Production under glass : working conditions and class-consciousness of the Niagara greenhouse workers

This study applies a Marxist theoretical paradigm to examine the working conditions of greenhouse workers in the Niagara Region, and the range of factors that bear upon the formation of their class-consciousness. The Niagara greenhouse industry represents one of the most developed horticultural regions in Canada and plays a prominent role in the local economy. The industry generates substantial revenues and employs a significant number of people, yet the greenhouse workers are paid one of the lowest rates in the region. Being classified as agricultural workers, the greenhouse employees are exempted from many provisions of federal and provincial labour regulations. Under the current provincial statutes, agricultural workers in Ontario are denied the right to organize and bargain collectively. Except for a few technical and managerial positions, the greenhouse industry employs mostly low-skilled workers who are subjected to poor working conditions that stem from the employer's attempts to adapt to larger structural imperatives of the capitalist economy. While subjected to these poor working conditions, the greenhouse workers are also affected by objectively alienated social relations and by ruling class ideological domination and hegemony. These two sets of factors arise from the inherent conflict of interests between wage-labour and capital but also militate against the development of class-consciousness. Semi-structured interviews were conducted with 12 greenhouse workers to examine the role played by their material circumstances in the formulation of their social and political views as well as the extent to which they are aware of their class location and class interests. The hegemonic notions of 'common sense' acted as impediments to formation of classconsciousness. The greenhouse workers have virtually no opportunities to access alternative perspectives that would address the issues associated with exploitation in production and offer solutions leading to 'social justice'. Fonnidable challenges confront any organized political body seeking to improve the conditions of the working people.

1,1-enediamines and β-substituted enamines in heterocyclic synthesis

The work in this thesis mainly deals with l,l-enediamines and ~ -substituted enamines (push-pull olefines) and their reactions, leading to the formation of a number of heterocycles. Various ~-substituted enamines were prepared by a 'one pot synthesis' in which a l,l-enediamine presumably acts as an intermediate. These enamines, various substituted crotonamides and propenamides, were made by using two different orthoesters, various secondary and primary amines and cyanoacetamide. Their structures, mechanism of formation and geometry are discussed. A synthetic route to various unsymmetrically substituted pyridines was examined. Two substituted pyridinones were obtained by using two different ~-substituted enamines and cyanoacetamide. In one case a dihydropyridine was isolated. This dihydropyridine, on heating in acidic conditions, gave a pyridinone, which confirmed this dihydropyridine as an intermediate in this pyridine synthesis. A new synthetic method was used to make highly substituted pyridinones, which involved the reaction of l,l-enediamines with the ~-substituted enamines. A one pot synthesis and an interrupted one pot synthesis were used to make these pyridinones. Two different orthoesters and three different secondary amines were used. Serendipitous formation of a pyrimidinone was observed when pyrrolidine was used as the secondary amine and triethyl orthopropionate was used as the orthoester. In all cases cyanoacetamide was used as the carbon acid. This pyridine synthesis was designed with aI, l-enediamine as the Michael donor and the ~ -substituted enamines as Michael acceptors. Substituted ureas were obtained in two cases, which was a surprise. Some pyrimidines were made by reacting two substituted enamines with two different amidines. When benzamidine was used, the expected pyrimidines were obtained. But, when 2-benzyl-2-thiopseudourea (which is also an amidine) was used, of the two expected pyrimidines, only one was obtained. In the other case, an additional substitution reaction took place in which the S-benzyl group was lost. An approach to quinazolone and benzothiadiazine synthesis is discussed. Two compounds were made from 1, I-dimorpholinoethene

Low frequency Raman scattering in amorphous materials: fused quartz, "pyrex" boro-silicate glass and soda-lime silicate glass

Raman scattering in the region 20 to 100 cm -1 for fused quartz, "pyrex" boro-silicate glass, and soft soda-lime silicate glass was investigated. The Raman spectra for the fused quartz and the pyrex glass were obtained at room temperature using the 488 nm exciting line of a Coherent Radiation argon-ion laser at powers up to 550 mW. For the soft soda-lime glass the 514.5 nm exciting line at powers up to 660 mW was used because of a weak fluorescence which masked the Stokes Raman spectrum. In addition it is demonstrated that the low-frequency Raman coupling constant can be described by a model proposed by Martin and Brenig (MB). By fitting the predicted spectra based on the model with a Gaussian, Poisson, and Lorentzian forms of the correlation function, the structural correlation radius (SCR) was determined for each glass. It was found that to achieve the best possible fit· from each of the three correlation functions a value of the SCR between 0.80 and 0.90 nm was required for both quartz and pyrex glass but for the soft soda-lime silicate glass the required value of the SCR. was between 0.50 and 0.60 nm .. Our results support the claim of Malinovsky and Sokolov (1986) that the MB model based on a Poisson correlation function provides a universal fit to the experimental VH (vertical and horizontal polarizations) spectrum for any glass regardless of its chemical composition. The only deficiency of the MB model is its failure to fit the experimental depolarization spectra.

Stereoselective synthesis of 5-substituted pyrrolo[1,2-c]imidazol-3-ones. Access to aldosterone synthase inhibitors and chiral precatalysts

Compounds containing the pyrrolidine moiety are key substructures of compounds with biological activity and organocatalysts. In particular, annulated chiral pyrrolidines with alpha stereogenic centers have aldostereone synthase inhibition activity. In addition, 5-substituted pyrroloimidazol(in)ium salts precursors to N-heterocyclic carbene (NHC) precatalysts are rare due to a lack of convenient synthetic routes to access them. In this thesis is described a rapid synthesis of NHC precursors and a possible route to 5-substituted pyrroloimidazole biologically active compounds. The method involves the preparation of chiral saturated and achiral unsaturated pyrrolo[I,2- c]imidazol-3-ones from N-Cbz-protected t-Butyl proline carboxamide. The resulting starting materials may be used to prepare the target chiral annulated imidazol(in)ium products by a two-step sequence involving first stereoselective lithiation-substitution, followed by POCh induced salt formation.

Surface effect ferromagnetism in pure and reduced strontium titanate

A room temperature ferromagnetic hysteresis is observed in single crystal strontium titanate substrates as purchased from several manufacturers. It was found that polishing all sides of the substrates removed this observed hysteresis, suggesting that the origin of the ferromagnetic behavior resides on the surface of the substrates. X-ray diffraction and energy dispersive x-ray spectra were measured however they were unable to detect any impurity phases. In similar semiconducting oxides it was previously suggested that ferromagnetism could originate in oxygen vacancies or from disorder within the single crystal. To this end substrates were annealed in both air and vacuum in a range of temperatures (600°C to 1100°G) to both create bulk oxygen vacancies and to heal surface damage. Annealing in vacuum was found to create a measureable number of oxygen vacancies however their creation could not be correlated to the ferromagnetic signal of the substrate. Annealing in air was found to effect the remnant moment of the substrate as well as the width of the x-ray diffraction peaks on the unpolished face, weakly suggesting a relation between surface based disorder and ferromagnetism. Argon ion bombardment was employed to create a layer of surface disorder in the polished crystal, however it was not found to induce ferromagnetism. It was found that acid etching was sufficient to remove the ferromagnetism from as purchased samples and similarly simulated handling with stainless steel tweezers was sufficient to re-create the ferromagnetism. It is suggested that the origin of this ferromagnetism in SrTi03 is surface contaminants (mainly iron).

Stereoselective synthesis of substituted hexahydro-3a,4a-diazacyclopentaphenanthren-4-ones and aminoferrocenes

This thesis explored the development of several methodologies for the stereoselective construction of ligand frameworks and some of their applications. The first segment concerns the application of an enantioselective lithiation at an Sp3_ hybridized position adjacent to nitrogen by means of the widely used and typically highly effective enantioselective lithiation with ( -)-sparteine. This investigation was intended to develop a method to install chirality into a system that would be converted into a family of diaminoylidenes for use as phosphine mimics in transition metal catalysis or as nucleophilic reagents. Molecular modeling of the system revealed some key interactions between the substrate and (-)-sparteine that provided general insight into the diamine's mode of action and should lend some predictive value to its future applications. The second portion focuses on the development of methods to access 1,2- disubstituted aminoferrocenes, an underexplored class of metallocenes possessing planar chirality. Two routes were examined involving a diastereoselective and an enantioselective pathway, where the latter method made use of the first BF3-mediated lithiation-substitution to install planar chirality. Key derivatives such as 1,2- aminophosphines, made readily accessible by the new route, were evaluated as ligands for Pd(II), Pt(II) and Ir(I). These complexes show activity in a number of transformations with both achiral and prochiral substrates. Optimization experiments were conducted to prepare enantiomerically enriched 2-substituted-I-aminoferrocenes by direct asymmetric lithiation of BF3-coordinated tertiary aminoferrocenes. A predictive computational model describing the transition state of this reaction was developed in collaboration with Professor Travis Dudding's group (Department of Chemistry, Brock University). The predicted stereochemistry of the process was confirmed by single-crystal X-ray analysis of a 2-phosphino-l-dimethylaminoferrocene derivative. Enantiomerically pure samples of the aminophosphine ligands derived from this new process have given promising preliminary results in the enantioselective hydrogenation of prochiral alkenes and warrant further stUdy in metal-mediated catalysis.

Canadian Niagara Power Glass Slide - Group of men walking through the hydro tunnel

Four men (unidentified) walking in tunnel wearing hard hats and carrying flashlights.

Canadian Niagara Power Glass Slide - Engineer Drawing of Sections of Discharge Tunnel

Consulting Engineer drawing of Sections of the Discharge Tunnel. Included in the drawing is the "cross section of tunnel with timbering" and "longitudinal section showing Timber in straight tunnel". Dated October 1902.

Canadian Niagara Power Glass Slide - Engineer Drawing Hydro Station

Appears to be an engineer's drawing of the Hydro Station. It is a cross-section view of the interior.

Canadian Niagara Power Glass Slide - Plan and Profile of Discharge Tunnel

Plan and profile of discharge tunnel along Niagara River. The horizontal scale is 1 inch = 100 feet, the vertical scale is 1 inch = 40 feet. The drawing is dated November 7, 1902.

Canadian Niagara Power Glass Slide - Sketch Showing Proposed Masonry Lining Near Portal of Tunnel

Drawing by consulting engineer dated October 19, 1901. Scale is noted as 1/4 inch = 1 foot.

Canadian Niagara Power Glass Slide - Drawing: Section thru Wheelpit

Drawing of "Section thru Wheelpit" dated September 1925. Shows unit no.1 through unit no.11, power house floor and water surface.

Canadian Niagara Power Glass Slide - Engineer Drawing (untitled)

Engineer drawing (untitled), some of the labels read "exciter chamber", "fore bay", "power house floor".

Canadian Niagara Power Glass Slide - Men in Tunnel

Four men (unknown) standing in the tunnel wearing hard hats.

Canadian Niagara Power Glass Slide - Large Group in Tunnel

A large group of men in hard hats in the tunnel. The names of the men are unknown.