used as a source of drinking water. Bacteriological and chemical parameters of 25 samples of rooftop-harvested rainwater stored in ferrocement tanks were analyzed in the study described in this article. Except for the pH and lower dissolved oxygen levels, all other physicochemical parameters were within World Health Organization guidelines. Bacteriological results revealed that the rooftop-harvested rainwater stored in tanks does not often meet the bacteriological quality standards prescribed for drinking water. Fifty percent of samples of harvested rainwater for rural and urban community use and 20% of the samples for individual household use showed the presence of E. coli. Fecal coliform/fecal streptococci ratios revealed nonhuman animal sources of fecal pollution. Risk assessment of bacterial isolates from the harvested rainwater showed high resistance to ampicillin, erythromycin, penicillin, and vancomycin. Multiple antibiotic resistance (MAR) indexing of the isolates and elucidation of the resistance patterns revealed that 73% of the isolates exhibited MAR

Emotional Intelligence As A Determinant Of Conflict Style Adoption Of Managers: A Theoretical Perspective

Successful management is dependent heavily on the manager’s ability to handle conflict effectively. The workforce has been increasingly becoming diversified vis-à-vis the gender, culture and ethnicity. The present work environment has in itself contributed to sowing seeds of conflict with greater diversity, hostility, complexity and newer business competencies in the work context.The classic study of Mintzberg’s Managerial roles approach (1973) also says that a manager has to spend sufficient time and energy in solving conflict as he has to take roles as a negotiator, and dispute handler. An understanding of the conflict and role that it plays in influencing employee behavior constructively or destructively is immense. Therefore conflict when left unmanaged can lead to diminished cohesiveness amongst employees, productivity and reduced organizational fitness. To manage conflict effective conflict resolution strategies that have constructive outcomes is called for. Conflict resolution style theorists opine that collaborative or integrative style, where there is high concern for task and people is considered to give positive individual and organizational outcomes, while the withdrawing /avoidance style and forcing / dominating style are considered to be ineffective in managing conflict. Though managers have typical preferences in the styles followed it need not necessarily be the typical response as it depends on the context, power relationships, emotions etc. The adoption of conflict styles of managers however is dependent on variables like gender orientation, cultural values, personality orientation, underlying relationships – public/private. The paper attempts to draw the importance of managing conflicts at workplace positively and the need for effective conflict resolution strategies. The conflict style adopted and the variables that affect the adoption of each style are discussed and possible interventions at the workplace are suggested

Operational Flexibility: A Model for Effective Project Management

The aim of this study is to investigate the role of operational flexibility for effective project management in the construction industry. The specific objectives are to: a) Identify the determinants of operational flexibility potential in construction project management b) Investigate the contribution of each of the determinants to operational flexibility potential in the construction industry c) Investigate on the moderating factors of operational flexibility potential in a construction project environment d) Investigate whether moderated operational flexibility potential mediates the path between predictors and effective construction project management e) Develop and test a conceptual model of achieving operational flexibility for effective project management The purpose of this study is to findout ways to utilize flexibility inorder to manage uncertain project environment and ultimately achieve effective project management. In what configuration these operational flexibility determinants are demanded by construction project environment in order to achieve project success. This research was conducted in three phases, namely: (i) exploratory phase (ii) questionnaire development phase; and (iii) data collection and analysis phase. The study needs firm level analysis and therefore real estate developers who are members of CREDAI, Kerala Chapter were considered. This study provides a framework on the functioning of operational flexibility, offering guidance to researchers and practitioners for discovering means to gain operational flexibility in construction firms. The findings provide an empirical understanding on kinds of resources and capabilities a construction firm must accumulate to respond flexibly to the changing project environment offering practitioners insights into practices that build firms operational flexibility potential. Firms are dealing with complex, continuous changing and uncertain environments due trends of globalization, technical changes and innovations and changes in the customers’ needs and expectations. To cope with the increasingly uncertain and quickly changing environment firms strive for flexibility. To achieve the level of flexibility that adds value to the customers, firms should look to flexibility from a day to day operational perspective. Each dimension of operational flexibility is derived from competences and capabilities. In this thesis only the influence on customer satisfaction and learning exploitation of flexibility dimensions which directly add value in the customers eyes are studied to answer the followingresearch questions: “What is the impact of operational flexibility on customer satisfaction?.” What are the predictors of operational flexibility in construction industry? .These questions can only be answered after answering the questions like “Why do firms need operational flexibility?” and “how can firms achieve operational flexibility?” in the context of the construction industry. The need for construction firms to be flexible, via the effective utilization of organizational resources and capabilities for improved responsiveness, is important because of the increasing rate of changes in the business environment within which they operate. Achieving operational flexibility is also important because it has a significant correlation with a project effectiveness and hence a firm’s turnover. It is essential for academics and practitioners to recognize that the attainment of operational flexibility involves different types namely: (i) Modification (ii) new product development and (iii) demand management requires different configurations of predictors (i.e., resources, capabilities and strategies). Construction firms should consider these relationships and implement appropriate management practices for developing and configuring the right kind of resources, capabilities and strategies towards achieving different operational flexibility types.