Effect of Feeding Rate on Plastic Extrudates

Selected grades of low density polyethylene (LDPE) polystyrene (PS) were extruded in a laboratory extruder by varying the feeding rate at different revolutions per minute and temperatures. The mechanical properties of the extruded plastic sheets were determined. LDPE shows a marked variation in mechanical properties with feeding rate while PS shows a marginal change in mechanical properties with feeding rate. However, for both plastics there is a particular feeding rate in the starved region which results in maximum mechanical properties.

Comparative efficacy of MS-222 and benzocaine as anaesthetics under simulated transport conditions of a tropical ornamental fish Puntius filamentosus(Valenciennes)

There is a growing commercial interest in the ¢sh, Puntius ¢lamentosus, in the ornamental ¢sh trade in India and elsewhere.The trade is, however, hampered by severe mortalities during transport of the ¢sh owing to insu⁄cient data available on the use of anaesthetics. To resolve this problem, we evaluated the e⁄cacy of two anaesthetics, MS-222 and benzocaine, in sedating P. ¢lamentosus in simulated transportation experiments and used stress response parameters such as cortisol and blood glucose levels to perform assessments. We observed that MS-222 at 40 mg L 1 and benzocaine at 20mg L 1 were su⁄- cient to induce sedation for 48 h. Above these concentrations, both the anaesthetics adversely a¡ected the ¢sh and resulted inmortalities. Both anaesthetics signi¢cantly lowered the blood cortisol and glucose levels compared with the unsedated controls. Importantly, the anaesthetics treatment signi¢cantly lowered the post-transport mortality in the ¢sh. The results of the study show that MS-222 and benzocaine could be used as sedatives to alleviate transport- related stress in P. ¢lamentosus to improve their post-transport survival and hence reduce economic loss.

A Triple-Mode Feed-Forward Sigma-Delta Modulator Design For Gsm / Wcdma / Wlan Applications

This paper presents a cascaded 2-2-2 reconfigurable sigma-delta modulator that can handle GSM, WCDMA and WLAN standards. The modulator makes use of a low-distortion swing suppression topology which is highly suitable for wide band applications. In GSM mode, only the first stage (2nd order Σ-Δ ADC) is turned on to achieve 88dB dynamic range with oversampling ratio of 160 for a bandwidth of 200KHz; in WCDMA mode a 2-2 cascaded structure (4th order) is turned on with 1-bit in the first stage and 2-bit in the second stage to achieve 74 dB dynamic range with oversampling ratio of 16 for a bandwidth of 2MHz and a 2-2-2 cascaded MASH architecture with a 4-bit in the last stage to achieve a dynamic range of 58dB for a bandwidth of 20MHz. The novelty lies in the fact that unused blocks of second and third stages can be switched off taking into considerations like power consumption. The modulator is designed in TSMC 0.18um CMOS technology and operates at 1.8 supply voltage.