Present status of coral erosion in Lakshadweep with special reference to Minicoy

Coral Reefs are marine, biogenic, wave resistant carbonate structures, formed of the skeletal remains of hermatypic, or reef building organisms. The main reef builders are calcifying Rhodophytes, molluscs, sponges, polychaetes and Cnidarians. Among them, scleractinian corals and hydrocorallians are by far the most important contributors to the formation of reefs. Coral reefs cover approximately 600 thousand square kilometers of the earth's surface (Crossland fl a_1., 1991) which is about 2x106 square kilometres of tropical oceans.

Mesozooplankton of the Arabian Sea and the Bay of Bengal with special reference to planktonic ostracods

The Arabian Sea and the Bay of Bengal are both highly dynamic ecosystems, due to the seasonally reversing monsoon winds, but the processes affecting the mesozooplankton community remain poorly understood. These are important basins exhibiting enhanced biological production as a result of upwelling, winter cooling and other episodic events such as eddies and gyres. Zooplankters are primarily the prey for almost all fish larvae. Seasonal changes in the biogeochemical processes can strongly affect zooplankton density and distribution, which in turn, strongly affect the larval growth, and consequently, the pelagic fish recruitment. It is clear that plankton biomass and biogeochemical fluxes are not in steady state. Acoustic data on mesozooplankton abundance suggests that they also exist in the mesopelagic zone. Earlier studies were confined only to the upper 200 m and hence the structure of mesozooplankton community in the deeper layers was not well known. Copepods are the dominant mesoplankton group, and therefore the majority of the studies were focused on them. The planktonic ostracods are the second major crustacean group and at times, their swarms can outnumber all other planktonic groups. The understanding of the community structure of the ostracods is essential to establish their role in the marine food web. Mesozooplankton is responsible for the vertical flux of organic matter produced by phytoplankton and is assumed to be equivalent to new production (Eppley & Peterson, 1979). Since the fate of newly produced organic matter depends upon their consumers, the zooplankton biomass must be estimated in size fractions or taxonomic components to understand the vertical flux of organic carbon. It is thus important to update our knowledge on different groups of zooplankton on the basis of seasonal and temporal distribution. The distribution in space and time is essential for modeling the carbon cycling that structure the marine ecosystems

Impact of the Sanitary and Phyto Sanitary Agreement on the Exports of Marine Products from India with Special Reference to Kerala

The present study examines the type of NTMs, especially the quality regulations and safety standards encountered by the marine product exports of Kerala in its major import markets of the EU, the US and Japan. An analysis of whether the safety and quality standards prescribed by these developed countries on the imported fish and fishery products are purely based on risk assessment and scientific evidence or are they erected as disguised barriers to trade is attempted

Studies On Thermoplastic Elastomers With Special Reference To Triblock Copolymers And Nbr/Pvc Blends

Thermoplastic elastomers are a relatively new class of materials which compete with thermoset rubbers in some areas and thermoplastic materials in other areas. The main thrust of the present investigation is a comparative study’ on commercially .available triblock. styrene thermoplastic elastomers and those derived from blends of acrylonitrile-butadiene rubber and poly(vinyl chloride). The styrene—based thermoplastic elastomers are gaining acceptance as a replacement for both natural and synthetic rubber‘ in many‘ applications. TPEs based on blends of elastomers and plastics ix: the fastest growing segment of the broad class of thermoplastic elastomers. Broad applicability and simple technology of production are the attractive features of this class of TPES. NBR/PVC thermoplastic elastomers were selected for this investigation due to the versatility of PVC, its number one position, low cost. ability to Ina compounded into various flexible and rigid form with good physical and chemical and weathering properties etc., which will be passed over to PVC blends especially NBR/PVC blends which are known to form miscible systems

Systematic stratigraphic study of cenozoic sediments of Kerala with Special reference to warkalli and quilon formations

Quaternary stratigraphy of the Kerala coast and the genetic aspects of the sediments are discussed. The age of limeshells, and peaty sediments determined by radio carbon dating have been used for reconstruction of sea level changes. Evolution of red sands occurring in some parts of the coastal tract of Kerala is also discussed, based on textural parameters and quartz grain morphology.

New accelerator system for low temperature curing of elastomers with special reference to NR, NBR and NR/BR blends

The primary objective of this work is to develop an efficient accelerator system for low temperature vulcanization of rubbers. Although xanthates are known to act as accelerators for low temperature vulcanization, a systematic study on the mechanism of vulcanization, the mechanical properties of the vulcanizates at varying temperatures of vulcanization, cure characteristics etc are not reported. Further. xanthate based curing systems are not commonly used because of their chance for premature vulcanization during processing. The proposed study is to develop a novel accelerator system for the low temperature vulcanization of rubbers having enough processing safely. lt is also proposed to develop a method for the prevulcanisation of natural rubber latex at room temperature. As already mentioned the manufacture of rubber products at low temperature will improve its quality and appearance. Also, energy consumption can be reduced by low temperature vulcanization. in addition, low temperature vulcanization will be extremely useful in the area of repair of defective products, since subjecting finished products to high temperatures during the process of repair will adversely affect the quality of the product. Further. room temperature curing accelerator systems will find extensive applications in surface coating industries.

Covulcanization of elastomer blends with special reference to NR/EPDM blends

Attempts have been made to attain satisfactory network structures in each of the phases of a rubber blend by minimising the cure rate imbalance by employing methods such as grafting of accelerators to the slow curing rubber, chemically bonding the crosslinking agents to the rubber in which it has lower solubility, functionalisation of the slow curing rubber, masterbatching of the curing agents to the slow curing rubber etc. Functionalisation of the slow curing constituents of NR/IIR and NR/EIPDM blends is tried using novel reagents as the first part of this study. However, the crux of the present study is a more direct approach to attaining a covulcanized state in NR/IIR and NR/EPDM blends: Precuring the slow curing rubber (IIR or EPDM) to a low level when it can still blend with NR and then to ck) the final curing after blending with NR. TNM3 precuring is also likely to minimise the viscosity mismatch. Since a low level of resmmal crosslink density is likely to be present lJ1 reclaimed rubbers, blending heat resistant reclaimed rubber such as butyl reclaim with NR may also have the same effect of precuring IIR, and then blending with NR. Hence use of IIR reclaim for developing blends with NR is also proposed to be investigated in this study

Ecobiology of helminth parasites of finfishes and shellfishes of Cochin waters with special reference to Digenetic trematodes

The great number of parasitic species of marine and brackishwater animals that have been described indicates that parasites play an important part in the ecology of the oceans and brackishwaters. Jnspite of their importance, marine and brackish parasites are probably the least known group of organisms. Considering the large number of marine and brackishwater hosts, especially in the tropics, it is no exaggeration to say that the description of marine and brackishwater parasites has hardly begun (Rohde, 1982). With this view in mind, an attempt has been made to study the ecobiology of the helminth parasites of finfishes and shellfishes of eochin waters with special reference to digenetic trematodes. The work is broadly divided into three chapters, Chapter 1 consists of a description of the study area, prevalence of infection and concurrent infections with helminth parasites, seasonal variation, host specificity> and zoogeography of digenetic trematodes; Chapter II deals with the systematics of digenetic trematodes; and Chapter III deals with studies on larval trematodes from molluscs and crustacea, adult from a molluscan host, life-cycle, biology and histopathology

Studies On Vulcanization, Rheology And Reinforcement Of Natural Rubber Latex With Special Reference To Accelerator Combinations, Surface Active Agents And Gamma Irradiation

In the present work, studies on vulcanization, rheology and reinforcement of natural rubber latex with special reference to accelerator combinations, surface active agents and gamma irradiation have been undertaken. In vulcanization, the choice of vulcanization system, the extent and mc-zie of vulcanization and network structure of the vulcanizate are important factors contributing to the overall quality of the product. The vulcanization system may be conventional type using elemental sulfur or a system involving sulfur donors. The latter type is used mainly in the manufacture of heat resistant products. For improving the technical properties of the products such as modulus and tensile strength, different accelerator combinations are used. It is known that accelerators have a strong effect on the physical properties of rubber vulcanizates. A perusal of the literature indicates that fundamental studies on the above aspects of latex technology are very limited. Thereforea systematic study on vulcanization, rheology and reinforcement of natural rubber latex with reference to the effect of accelerator combinations, surface active agents and gamma irradiation has been undertaken. The preparation and evaluation of some products like latex thread was also undertaken as a part of the study. The thesis consists of six chapter

Application of ocean colour data to study the oceanographic and atmospheric features off the southwest coast of India with special reference to upwelling

Satellite remote sensing is being effectively used in monitoring the ocean surface and its overlying atmosphere. Technical growth in the field of satellite sensors has made satellite measurement an inevitable part of oceanographic and atmospheric research. Among the ocean observing sensors, ocean colour sensors make use of visible band of electromagnetic spectrum (shorter wavelength). The use of shorter wavelength ensures fine spatial resolution of these parameters to depict oceanographic and atmospheric characteristics of any region having significant spaio-temporal variability. Off the southwest coast of India is such an area showing very significant spatio-temporal oceanographic and atmospheric variability due to the seasonally reversing surface winds and currents. Consequently, the region is enriched with features like upwelling, sinking, eddies, fronts, etc. Among them, upwelling brings nutrient-rich waters from subsurface layers to surface layers. During this process primary production enhances, which is measured in ocean colour sensors as high values of Chl a. Vertical attenuation depth of incident solar radiation (Kd) and Aerosol Optical Depth (AOD) are another two parameters provided by ocean colour sensors. Kd is also susceptible to undergo significant seasonal variability due to the changes in the content of Chl a in the water column. Moreover, Kd is affected by sediment transport in the upper layers as the region experiences land drainage resulting from copious rainfall. The wide range of variability of wind speed and direction may also influence the aerosol source / transport and consequently AOD. The present doctoral thesis concentrates on the utility of Chl a, Kd and AODprovided by satellite ocean colour sensors to understand oceanographic and atmospheric variability off the southwest coast of India. The thesis is divided into six Chapters with further subdivisions

Molecular Approaches For Characterization And Determination Of Pathogenicity Of Vibrios With Special Reference To Vibrio Harveyi From Penaeus Monodon Larval Production Systems

The present study focuses on vibrios especially Vibrio harveyi isolated from shrimp (P. monodon) larval production systems from both east and west coasts during times of mortality. A comprehensive approach has been made to work out their systematics through numerical taxonomy and group them based on RAPD profiling and to segregate the virulent from non- virulent isolates based on the presence of virulent genes as well as their phenotypic expression. The information gathered has helped to develop a simple scheme of identification based on phenotypic characters and segregate the virulent from non virulent strains of V. harveyi.

‘Biochemical Responses to Heavy Metals in Oreochromis mossambicus with special reference to Metal Detoxifying Mechanism

The present work is focused on the organelle and biochemical responses to heavy metal exposure in the fish Oreochromis mossambicus giving particular importance to the metal detoxifying machinery of the organism. The thesis is an outcome of the effort aimed at developing practicable monitoring techniques to deliver guidelines for biological effect monitoring and the need for specific biochemical methods to detect biological effects of heavy metals that can be interpreted in terms of the health status of the individual organism and eventually alterations in vital processes as growth and reproduction. The efficiency of the metal detoxifying metallothioneins which is an attractive tool for biological monitoring, their role as scavengers of trace metal ions and thus in relieving the biological machinery from their toxicity effects are important themes of this study. Efforts have also been made to test the reliability of the spill over hypothesis of the action of metallothioneins (Winge et a1.,1973) and their use as a biological barometer of heavy metal stress.

Some Problems In Algebra And Topology A Study Of Fuzzy Convexity With Special Reference To Separation Properties

This thesis is a study of abstract fuzzy convexity spaces and fuzzy topology fuzzy convexity spaces No attempt seems to have been made to develop a fuzzy convexity theoryin abstract situations. The purpose of this thesis is to introduce fuzzy convexity theory in abstract situations

"Right to Personal Liberty Under the Indian Constitution - With Special Reference to Judicial Process"

The nature and extent of protection secured to personal liberty has been a subject matter of great controversy and debate. The expression "procedure established by law" as a standard of protection for personal liberty has been looked upon as highly unsatisfactory and inadequate. For, unlike the specific attributes of liberty that are separately guaranteed under Art.19, ‘personal liberty‘ as guaranteed by Art.21 does not obligate the .Legislature to comply with the requirements of justice and reasonableness as and when it enchroaches upon that right. Though the concept of ‘personal liberty‘ has received an evolutive and expansive meaning through judicial process, the standard of protection which the judicial process could secure to personal liberty through the interpretation of Art.21 has been far from satisfactory Even after four decades of judicial process in the interpretation of Art.21 the problem of evolving a just and adequate standard of protection for personal liberty in that Article continues to be 21 crucial constitutional issue, craving for a. satisfactory solution. And the present study is a humble attempt to unravel this problem and to Search for a reasonable solution.

Planning And Operation Problems Of Indian Major Ports With Special Emphasis On Cochin Port

Rapid changes in the technological environment of marine logistics and the increasing integration of waterborne, air and land transport systems have fostered a revolution in the design and operations of transport vehicles, cargo handling technology, and terminal facilities. This in turn has caused major changes in the functions of and uses of ports. From literature, it was found that these changes were very slow in case of Indian ports and the performances of port operations were poor when compared with similar ports in the same region. It was also found that a very few studies were conducted to identify the reasons for slow improvements in the performances of Indian major ports. In this thesis, an attempt is made to find out the operational problems of Indian major ports and to analyze the reasons for it. Some solutions have also been found out using management tools