District Level Planning In Kerala And Karnataka - A Comparative Study

When we consider Kerala and Karnataka States according to their levels of decentralisation. Kerala is at the beginning of the scale of decentralisation whereas Kamataka has moved far ahead along this scale. Therefore I in order to conduct a comparative study of the SUbject under analysis t Kamataka has been selected owing to the fact that it is in an advanced stage in the experience of district planning compared to Kerala , Karnataka could successfully implement district planning and it is me of the pioneering states in this regard. But Kerala has not gained much experience in the field of decentralised district planning till now. Furthermore Kerala and Kamataka states are selected for the present study due to operational reasons I besides the author I s familiarity with the socia-economic conditions of these states. Thus. an analysis of the district planning experience of Kamataka will provide constructive and valuable information. which will be of great importance to Kerala State, which is now aspiring to introduce ful.I-f'Iedge district planning by constituting elected District Coancils in every district of Kerala. Moreover. the findings and policy implications of the present study will be of immense help to planners, politicians. administrators, academicians and people at large.

A Comparative Study Of The Organisation And Management Of Notihed Markets In Bangladesh With The Organisation And Management Of Regulated Markets In West Bengal India

For improving agricultural marketing, which has been discussed in the previous chapter, the Government has intervened in different ways. The direct regulatory role through the regulation of markets and market practices is one of the ways in which governmental intervention can improve agricultural marketing. This study is an enquiry of the direct regulatory role of the government through regulation of markets and market practices. By restructuring the operational methods and redesigning the existing physical markets, this system gives direct benefit to the cultivating class and protects them from the market manipulations of organised and powerful private traders. If traders do not continue their trade for the time being they will not be affected financially, because they are resourceful or financially solvent. On the other hand, Cultivators must sell their produce immediately after harvesting for the lack of additional facilities or to satisfy other needs for which finance is required. Another important reason is that Cultivators/farmers are not organised and because of lack of their organisation, they sell their produces individually. In this situation, a farmer is helpless when astute traders indulge in manipulations at the time of purchase of the produces. So it is the government's obligation to protect the interest of the farmers. Protection of the farmer/cultivator is necessary not only from the point of social justice but also from that of economic growth. If the farmers are assured of a remunerative or incentive price for their produce, they will get the inspiration to produce more and through more production, economy will be developed and the nation as a whole will be benefitted. This study will examine the management system of the markets through the direct regulatory role played by the governments to control markets and market practices in West Bengal and Bangladesh.

Studies on the catalysis by sulfated mixed oxides of tin with some rare earth elements

A comparative study of acid-base properties and catalytic activity of Sn-La and Sn-Sm mixed oxides and their corresponding sulfate modified analogues are reported in this thesis. The catalytic activity and product selectivity in the decomposition of alcohols are correlated with the acid-base and redox properties of the catalyst systems under study The effect of catalyst preparation, pretreatment and various reaction parameters on the catalytic activity of sulfate modified oxides is investigated in the oxidative dehydrogenation reactions The experimental conditions are optimised to synthesise industrially important organic chemicals viz. 2,6 xylenol, o-cresol, N-methylanilne and N,N-dimethylaniline employing the mixed oxide systems. The effect of sulfate treatment on the catalytic activity of these systems in the alkylation reactions of phenol, anisole and aniline is also investigated and the merits and demerits of sulfate treatment are highlighted.

Private and Co-operative Granite Quarries in Thrissur District - A Comparative Study

The study is confined to non-mechanised private and cooperative granite quarries in Thrissur district. There are 90 non -mechanised quarries in Thrissur district. Data were collected for the period from 1994-'95 to 1999-2000. 315* March of every year was considered as the closing date of the year. It envisages an analysis of various problems connected with quarrying operations, financial analysis, cost analysis, demand and supply position of quarry products and socio-economic background of workers. It also suggest some measures to improve the working conditions of granite quarrying.

Hydrogeological, Geophysical And Geochemical Studies In Parts Of Coastal And Midland Areas, Central Kerala - A Gis Approach

The present study deals with the different hydrogeological characteristics of the coastal region of central Kerala and a comparative analysis with corresponding hard rock terrain. The coastal regions lie in areas where the aquifer systems discharge groundwater ultimately into the sea. Groundwater development in such regions will require a precise understanding of the complex mechanism of the saline and fresh water relationship, so that the withdrawals are so regulated as to avoid situations leading to upcoming of the saline groundwater bodies as also to prevent migration of sea water ingress further inland. Coastal tracts of Kerala are formed by several drainage systems. Thick pile of semi-consolidated and consolidated sediments from Tertiary to Recent age underlies it. These sediments comprise phreatic and confined aquifer systems. The corresponding hard rock terrain is encountered with laterites and underlined by the Precambrian metamorphic rocks. Supply of water from hard rock terrain is rather limited. This may be due to the small pore size, low degree of interconnectivity and low extent of weathering of the country rocks. The groundwater storage is mostly controlled by the thickness and hydrological properties of the weathered zone and the aquifer geometry. The over exploitation of groundwater, beyond the ‘safe yield’ limit, cause undesirable effects like continuous reduction in groundwater levels, reduction in river flows, reduction in wetland surface, degradation of groundwater quality and many other environmental problems like drought, famine etc.

Studies On Thermoplastic Elastomers With Special Reference To Triblock Copolymers And Nbr/Pvc Blends

Thermoplastic elastomers are a relatively new class of materials which compete with thermoset rubbers in some areas and thermoplastic materials in other areas. The main thrust of the present investigation is a comparative study’ on commercially .available triblock. styrene thermoplastic elastomers and those derived from blends of acrylonitrile-butadiene rubber and poly(vinyl chloride). The styrene—based thermoplastic elastomers are gaining acceptance as a replacement for both natural and synthetic rubber‘ in many‘ applications. TPEs based on blends of elastomers and plastics ix: the fastest growing segment of the broad class of thermoplastic elastomers. Broad applicability and simple technology of production are the attractive features of this class of TPES. NBR/PVC thermoplastic elastomers were selected for this investigation due to the versatility of PVC, its number one position, low cost. ability to Ina compounded into various flexible and rigid form with good physical and chemical and weathering properties etc., which will be passed over to PVC blends especially NBR/PVC blends which are known to form miscible systems

A Study Of The Textile Industry In Kerala With Comparative Reference To Tamil Nadu

. The cotton mill industry is one of the important medium and large-scale industries in the State of Kerala. Due to the widespread development of the handloom industry in the State, there is an environment conducive to the growth of cotton spinning mills which produce yarn, the raw material required by the handloom industry. New spin— ing mills are being commissioned. But the performance of the existing cotton spinning and weaving mills in the State is not quite satisfactory. Hence an analysis has been carried out into the profitability and financial position of the industry in Kerala. The objective of the study is to make a financial analysis of the industry covering various aspects such as cost structure, productivity, asset structure, financial structure and working capital management.

A Comparative Study Of Tensile And Microstructural Characteristics Of Friction Welded Joints And Conventionally Welded Joints Of Aluminium Alloy 6061

Welding of high strength and low weight materials like Aluminium Alloys without any defects by conventional welding techniques is a major challenge in industries. Hence research on solid state welding techniques like Friction stir welding and Friction welding techniques have got much importance in joining of Aluminium alloys. However most of the industries are not changing conventional techniques as skilled workers are available on that area. Most common conventional welding techniques used for joining of Aluminium alloys are Gas welding and Arc welding. Friction welding is a solid-state welding process that generates heat through mechanical friction between a moving and a stationary component with the addition of a lateral force called “upset” to plast ically displace and fuse the materials. In this work, experimental study on tensile and micro structural characteristics of welded joints formed from conventional welding techniques and Rotary friction welding(suitable for weld specimens with circular cross section) has been carried out and the same were compared. The process parameters for arc welding used was 50-70 Amp reverse polarity DC and electrodes of 2.3mm diameter. In Gas welding, the parameters were oxy acetylene neural flame at 3200°C and 3mm electrodes . In the case of friction welding an axial pressure loading of 3Mpa with 5 MPa as upsetting pressure and 500 rpm were used to obtain good welded joints. Tensile characteristic studies of Arc welded joints and Gas welded joints showed 48% and 60 % variations respectively from the maximum load bearing characteristics of parent metal. In the case of friction welded joint, the variation was found to 46%. Micro structural evaluation of conventionally welded joints exhibited clear distinct zones of various weld regions. In the case of friction welded joint micro structural photographs showed comparable features both in parent metal and welded region. Thus the tensile characteristic study and microstructure evaluations proved that friction welded joints are good in both aspects compared to conventionally welded joints.