Fabrication of Potentiometric Sensors for the Selective Determination of Ketoconazole

The fabrication and analytical applications of two types of potentiometric sensors for the determination of ketoconazole (KET) are described. The sensors are based on the use of KET-molybdophosphoric acid (MPA) ion pair as electroactive material. The fabricated sensors include both polymer membrane and carbon paste electrodes. Both sensors showed a linear, stable and near Nernstian slope of 57.8mV=decade and 55.2mV=decade for PVC membrane and carbon paste sensors respectively over a relatively wide range of KET concentration (1×10-2-5×10-5 and 1×10-2-1×10-6). The sensors showed a fast response time of <30 sec and <45 sec. A useful pH range of 3–6 was obtained for both types of sensors. A detection limit of 2.96 10 5M was obtained for PVC membrane sensor and 6.91 10 6M was obtained for carbon paste sensor. The proposed sensors proved to have a good selectivity for KET with respect to a large number of ions. The proposed sensors were successfully applied for the determination of KET in pharmaceutical formulations. The results obtained are in good agreement with the values obtained by the standard method.

Ferrofluid thin films as optical gaussmeters proposed for field and magnetic moment sensing

Ferrofluids belonging to the series, Ni x Fe1-x Fe2O4 and Zn x Fe1-x Fe2O4, were synthesized using cold co-precipitation. Liquid films of these ferrofluids were prepared by encapsulating the ferrofluids in between two optically smooth and ultrasonically cleaned glass plates. Magnetic field induced laser transmission through these ferrofluid films has been investigated. Magnetic field values can be calibrated in terms of output laser power in the low field region in which the variation is linear. This set up can be used as a cheap optical gaussmeter in the low field regime. Using the same set-up, the saturation magnetization of the sample used can also be calculated with a sample that is pre-characterized. Hence both magnetization of the sample, as well as applied magnetic field can be sensed and calculated with a precalibrated sample.

Resource Sharing Among Engineering College Libraries Affiliated To Mahatma Gandhi University, Kerala: A Proposed Model

There are around 150 engineering colleges (ECs) in Kerala under the government, aided and self financing (S.F.) sectors. While the college libraries in the government and aided sectors receive several grants, the libraries of S.F. colleges are solely run by their own funds. The rising costs of scholarly publications and strict AICTE stipulations regarding libraries and their collection, pose great difficulties to the libraries in all sectors in finding adequate budgets to provide quality services. Library cooperation/resource sharing helps to overcome this problem to a considerable extent. The present study analysed the facilities and services of the ECs affiliated to M.G.University, Kerala to identify whether there is a need for resource sharing (RS) among these libraries. The satisfaction of the users with their library resources and services were also ascertained. The study put forward a model for RS and the opinion of the librarians and users regarding the same were collected. Structured questionnaires were used to collect the required data. The study revealed that a wide gap exist between the libraries with respect to their facilities and services and many of the S.F. libraries have better infrastructure when compared to the government and aided college libraries. Majority of the respondents opined that RS is necessary to satisfy their information needs. The model of RS proposed by the study was widely accepted by the librarians and users. Based on the opinions and suggestions of the respondents, the study developed the potential model for resource sharing- the Virtual Resource Sharing Centre (VRSC).