Seoimentology And Geochemistiiy Of Some Selected Mangrove Ecosystems Of Kerala, Southwest Coast Of India

As a result of the issues of care and conservation and sustainable utilisation, the proper management of mangrove forests have become more pressing than ever. Much recent ecological and toxicological debate has been centered around the question of validity of making predictions about the future of mangrove ecosystemas a result of the newly evolved environmental policy. Though muchinformation exist on the biodiversity, floristic composition and characteristics, geographical distribution and uses of mangroves, systematic documentation of the various sedimentological and geochemical phenomena in relation to the mangrove flora are scarce. Hazardous, persistent, man-made chemicals and waste produces are entering the mangrove ecosystem at from the adjacent watersheds which strengthened alarming rates the indispensible need for further researches on the environmental behaviours, fate and the effect of such products. Studies on the effect of heavy metals, pesticides and the other toxic signals through bioassay and toxicity tests on mangrove species as well as in sediments definitely will furnish ample clues to establish the actual operative mechanisms of these environments. A thorough review of literature made in this angle reveals that some attempts have already been initiated the world over the record the physico-chemical characteristics of major abiotic components such as sediments and water of many mangrove ecosystem, however, adequate information is lacking in the Indian Environmental Science scenario. The present investigation is an attempt to record the sedimentological, mineralogical and geochemical characteristics of sediments as well as the heavy metal enrichment in the various species ofmangrove flora of three important mangrove ecosystems of Kerala, located at Veli (SouthKerala), Kochi (Central Kerala) and Kannur (North Kerala). The results of the above investigation have been analysed statistically, discussed based on the available literature and presented in this thesis under seven chapters

Effects Of The Piscicides, Mahua Oil Cake And Croton Seed On The Prawn Culture System

The present research programme envisages a comparative study of the effects of two piscicides of plant origin, viz., mahua oil cake, a derivative from the plant fig Iatifolia and croton seed, a product from the plant Croton tiglium. Although some reports on the effects of mahua oil cake and croton seed on fresh water pond culture systems are available, information on their effect on brackishwater culture systems are rather scanty This was the guiding principle for launching the present study It is hoped that the findings will enable aquaculturists to make use of the piscicides in a more rational and efficient way, and will go a long way towards realising the maximum return liom culture systems without hampering the environment. The thesis is presented in seven chapters such as Introduction, Review of literature, Materials and Methods, Results, Discussion, Summary and Bibliography

Mesozooplankton of the Arabian Sea and the Bay of Bengal with special reference to planktonic ostracods

The Arabian Sea and the Bay of Bengal are both highly dynamic ecosystems, due to the seasonally reversing monsoon winds, but the processes affecting the mesozooplankton community remain poorly understood. These are important basins exhibiting enhanced biological production as a result of upwelling, winter cooling and other episodic events such as eddies and gyres. Zooplankters are primarily the prey for almost all fish larvae. Seasonal changes in the biogeochemical processes can strongly affect zooplankton density and distribution, which in turn, strongly affect the larval growth, and consequently, the pelagic fish recruitment. It is clear that plankton biomass and biogeochemical fluxes are not in steady state. Acoustic data on mesozooplankton abundance suggests that they also exist in the mesopelagic zone. Earlier studies were confined only to the upper 200 m and hence the structure of mesozooplankton community in the deeper layers was not well known. Copepods are the dominant mesoplankton group, and therefore the majority of the studies were focused on them. The planktonic ostracods are the second major crustacean group and at times, their swarms can outnumber all other planktonic groups. The understanding of the community structure of the ostracods is essential to establish their role in the marine food web. Mesozooplankton is responsible for the vertical flux of organic matter produced by phytoplankton and is assumed to be equivalent to new production (Eppley & Peterson, 1979). Since the fate of newly produced organic matter depends upon their consumers, the zooplankton biomass must be estimated in size fractions or taxonomic components to understand the vertical flux of organic carbon. It is thus important to update our knowledge on different groups of zooplankton on the basis of seasonal and temporal distribution. The distribution in space and time is essential for modeling the carbon cycling that structure the marine ecosystems

"Geochemistry and Petrogenesis of Perinthatta Anorthosite, Northern Kera|a

This report deals essentially with the geochemistry and petrogenesis of Perinthatta anorthosite. The work also addresses the geological setting of the pluton in terms of its field relationships and petrography and the structure and metamorphism of the region and examines its relation with the associated plutons. For the sake of convenience, the thesis is divided into six chapters

‘Systematics and pathogenicity of Vibrionaceae associated T ¢ S with the larvae of M. rosenbergii in hatchery

Even though Bergey '5 Manual has been recognized globally as the guide to bacterial systematics, it has to be emphasized that descriptions given to a large extent are based on studies made with temperate isolates This leads one to conclude that any attempt to identify the tropical isolates with identification keys and tables generated from this information may lead to erroneous conclusions. And there is every possibility of the existence of genotypic and phenotypic variants or even nev. species in this part ofthe aquatic ecosystem. Applications ofa polythetic scheme of classification based on the principles of Numerical Taxonomy opens up exciting avenues for bringing to light, this possibility which otherwise would have been masked by the unidirectional approach as in monothetic schemes. Another added advantage of clustering a ‘natural’ bacterial population by numerical taxonomy, is the ease by which genotypic characterization could be performed on the clusters by selecting a representative from each cluster This helps overcome the practical impossibility of analyzing all the isolates in a pani:'_lar cluster. The genotypic characteizarion would either be mole °/o G-'rC. DNA-D.\_-X hybridization, DNA-RNA hybridization or DNA fingerprinting. Considering the requirement creating a broad base in the understanding of the family Vibrionaceae associated with the larvae ofM rosenbergii, the present work was undertaken to channelize every new information generated for developing appropriate managerial measures to protect the larvae from vibriosis during the unusually prolonged larval phase.

Prospects of sprayed CZTS thin film solar cells from the perspective of material characterization and device performance

This thesis is devoted to the development of a relatively new, rapidly developing quaternary semiconducting material (viz., Cu2ZnSnS4) used for photovoltaic applications. This semiconductor, commonly known as CZTS, is closely related to a family of materials that have been used for solar cell applications. It is a compound semiconductor made of copper, zinc, tin and sulfur, which are sufficiently abundant elements; none of them is harmful to the environment even at large scale usage. Aim of this study is to fabricate CZTS solar cells through chemical spray pyrolysis (CSP) technique. At first the influence of various spray parameters like substrate temperature, spray rate, precursor ratio etc. on the opto-electronic properties of CZTS films will be studied in detail. Then the fabrication of CZTS/In2S3 hetero junctions and various ways to improve the performance parameters will be tried

Structural, electrical and electrochemical characterization of high frequency magnetron sputtered spinel oxide cathode films for lithium ion battery applications

The main challenges in the deposition of cathode materials in thin film form are the reproduction of stoichiometry close to the bulk material and attaining higher rates of deposition and excellent crystallinity at comparatively lower annealing temperatures. There are several methods available to develop stoichiometric thin film cathode materials including pulsed laser deposition; plasma enhanced chemical vapor deposition, electron beam evaporation, electrostatic spray deposition and RF magnetron sputtering. Among them the most versatile method is the sputtering technique, owing to its suitability for micro-fabricating the thin film batteries directly on chips in any shape or size, and on flexible substrates, with good capacity and cycle life. The main drawback of the conventional sputtering technique using RF frequency of 13.56MHz is its lower rate of deposition, compared to other deposition techniques A typical cathode layer for a thin film battery requires a thickness around one micron. To deposit such thick layers using convention RF sputtering, longer time of deposition is required, since the deposition rate is very low, which is typically 10-20 Å/min. This makes the conventional RF sputtering technique a less viable option for mass production in an economical way. There exists a host of theoretical and experimental evidences and results that higher excitation frequency can be efficiently used to deposit good quality films at higher deposition rates with glow discharge plasma. The effect of frequencies higher than the conventional one (13.56MHz) on the RF magnetron sputtering process has not been subjected to detailed investigations. Attempts have been made in the present work, to sputter deposit spinel oxide cathode films, using high frequency RF excitation source. Most importantly, the major challenge faced by the thin film battery based on the LiMn2O4 cathode material is the poor capacity retention during charge discharge cycling. The major causes for the capacity fading reported in LiMn2O4cathode materials are due to, Jahn-Teller distortion, Mn2+ dissolution into the electrolyte and oxygen loss in cathode material during cycling. The work discussed in this thesis is an attempt on overcoming the above said challenges and developing a high capacity thin film cathode material.

Synthesis And Reactions Of Pyrazoldouinoxalines

The present work reports the synthesis of 2-ary1—3—oxo-3—pyrazolino[3,4-b]quinoxalines for the first time. These compounds have been prepared by the reaction of ethyl 2-chloroquinoxaline—3—carboxylate with different phenylhydrazines. 2-Aryl—3-oxo—3—pyrazolino[3,4—b]quinoxalines are generally light yellow in either neutral or acid solutions but changed the colour to deep violet or green in basic media. The change in colour appears to be sharp and therefore these compounds may be used as acid base indicators. Their UV absorption maxima under acidic and basic media are also very different. However, the actual conditions under which these compounds may be used as indicators have not been worked out. The synthesis and reactions of a new heterocyclic system, lH—l,5—benzodiazepino[2,3—b]quinoxaline is also reported here. This novel nitrogen heterocycke was prepared by the condensation of ethyl 2-chloroquinoxaline-3—carboxylate with o-phenylene diamine and subsequent manipulationsa to give the parent compound. Several derivatives which are expected tx> have valuable biological properties have also beenlreported. The structures of all new compounds have been established by elemental analysis and also by analysing their spectral data smch as ultraviolet, infrared, nuclear magnetic resonance and mass spectrometry. Compounds obtained from this work will be submitted for screening their biological properties.

NIR Spectroscopic and Laser Induced Fluorescence studies of some organic molecules

Vibrational overtone spectroscopy of molecules containing X-H oscillators (X = C, N, O...) has become an effective tool for the study of molecular structure, dynamics, inter and intramolecular interactions, conformational aspects and substituent effects in aliphatic and aromatic compounds. In the present work, the author studied the NIR overtone spectra of some liquid phase organic compounds. The analysis of the CH, NH and OH overtones yielded important structural information about these systems. In an attempt to get information on electronic energy levels, we studied the pulsed Nd:YAG laser induced fluorescence spectra of certain organic compounds. The pulsed laser Raman spectra of some organic compounds are also studied. The novel high resolution technique of near infrared tunable diode laser absorption spectroscopy (TDLAS) is used to record the rotational structure of the second OH overtone spectrum of 2-propanol. The spectral features corresponding to the different molecular conformations could be identified from the high resolution spectrum. The whole work described in this thesis is divided into five chapters.

Development of a Biometric Personal Authentication System Based on Fingerprint and Speech

Biometrics deals with the physiological and behavioral characteristics of an individual to establish identity. Fingerprint based authentication is the most advanced biometric authentication technology. The minutiae based fingerprint identification method offer reasonable identification rate. The feature minutiae map consists of about 70-100 minutia points and matching accuracy is dropping down while the size of database is growing up. Hence it is inevitable to make the size of the fingerprint feature code to be as smaller as possible so that identification may be much easier. In this research, a novel global singularity based fingerprint representation is proposed. Fingerprint baseline, which is the line between distal and intermediate phalangeal joint line in the fingerprint, is taken as the reference line. A polygon is formed with the singularities and the fingerprint baseline. The feature vectors are the polygonal angle, sides, area, type and the ridge counts in between the singularities. 100% recognition rate is achieved in this method. The method is compared with the conventional minutiae based recognition method in terms of computation time, receiver operator characteristics (ROC) and the feature vector length. Speech is a behavioural biometric modality and can be used for identification of a speaker. In this work, MFCC of text dependant speeches are computed and clustered using k-means algorithm. A backpropagation based Artificial Neural Network is trained to identify the clustered speech code. The performance of the neural network classifier is compared with the VQ based Euclidean minimum classifier. Biometric systems that use a single modality are usually affected by problems like noisy sensor data, non-universality and/or lack of distinctiveness of the biometric trait, unacceptable error rates, and spoof attacks. Multifinger feature level fusion based fingerprint recognition is developed and the performances are measured in terms of the ROC curve. Score level fusion of fingerprint and speech based recognition system is done and 100% accuracy is achieved for a considerable range of matching threshold

Blue, Green and Orange-Red Light Emitting Polymers: Synthesis, Characterization and Prospects of Applications in Optoelectronic Devices

Light emitting polymers (LEPs) are considered as the second generation of conducting polymers. A Prototype LEP device based on electroluminescence emission of poly(p-phenylenevinylene) (PPV) was first assembled in 1990. LEPs have progressed tremendously over the past 20 years. The development of new LEP derivatives are important because polymer light emitting diodes (PLEDs) can be used for the manufacture of next-generation displays and other optoelectronic applications such as lasers, photovoltaic cells and sensors. Under this circumstance, it is important to understand thermal, structural, morphological, electrochemical and photophysical characteristics of luminescent polymers. In this thesis the author synthesizes a series of light emitting polymers that can emit three primary colors (RGB) with high efficiency

Culture and growth kinetics of selected nanoplankters

The present study on naoplankton is based on the isolation and development of unialgai culturas from the inshore waters at Cochin. characterization of their growth assimilation products. ecophysioiogy and evaluation of nutritional quality. The work was carried out during the period 1980-1983. The nanoplankters were isolated and grown in the labratory as batch cultures to study the increase in cell population, the photosynthetic pigment: ana physioiogical activity. The chemical composition of these organisms and their rate of excretion were also determined. The environmental factors physical and chemical that influence the growth of these Cultures were defined by conducting independentexperiments. These cultures of the isolated nanoplankters have raised indoor and fed to the larvae of edible oyster to test their suitability as live-food.

Environomics - A Financial Estimate of Environmental Pollution Control and Abatement Schemes in Eloor-Edayar Industrial Belt

The present study consists of nine chapters including the introductory chapter. Chapter II makes a brief review of environmental literature and examines various measures adopted at the global level to protect the environment. The environmental problems often transgress national sovereignity and geographical boundaries. Therefore, attempts must be made at the national and international levels to protect the environment, the resources of which are the common property of mankind. The protection of the national environment from the ancient till the present forms the content of Chapter III. These chapters together provide a background to understand the issues analysed in the subsequent chapters. Carefully worked out theoretical framework is a pre-requisite for the successful study of a complex subject. Some of the theoretical issues of ‘environomics’ are examined in Chapter IV. The theoretical issues involved in estimating the costs and benefits of environmental protection constitute the theme of Chapter V. The state of environment in Eloor-Edayar Industrial belt andthe impact analysis of pollution of the area are discussed in Chapter VI and VII respectively. Chapter VIII makes the financial estimate of environmental protection of the project And finally, Chapter IX presents the findings of the study