Studies on the Development and Control of Desiccation cracks in compacted clay liner soils

The present study aimed at critically looking at the current practice of the installation of compacted clay liner using bentonite enhanced sand (BES). The application of bentonite is currently the most accepted practice for lining purposes. The ideal bentonite sand combination, which satisfies the liner requirements is 20% bentonite and 80% sand, was selected as one of the liner materials for the investigation of development of desiccation cracks. Locally available sundried marine clay and its combination with bentonite were also included in the study. The desiccation tests on liner materials were conducted for wet/dry cycles to simulate the seasonal variations. Digital image processing techniques were used to measure the crack intensity factor (CIF), a useful and effective parameter for quantification of desiccation cracking. The repeatability of the tests could be well established, as the variation in CIF values of identical samples had a very narrow range of 0 to 2%. The studies on the development of desiccation cracks showed that the CIF of bentonite enhanced sand mixture (BES) was 18.09%, 39.75% and 21.22% for the first, second and third cycles respectively, while it was only 9.83%, 7.52% and 4.58% respectively for sun dried marine clay (SMC). Thus the locally available, alternate liner material suggested, viz SMC, is far superior to BES, when subjected to alternate wet/dry cycles. Further, the improvement of these liner materials when amended with randomly distributed fibre reinforcements was also investigated. Three types of fibres ,namely nylon fibre, polypropylene monofilament and polypropylene fibre mesh were used for the study of fibre amended BES and SMC.The influence of these amendments on the properties of the above liner materials is also studied. The results showed that there is definite improvement in the properties of the liner materials when it is reinforced with discrete random fibres. The study also proved that the desiccation cracks could be controlled with the help of fibre reinforcement.

Socio economic factors influencing the persistence and control of filariasis in Kerala-A case study of malayan filariasis in Cherthala

In general the behavioural sciences have contributed very little to filariasis research.Man's actions in creating vector breeding sites have been noted and discussed frequently inthe frlariasis literature. but virtually no systematic studies of these fonns of behavior have been undertaken (Dunn. 1979). Human behavioural observations and inquires into values and attitudes atfecting behavior that inhibits or promotes vector breeding are essential if any progress is to be made in developing self help programmes of vector control. Therefore, a systematic study on the socio-economic aspect of the community is warranted before undertaking any control programme against filariasis. In view of this the present study has been carried out which reveals the knowledge, attitude and practice concerning the causation, transmission, treatment and control of the disease. Socio economic factors that influence the creation and maintenance of vector breeding habitats were identified. characterization and ranking of these sociological factors will be helpful in identifying the determinants of human behavioural changes towards the containment of the disease- Information on the existing indigenous perception of the disease and the factors that hinder the control will be useful in developing a sound strategy from the human angle, which can be put to practical use.