Some ecological effects of beaver upon the watersheds in the Porcupine Hills, Alberta /

This ecological investigation of the beaver (Castor canadensis canadensis Kuhl) was part of the Eastern Slopes (Alberta) Watershed Research program conducted during the summers of 1968 . 1969 . 1970. and 1971 . A soil particle size analysis indicated that soil heavy with clay was used by the beaver for construction purposes in the Porcupine Hills . Examples were given of the beaver controlling erosion with the construction of dams . and also causing erosion to occur . However . in general . the beaver slow down soil erosion and decrease the loss of soil from this region. The beaver utilized measureable amounts of herbaceous vegetation . However, the utilization of herbs by the beaver requires further investigation. A system of ex~sures and enclosures of herbaceous vegetation plots was used to study the utilization of sedges , grasses , and forbs . The beaver indicated stronger species preference for willow as compared to aspen . The size preference for willow was in the 1.0 to 10.0 centimeters basal diameter classes , while the beaver utilization of aspen indicated a preference for the largest trees with basal diameter greater than 20.0 centimeters. Willow was the most important plant in the low lying areas with regard to distribution, abundance and to produce sustained yield. The beaver used this plant for food and construction throughout the study area. The distribution of aspen was limited. and this species did not appear to produce more than one crop in the lifetime of a beaver colony. Nine out of 15 woody plant types were sampled by the beaver in this region. A plot-intercept transect technique was used for systematic vegetation sampling of the woody vegetation in six intensively studied watersheds. The beaver population of the Porcupine Hills region of SW-Alberta is believed to depend upon the chinooks. During the 1971 ground census, a total of 60 active beaver colonies were tallied on the 930 square kilometers large study area. The beaver of the region were not found to store large food caches during fall and winter, however, they are believed to collect feed periodically throughout the winter months. It was observed that the severe winter in 1968-69, reduced by 27 per cent the number of active beaver colonies within the study area. The Porcupine Hills region had 0.07 beaver colony per square kilometer in 1971, a low density of beaver colonies due to the rough topography of the area. However, the importance of the beaver ponds was somewhat clarified as they provide increased moisture, which lessens the fire damage, and store water for wildlife and cattle in the area. Meteorological data was collected by the author in collaboration with the Department of Transport.

Investigations into the extraction and the determination of polycyclic aromatic hydrocarbons (PAHs) from water by solid-phase extraction and capillary gas chromatography/ mass spectrometry

Factors affecting the detennination of PAHs by capillary GC/MS were studied. The effect of the initial column temperature and the injection solvent on the peak areas and heights of sixteen PAHs, considered as priority pollutants, USillg crosslinked methyl silicone (DB!) and 5% diphenyl, 94% dimethyl, 1% vinyl polysiloxane (DBS) columns was examined. The possibility of using high boiling point alcohols especially butanol, pentanol, cyclopentanol, and hexanol as injection solvents was investigated. Studies were carried out to optimize the initial column temperature for each of the alcohols. It was found that the optimum initial column temperature is dependent on the solvent employed. The peak areas and heights of the PAHs are enhanced when the initial column temperature is 10-20 c above the boiling point of the solvent using DB5 column, and the same or 10 C above the boiling point of the solvent using DB1 column. Comparing the peak signals of the PAHs using the alcohols, p-xylene, n-octane, and nonane as injection solvents, hexanol gave the greatest peak areas and heights of the PAHs particularly the late-eluted peaks. The detection limits were at low pg levels, ranging from 6.0 pg for fluorene t9 83.6 pg for benzo(a)pyrene. The effect of the initial column temperature on the peak shape and the separation efficiency of the PARs was also studied using DB1 and DB5 columns. Fronting or splitting of the peaks was obseIVed at very low initial column temperature. When high initial column temperature was used, tailing of the peaks appeared. Great difference between DB! and.DB5 columns in the range of the initial column temperature in which symmetrical.peaks of PAHs can be obtained is observed. Wider ranges were shown using DB5 column. Resolution of the closely-eluted PAHs was also affected by the initial column temperature depending on the stationary phase employed. In the case of DB5, only the earlyeluted PAHs were affected; whereas, with DB1, all PAHs were affected. An analytical procedure utilizing solid phase extraction with bonded phase silica (C8) cartridges combined with GC/MS was developed to analyze PAHs in water as an alternative method to those based on the extraction with organic solvent. This simple procedure involved passing a 50 ml of spiked water sample through C8 bonded phase silica cartridges at 10 ml/min, dried by passing a gentle flow of nitrogen at 20 ml/min for 30 sec, and eluting the trapped PAHs with 500 Jll of p-xylene at 0.3 ml/min. The recoveries of PAHs were greater than 80%, with less than 10% relative standard deviations of nine determinations. No major contaminants were present that could interfere with the recognition of PAHs. It was also found that these bonded phase silica cartridges can be re-used for the extraction of PAHs from water.

Beaverdams 1812-1814, 1912-1914

On cover: Beaverdams, 1812-14-1912-14.

Investigations into the determination of polycyclic aromatic hydrocarbons (PAHs) and polychlorinated biphenyls (PCBs) by capillary gas chromatography

Factors involved in the determination of PAHs (16 priority PAHs as an example) and PCBs (10 PCB congeners, representing 10 isomeric groups) by capillary gas chromatography coupled with mass spectrometry (GC/MS, for PAHs) and electron capture detection (GC/ECD , for PCBs) were studied, with emphasis on the effect of solvent. Having various volatilities and different polarities, solvent studied included dichloromethane, acetonitrile, hexan e, cyclohexane, isooctane, octane, nonane, dodecane, benzene, toluene, p-xylene, o-xylene, and mesitylene. Temperatures of the capillary column, the injection port, the GC/MS interface, the flow rates of carrier gas and make-up gas, and the injection volume were optimized by one factor at a time method or simplex optimization method. Under the optimized conditions, both peak height and peak area of 16 PAHs, especially the late-eluting PAHs, were significantly enhanced (1 to 500 times) by using relatively higher boiling point solvents such as p-xylene and nonane, compared with commonly used solvents like benzene and isooctane. With the improved sensitivity, detection limits of between 4.4 pg for naphthalene and 30.8 pg for benzo[g,h,i]perylene were obtained when p-xylene was used as an injection solvent. Effect of solvent on peak shape and peak intensity were found to be greatly dependent on temperature parameters, especially the initial temperature of the capillary column. The relationship between initial temperature and shape of peaks from 16 PAHs and 10 PCBs were studied and compared when toluene, p-xylene, isooctane, and nonane were used as injection solvents. If a too low initial temperature was used, fronting or split of peaks was observed. On the other hand, peak tailing occurred at a too high initial column temperature. The optimum initial temperature, at which both peak fronting and tailing were avoided and symmetrical peaks were obtained, depended on both solvents and the stationary phase of the column used. On a methyl silicone column, the alkane solvents provided wider optimum ranges of initial temperature than aromatic solvents did, for achieving well-shaped symmetrical GC peaks. On a 5% diphenyl: 1% vinyl: 94% dimethyl polysiloxane column, when the aromatic solvents were used, the optimum initial temperature ranges for solutes to form symmetrical peaks were improved to a similar degree as those when the alkanes were used as injection solvents. A mechanism, based on the properties of and possible interactions among the analyte, the injection solvent, and the stationary phase of the capillary column, was proposed to explain these observations. The effect of initial temperature on peak height and peak area of the 16 PAHs and the 10 PCBs was also studied. The optimum initial temperature was found to be dependent on the physical properties of the solvent used and the amount of the solvent injected. Generally, from the boiling point of the solvent to 10 0C above its boiling point was an optimum range of initial temperature at which cthe highest peak height and peak area were obtained.

Gas chromatographic electron capture negative ionization mass spectrometric (GC/ECNI/MS) determination of unique fluorinated compounds in the sediments of Lake Ontario and the effect of high-boiling alcohols (as injection solvents) on chromatographic behaviour of polycyclic aromatic hydrocarbons in gas chromatography

Part I - Fluorinated Compounds A method has been developed for the extraction, concentration, and determination of two unique fluorinated compounds from the sediments of Lake Ontario. These compounds originated from a common industrial landfill, and have been carried to Lake Ontario by the Niagara River. Sediment samples from the Mississauga basin of Lake Ontario have been evaluated for these compounds and a depositional trend was established. The sediments were extracted by accelerated solvent extraction (ASE) and then underwent clean-up, fractionation, solvent exchange, and were concentrated by reduction under nitrogen gas. The concentrated extracts were analyzed by gas chromatography - electron capture negative ionization - mass spectrometry. The depositional profile determined here is reflective of the operation of the landfill and shows that these compounds are still found at concentrations well above background levels. These increased levels have been attributed to physical disturbances of previously deposited contaminated sediments, and probable continued leaching from the dumpsite. Part II - Polycyclic Aromatic Hydrocarbons Gas chromatography/mass spectrometry is the most common method for the determination of polycyclic aromatic hydrocarbons (PAHs) from various matrices. Mass discrimination of high-boiling compounds in gas chromatographic methods is well known. The use of high-boiling injection solvents shows substantial increase in the response of late-eluting peaks. These solvents have an increased efficiently in the transfer of solutes from the injector to the analytical column. The effect of I-butanol, I-pentanol, cyclopentanol, I-hexanol, toluene and n-octane, as injection solvents, was studied. Higher-boiling solvents yield increased response for all PAHs. I -Hexanol is the best solvent, in terms of P AH response, but in this solvent P AHs were more susceptible to chromatographic problems such as peak splitting and tailing. Toluene was found to be the most forgiving solvent in terms of peak symmetry and response. It offered the smallest discrepancies in response, and symmetry over a wide range of initial column temperatures.

The Columbian Newspaper vol. IV no. 1105- June 12, 1813

The "Columbian" was established by Mr. Holt in 1808 as an "organ of the Clintonians" (Journalism in the United States, from 1690-1872 By Frederic Hudson) and a replacement to the "Citizen". It was a passionate Democratic paper that supported both Jefferson and Madison. Holt later sold the "Columbian" to Alden Spooner, who published the Long Island "Star". The Columbian ceased in 1821. This issue includes the following War of 1812 topics: Page 2: copies of letters from U.S. Gen. H. Dearborn describing the U.S. attack on Ft. George 27 May 1813; letter from Gen. H. Dearborn describing U.S. pursuit of British troops at Beaver Dams and the U.S. capture of Fort Erie; list of U.S. killed and wounded in Commodore Isaac Chauncey's squadron in attack on York 27 April, 1813; list of killed and wounded in Commodore Isaac Chauncey's squadron in attack on Ft. George 27 May 1813; abstract of the cartel for the exchange of prisoners of war between Great Britain and the United States; mention of troop movements through New York on their way to the battle front; list of persons killed or lost on the privateer Saratoga; Page 3: account of the loss of the U.S. war ships the Growler and Eagle to the British; news from Quebec and Kingston of troop movements; U.S. ship Syren unsuccessfully pursues British ship Herald; account of a U.S. cargo ship being captured by a British military ship; account of U.S. ship Siro capturing British ship Loyal Sam; report from Halifax of recent British troop and ship movements; list of recent troop enrollments in various states; report of British troop build up in Kingston;

Sketches of the Battle Fields of Ontario from the War of 1812, July 15, 1876.

Accompanying caption from the Canadian Illustrated News, July 15, 1876: “We publish today a page of sketches consisting of the following battle fields in Ontario :--Lundy’s Lane where, without doubt, the hardest fought battle of 1812-15 took place, and in which more troops were engaged than in any other engagement of that war : the battle field of Stony Creek where the Canadians and Indians made a night attack on the Americans and achieved a victory over a greatly superior force and obliged the Americans to retreat back to the shelter of Old Fort George which was the scene of many engagements during the war. Beaver Dam battle field is just in the suburbs of the thriving village of Thorold, and the monument covers the remains of several soldiers whose bodies were unearthed during the building of the new Welland Canal at that place.”

The Columbian, 12 June 1813 (vol. 4, no. 1105) - Newspaper

Volumes of interest were published between 1812 and 1815 with articles about the War of 1812. Issue for June 12, 1813 includes copies of letters from U.S. Gen. H. Dearborn describing the U.S. attack on Ft. George 27 May 1813; letter from Gen. H. Dearborn describing U.S. pursuit of British troops at Beaver Dams and the U.S. capture of Fort Erie; list of U.S. killed and wounded in Commodore Isaac Chauncey’s squadron in attack on York 27 April, 1813; list of killed and wounded in Commodore Isaac Chauncey’s squadron in attack on Ft. George 27 May 1813; abstract of the cartel for the exchange of prisoners of war between Great Britain and the United States; mention of troop movements through New York on their way to the battle front; list of persons killed or lost on the privateer Saratoga; account of the loss of the U.S. war ships the Growler and Eagle to the British; news from Quebec and Kingston of troop movements; report of launching of British ship Sir George Prevost; announcement of sending of 5 American infantry companies to Burlington from Bennington, Vermont; U.S. ship Syren unsuccessfully pursues British ship Herald; account of a U.S. cargo ship being captured by a British military ship; account of U.S. ship Siro capturing British ship Loyal Sam; report from Halifax of recent British troop and ship movements; list of recent troop enrollments in various states; report of British troop build up in Kingston.

The Columbian, 9 July 1813 (vol. 4, no. 1127) - Newspaper

Volumes of interest were published between 1812 and 1815 with articles about the War of 1812. Issue for July 9, 1813 includes a report of the Battle of Beaver Dams. Issue for July 29, 1813 also includes a report of the Battle of Beaver Dams.

Boston Gazette, 12 July 1813 (vol. 39, no. 6) - Newspaper

Volumes of interest were published between 1812 and 1815 with articles about the War of 1812. Issue for July 12, 1813 includes news from the War of 1812 at Sackets Harbour, Albany, and Fort George (relating to the Battle of Beaver Dams)

Letter written by Mahlon Taylor to Samuel Clarke commenting on US troops during Fort George occupation, July 26, 1813

Fort George, situated on the west side of the Niagara River in Niagara-on-the-Lake, served as the headquarters for the Centre Division of the British Army during the War of 1812. On May 25, 1813, the Americans launched an artillery attack on the Fort, destroying most of the buildings. Two days later, the Americans invaded the Town of Niagara and occupied Fort George. They remained in the Fort for almost seven months, but suffered defeats at the Battle of Stoney Creek and Beaver Dams. Only a small number of militia remained stationed at the Fort. Fearing an attack by the British, the Americans retreated back across the Niagara River in December, 1813. The Fort remained in British possession for the rest of the War.