Investigative links between cognitive function and moderate-to-vigorous physical activity in elementary physical education

Research has noted both physical and psychosocial benefits when children participate in regular physical activity. Recent studies are indicating that there may also be academic benefits and that students may be more efficient learners with participation in physical activity. This study investigated the influence of acute moderate-to-vigorous physical activity on four cognitive functions: planning, attention, simultaneous processing, and successive processing. Three classes (59 students) were each tested twice using a balanced design (intervention, balance, and control groups). It was found that the intervention group had a large increase in planning abiHty (ES = 1.67) when compared to the balance (ES = .80) and control (ES = -.89) groups. On the three remaining cognitive functions, the intervention group showed effect sizes similar to that of the balance and control groups. These results indicate that improved planning after physical activity may playa role in improving student performance.

Investigations into the extraction and the determination of polycyclic aromatic hydrocarbons (PAHs) from water by solid-phase extraction and capillary gas chromatography/ mass spectrometry

Factors affecting the detennination of PAHs by capillary GC/MS were studied. The effect of the initial column temperature and the injection solvent on the peak areas and heights of sixteen PAHs, considered as priority pollutants, USillg crosslinked methyl silicone (DB!) and 5% diphenyl, 94% dimethyl, 1% vinyl polysiloxane (DBS) columns was examined. The possibility of using high boiling point alcohols especially butanol, pentanol, cyclopentanol, and hexanol as injection solvents was investigated. Studies were carried out to optimize the initial column temperature for each of the alcohols. It was found that the optimum initial column temperature is dependent on the solvent employed. The peak areas and heights of the PAHs are enhanced when the initial column temperature is 10-20 c above the boiling point of the solvent using DB5 column, and the same or 10 C above the boiling point of the solvent using DB1 column. Comparing the peak signals of the PAHs using the alcohols, p-xylene, n-octane, and nonane as injection solvents, hexanol gave the greatest peak areas and heights of the PAHs particularly the late-eluted peaks. The detection limits were at low pg levels, ranging from 6.0 pg for fluorene t9 83.6 pg for benzo(a)pyrene. The effect of the initial column temperature on the peak shape and the separation efficiency of the PARs was also studied using DB1 and DB5 columns. Fronting or splitting of the peaks was obseIVed at very low initial column temperature. When high initial column temperature was used, tailing of the peaks appeared. Great difference between DB! and.DB5 columns in the range of the initial column temperature in which symmetrical.peaks of PAHs can be obtained is observed. Wider ranges were shown using DB5 column. Resolution of the closely-eluted PAHs was also affected by the initial column temperature depending on the stationary phase employed. In the case of DB5, only the earlyeluted PAHs were affected; whereas, with DB1, all PAHs were affected. An analytical procedure utilizing solid phase extraction with bonded phase silica (C8) cartridges combined with GC/MS was developed to analyze PAHs in water as an alternative method to those based on the extraction with organic solvent. This simple procedure involved passing a 50 ml of spiked water sample through C8 bonded phase silica cartridges at 10 ml/min, dried by passing a gentle flow of nitrogen at 20 ml/min for 30 sec, and eluting the trapped PAHs with 500 Jll of p-xylene at 0.3 ml/min. The recoveries of PAHs were greater than 80%, with less than 10% relative standard deviations of nine determinations. No major contaminants were present that could interfere with the recognition of PAHs. It was also found that these bonded phase silica cartridges can be re-used for the extraction of PAHs from water.

Strategies for economic development in the Commonwealth Caribbean: a comparative study of the foreign economic policy strategies adopted by the Manley government in Jamaica and the Williams government in Trinidad and Tobago

This thesis compares the foreign economic poUcy dimension of the development strategies adopted by the governments of two Commonwealth caribbean countries: The Hardey government In Jamaica, and the· Williams government in Trlnidad and T ooago, The foreign economic policIes adopted by these governments appeared, on the surface~ to be markedly dissimilar. The Jamakan strategv on the one hand, emphasised self-reliance and national autonomy; and featured the espousal of radical oonaHgnment together with attempts to re-deftne the terms of the Islands externaa economIc relaUoos. The Trinidadian strategy 00 the other hand, featured Uberal externaUy-oriented growth poUctes, and close relatjoos with Western governments and financial institutions. Th1s study attempts to identify the explanatory factors that account for the apparent dlssimUarUy 1n the foreign economic policies of these two govemnents. The study is based on a comparison of how the structural bases of an underdeveloped ecooomYg and the foreign penetration and vulnerabUUy to external pressures asSOCiated wUh dependence, shape and influence foreign economic poUcy strategy. The framework views fore1gn ecooom1c strategy as an adaptive response on the part of the decision makers of a state to the coostralnts and opportunities provided by a particular situation. The · situat i 00' in this case being the events, conditions, structures and processes, associated wUh dependente and underdevelopment. The results indicate that the similarities and dissimHarities in the foreign economic policies of the governments of Jamaica and Trinidad were a reflecUon of the simHarities and dissimilarities in their respective situations. The conclusion derived suggests that If the foreign pol1cy field as an arena of choice, Is indeed one of opportunities and constraints for each and every state, then poHcy makers of smaU, weak, hlghW penetrated and vulnerable states enter thlS arena with constraints outweighing opportunities. This places effective limits 00 their decisional latitude and the range of policy options avaUable. Policy makers thus have to decide critical issues with few estabUshed precedents, in the face of domestic social and political cleavages, as wen as serious foreign pressures. This is a reflection not only of the trappings of dependence, but also of the Umned capabilities arising from the sman size of the state, and the Impact of the resource-gap In an underdeveloped economy. The Trinidadian strategy 1s UlustraUve of a development strategy made viable through a combination of a fortuitous circumstance, a confluence of the interests of influential groups» and accurate perception on the part of poUcy makers. These factors enabled policy makers to minimise some of the constraints of dependence. The faUure of Manlets strategy on the other hand, 15 iHustraUve of the problems involved tn the adoption of poUcles that work against the interest of internal and external political and economic forces. It is also tUustraUve of the consequences of the faUure 00 the part of policy makers to clarify goals, and to reconcile the values of rapid economic growth with increased self-reliance and national autonomy. These values tend to be mutuany Incompatible given the existing patterns of relations in the jnternational economy.

Investigations into the determination of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) by capillary gas chromatography

Factors involved in the determination of PAHs (16 priority PAHs as an example) and PCBs (10 PCB congeners, representing 10 isomeric groups) by capillary gas chromatography coupled with mass spectrometry (GC/MS, for PAHs) and electron capture detection (GC/ECD , for PCBs) were studied, with emphasis on the effect of solvent. Having various volatilities and different polarities, solvent studied included dichloromethane, acetonitrile, hexan e, cyclohexane, isooctane, octane, nonane, dodecane, benzene, toluene, p-xylene, o-xylene, and mesitylene. Temperatures of the capillary column, the injection port, the GC/MS interface, the flow rates of carrier gas and make-up gas, and the injection volume were optimized by one factor at a time method or simplex optimization method. Under the optimized conditions, both peak height and peak area of 16 PAHs, especially the late-eluting PAHs, were significantly enhanced (1 to 500 times) by using relatively higher boiling point solvents such as p-xylene and nonane, compared with commonly used solvents like benzene and isooctane. With the improved sensitivity, detection limits of between 4.4 pg for naphthalene and 30.8 pg for benzo[g,h,i]perylene were obtained when p-xylene was used as an injection solvent. Effect of solvent on peak shape and peak intensity were found to be greatly dependent on temperature parameters, especially the initial temperature of the capillary column. The relationship between initial temperature and shape of peaks from 16 PAHs and 10 PCBs were studied and compared when toluene, p-xylene, isooctane, and nonane were used as injection solvents. If a too low initial temperature was used, fronting or split of peaks was observed. On the other hand, peak tailing occurred at a too high initial column temperature. The optimum initial temperature, at which both peak fronting and tailing were avoided and symmetrical peaks were obtained, depended on both solvents and the stationary phase of the column used. On a methyl silicone column, the alkane solvents provided wider optimum ranges of initial temperature than aromatic solvents did, for achieving well-shaped symmetrical GC peaks. On a 5% diphenyl: 1% vinyl: 94% dimethyl polysiloxane column, when the aromatic solvents were used, the optimum initial temperature ranges for solutes to form symmetrical peaks were improved to a similar degree as those when the alkanes were used as injection solvents. A mechanism, based on the properties of and possible interactions among the analyte, the injection solvent, and the stationary phase of the capillary column, was proposed to explain these observations. The effect of initial temperature on peak height and peak area of the 16 PAHs and the 10 PCBs was also studied. The optimum initial temperature was found to be dependent on the physical properties of the solvent used and the amount of the solvent injected. Generally, from the boiling point of the solvent to 10 0C above its boiling point was an optimum range of initial temperature at which cthe highest peak height and peak area were obtained.

Investigating the association between motor proficiency and body satisfaction in grade 5 children

The inverse relationships between motor proficiency and overweight, and between overweight and body satisfaction have been well documented. However, the association between motor proficiency and body satisfaction has been largely neglected in the literature. Knowledge of the influence that low motor proficiency may have on body satisfaction is essential if the full burden that those children with poor motor abilities face is to be fully recognized, as low body satisfaction has been linked to an increased risk for low self-esteem, depression, and disordered eating. The cohort investigated in this report included 1907 (971 males, 936 female) Grade 5 students from the Physical Health Activity Study Team (PHAST) project in the Niagara Region of Southern Ontario. Children were grouped as overweight or healthy weight (using BMI cut offs for age and gender), and as low motor proficiency or normal motor proficiency (cut-off set at lowest 10% Bruininks Oseretsky Test of Motor Proficiency-short form (BOTMPsf). It was apparent from analyses of variance (ANOVAs) by gender that boys demonstrated significantly higher motor proficiency scores. As a result separate multiple logistic regressions by gender were used to determine the relationship between body satisfaction, BMI, and motor proficiency. There was a significant relationship between BMI and body satisfaction for both genders (p<0.01) and for males a significant relationship between motor proficiency and body satisfaction (p<0.03). Overweight females were less likely to be satisfied with their bodies with an odds ratio (OR) of 0.33 (CI: 0.23-0.47). The same trend was found in overweight males (OR: 0.42, CI: 0.29-0.59). Males with low motor proficiency were significantly less satisfied with their bodies (OR: 0.53, CI: 0.29-0.97). Males with poor motor proficiency were at greater risk for low body satisfaction regardless of their overweight status. Overweight is known to be prevalent among children with low motor proficiency and, these results indicate that low body satisfaction is also a significant concern. These findings confirm that attention needs to be paid to perceptions of body satisfaction among children with low motor proficiency. This is particularly true for boys, as their bodies may fail them in two common societal expectations, shape and skill and for whom their risk of low body satisfaction is heightened by their poor motor proficiency.

University Faculty Members’ Understanding of Their Role: Identity, Power, and Silence

This qualitative study was conducted to explore tenured faculty members’ understandings of their roles as professors. Tenure is an institutional means to enact academic freedom, which allows tenured faculty members to investigate topics of their choosing free from external influence. Academic freedom also enables faculty members to be public intellectuals who shape and critique social policies and make knowledge assertions. In effect, the faculty members are institutionally protected to speak truth to power. Purposeful sampling of 9 participants from 2 universities yielded 3 major themes: professorial identity (shaped by such factors as career stage, university culture, and faculty affiliation), professorial power (powers that participants experienced as well as the ways in which they exercised power), and professorial silencing (as a response to fiscal realities coupled with numerous governance issues). While participants were cognizant of the powers that affected their freedoms, they were less aware of the ways in which their position afforded them powers. Subtle but more potent forms of power were at play for tenured professors, but the participants saw themselves as having to work within institutional and financial constraints that limited their freedom to speak out on controversial issues. Faculty members were, thus, silenced and at times chose to self-silence. The context of the present-day university, governance models, and the financial issues affecting universities and departments worked in concert to silence this critical voice in society.

Mirroring Enzymes: The Role of H-Bonding In HQuin-BAM Catalyzed Asymmetric Aza-Henry Reactions: A DFT Study into the Reactivity, Mechanism, and Origins of Selectivity

The exact mechanistic understanding of various organocatalytic systems in asymmetric reactions such as Henry and aza-Henry transformations is important for developing and designing new synthetic organocatalysts. The focus of this dissertation will be on the use of density functional theory (DFT) for studying the asymmetric aza-Henry reaction. The first part of the thesis is a detailed mechanistic investigation of a poorly understood chiral bis(amidine) (BAM) Brønsted acid catalyzed aza-Henry reaction between nitromethane and N-Boc phenylaldimine. The catalyst, in addition to acting as a Brønsted base, serves to simultaneously activate both the electrophile and the nucleophile through dual H-bonding during C-C bond formation and is thus essential for both reaction rate and selectivity. Analysis of the H-bonding interactions revealed that there was a strong preference for the formation of a homonuclear positive charge-assisted H-bond, which in turn governed the relative orientation of substrate binding. Attracted by this well-defined mechanistic investigation, the other important aspect of my PhD research addressed a detailed theoretical analysis accounting for the observed selectivity in diastereoselective versions of this reaction. A detailed inspection of the stereodetermining C-C bond forming transition states for monoalkylated nitronate addition to a range of electronically different aldimines, revealed that the origins of stereoselectivity were controlled by a delicate balance of different factors such as steric, orbital interactions, and the extent of distortion in the catalyst and substrates. The structural analysis of different substituted transition states established an interesting dependency on matching the shape and size of the catalyst (host molecule) and substrates (guest molecules) upon binding, both being key factors governing selectivity, in essence, offering an analogy to positive cooperative binding effect of catalytic enzymes and substrates in Nature. In addition, both intra-molecular (intra-host) and inter-molecular (host-guest, guest-guest) stabilizing interactions play a key role to the high π-facial selectivity. The application of dispersion-corrected functionals (i.e., ωB97X-D and B3LYP-D3) was essential for accurately modeling these stabilizing interactions, indicating the importance of dispersion effects in enantioselectivity. As a brief prelude to more extensive future studies, the influence of a triflate counterion on both reactivity and selectivity in this reaction was also addressed.