The seasons of Zarathustra and their correspondence to the metamorphoses of the spirit

Nietzsche employed metaphors frequently throughout his works. This is especially true in Thus Spoke Zarathustra. Although this is often aesthetically pleasing, it can be very difficult for the reader to understand the nuances and interconnections with the various metaphors. This is generally considered one of the main drawbacks of Thus Spoke Zarathustra. While it is beautifully written in a style that is incomparable today, much of what it is attempting to communicate is lost on the reader. This thesis explores the connection between the metamorphoses of the spirit and the seasons in Thus'Spoke Zarathustra, with the camel spirit corresponding to autumn, the lion spirit with winter, the child spirit with spring, and finally the Overman with summer. Although the Overman is not included among the three metamorphoses of the spirit, it will be argued that the Overman is a separate metamorphosis and must not be conflated with the child spirit despite their similarities. While Thus Spoke Zarathustra will be the primary text used, Nietzsche's other works will be employed to demonstrate that this connection between the metamorphoses of the spirit and the seasons runs through much of his thought. By demonstrating how the seasons are used in Thus Spoke Zarathustra, a deeper understanding of the work will be revealed. Further, this thesis will demonstrate that it is an intentional connection, and not merely coincidental or something that has been constructed and imposed upon the work. Bringing this correspondence between the metamorphoses of the spirit and the seasons to light will result in the need to rethink particular notions of Nietzsche's philosophy. The most apparent involves the Overman and the process of overcoming. Although the Overman has often been viewed as "the end" in the cycle of metamorphoses, it will be argued that this is not the case. The typical interpretation of the metamorphoses of the spirit regard it as a linear progression; however, it will be shown that the metamorphoses of the spirit is cyclical with the camel, lion, and child spirits endlessly repeating, much like the seasons.

Hydraulic and fluvial geomorphological models for a bedrock channel reach of the Twenty Mile Creek /

Bedrock channels have been considered challenging geomorphic settings for the application of numerical models. Bedrock fluvial systems exhibit boundaries that are typically less mobile than alluvial systems, yet they are still dynamic systems with a high degree of spatial and temporal variability. To understand the variability of fluvial systems, numerical models have been developed to quantify flow magnitudes and patterns as the driving force for geomorphic change. Two types of numerical model were assessed for their efficacy in examining the bedrock channel system consisting of a high gradient portion of the Twenty Mile Creek in the Niagara Region of Ontario, Canada. A one-dimensional (1-D) flow model that utilizes energy equations, HEC RAS, was used to determine velocity distributions through the study reach for the mean annual flood (MAF), the 100-year return flood and the 1,000-year return flood. A two-dimensional (2-D) flow model that makes use of Navier-Stokes equations, RMA2, was created with the same objectives. The 2-D modeling effort was not successful due to the spatial complexity of the system (high slope and high variance). The successful 1 -D model runs were further extended using very high resolution geospatial interpolations inherent to the HEC RAS extension, HEC geoRAS. The modeled velocity data then formed the basis for the creation of a geomorphological analysis that focused upon large particles (boulders) and the forces needed to mobilize them. Several existing boulders were examined by collecting detailed measurements to derive three-dimensional physical models for the application of fluid and solid mechanics to predict movement in the study reach. An imaginary unit cuboid (1 metre by 1 metre by 1 metre) boulder was also envisioned to determine the general propensity for the movement of such a boulder through the bedrock system. The efforts and findings of this study provide a standardized means for the assessment of large particle movement in a bedrock fluvial system. Further efforts may expand upon this standardization by modeling differing boulder configurations (platy boulders, etc.) at a high level of resolution.

Arsenic speciation by ion-exchange chromatography with on- line determination by hydride generation: electronic modification of the D.C. plasma by photon counting

A method using L-cysteine for the determination of arsenous acid (As(III)), arsenic acid (As(V)), monomethylarsonic acid (MMAA), and dimethylarsinic acid (DMAA) by hydride generation was demonstrated. The instrument used was a d.c. plasma atomic emission spectrometer (OCP-AES). Complete recovery was reported for As(III), As(V), and DMAA while 86% recovery was reported for MMAA. Detection limits were determined, as arsenic for the species listed previously, to be 1.2, 0.8, 1.1, and 1.0 ngemL-l, respectively. Precision values, at 50 ngemL-1 arsenic concentration, were f.80/0, 2.50/0, 2.6% and 2.6% relative standard deviation, respectively. The L-cysteine reagent was compared directly with the conventional hydride generation technique which uses a potassium iodide-hydrochloric acid medium. Recoveries using L-cysteine when compared with the conventional method provided the following results: similar recoveries were obtained for As(III), slightly better recoveries were obtained for As(V) and MMAA, and significantly better recoveries for DMAA. In addition, tall and sharp peak shapes were observed for all four species when using L-cysteine. The arsenic speciation method involved separation by ion exchange .. high perfonnance liquid chromatography (HPLC) with on-line hydride generation using the L.. cysteine reagent and measurement byOCP-AES. Total analysis time per sample was 12 min while the time between the start of subsequent runs was approximately 20 min. A binary . gradient elution program, which incorporated the following two eluents: 0.01 and 0.5 mM tri.. sodium citrate both containing 5% methanol (v/v) and both at a pH of approximately 9, was used during the separation by HPLC. Recoveries of the four species which were measured as peak area, and were normalized against As(III), were 880/0, 290/0, and 40% for DMAA, MMAA and As(V), respectively. Resolution factors between adjacent analyte peaks of As(III) and DMAA was 1.1; DMAA and MMAA was 1.3; and MMAA and As(V) was 8.6. During the arsenic speciation study, signals from the d.c. plasma optical system were measured using a new photon-signal integrating device. The_new photon integrator developed and built in this laboratory was based on a previously published design which was further modified to reflect current available hardware. This photon integrator was interfaced to a personal computer through an AID convertor. The .photon integrator has adjustable threshold settings and an adjustable post-gain device.

Interrogation of Prisoner - Heaquarters 1st Division, American Expeditionary Forces, 27 May 1918

A prisoner interrogation report dated 27 May 1918. The report reads: "I. PRISONER X. 1st. Battalion, 272 Res. Rogt., 82d Res. 1. CIRCUMSTANCES OF CAPTURE; Captured, while attempting to raid our trenches, at point 1719 at about 7A.M. 2. INFORMATION OBTAINED FROM PRISONER (a) Between point 1814 and point 175242 the German trenches appear to be held by three companies, each numbering 3 platoons, each platoon numbering about 40 men. Each company has 4 light machine guns in the first lines, these machine guns distributed along the first trench (one of them in particular is located at bond in hostile trench at point 17215 and another at about 17245. Each company, furthermore, has one platoon (weak in numbers) in support in the ravine north of Cantigny. These platoons are in dugouts dug into the side of the hill approximately between points 28215 and 2223. Each of these support platoons has two light machine guns at its disposal. Company commanders dugout is at some point along the line of dugouts occupied by the support platoons. Another company commander's dugout (Co.3) is at point 1815 about 15 meters behind the German trench which runs along the edge of the town of Cantigny. There is a communication trench between the cemetery at 2018 and the front line at 18179. It is believed that there is a machine gun at point 17245 kept in a dugout dug under the road. The reserve battalion is believed to be at a fairly great distance from the front (near Bouillancourt). The prisoner, on the other hand, states that it may have been moved up."

Maid of the Mist, Niagara, U.S.A.

The description of the image is "(6) Majestically Grand - the Falls from the 'Maid of the Mist,' Niagara, U.S.A.". The reverse of the image reads "You are on the deck of the small but sturdy little steamer that runs along near the foot of the falls. At this moment you are pretty nearly mid-stream, looking south. The American shore are up over your left shoulder. That tall, dark cliff at the extreme left of what you see is Goat Island. The people up there outlined against the sky look like dolls and no wonder; they are more than 160 feet above your head. Some of them are looking off over the unspeakable grandeurs of the Horseshoe Fall there at the right; some are without doubt looking down at the very boat and remarking that the passengers look like dolls. It is an awesome experience to go so near that never-ceasing downpour of waters from the sky. The air is full of the roar and iridescent spray, and it seems as if the boat must be drawn in under the overwhelming floods never to rise again. Yet, curiously enough, the river right around the boat is not so madly excited as you might expect. It seems more like some great creature, dazed, bewildered, stunned by some incredible experience and not yet quite aware of what has happened. (When it gets down into the Whirlpool Rapids, two miles below here, it is dramatically alive to its situation!) The gigantic curve of the cliffs, reaching in up-stream straight ahead, makes a contour line of over 3000 feet before it comes up against the Canadian banks on the west (right). Geologists say that the Falls ages ago must have been at least seven miles farther down the river (behind you) and have gradually won their way back. Even now the curve of the Horseshoe is worn away from two to four feet in a year. No wonder; 12, 000, 000 cubic feet of water (about 375, 000 tons) sweep over the rocks in one minute, and the same the next minute and the next and the next. See Niagara through the Stereoscope, with special maps locating all the landmarks about the Falls.

Assessing the Reproducibility of Clustering of Molecular Dynamics Conformations on Self-Organizing Maps

The goal of most clustering algorithms is to find the optimal number of clusters (i.e. fewest number of clusters). However, analysis of molecular conformations of biological macromolecules obtained from computer simulations may benefit from a larger array of clusters. The Self-Organizing Map (SOM) clustering method has the advantage of generating large numbers of clusters, but often gives ambiguous results. In this work, SOMs have been shown to be reproducible when the same conformational dataset is independently clustered multiple times (~100), with the help of the Cramérs V-index (C_v). The ability of C_v to determine which SOMs are reproduced is generalizable across different SOM source codes. The conformational ensembles produced from MD (molecular dynamics) and REMD (replica exchange molecular dynamics) simulations of the penta peptide Met-enkephalin (MET) and the 34 amino acid protein human Parathyroid Hormone (hPTH) were used to evaluate SOM reproducibility. The training length for the SOM has a huge impact on the reproducibility. Analysis of MET conformational data definitively determined that toroidal SOMs cluster data better than bordered maps due to the fact that toroidal maps do not have an edge effect. For the source code from MATLAB, it was determined that the learning rate function should be LINEAR with an initial learning rate factor of 0.05 and the SOM should be trained by a sequential algorithm. The trained SOMs can be used as a supervised classification for another dataset. The toroidal 10×10 hexagonal SOMs produced from the MATLAB program for hPTH conformational data produced three sets of reproducible clusters (27%, 15%, and 13% of 100 independent runs) which find similar partitionings to those of smaller 6×6 SOMs. The χ^2 values produced as part of the C_v calculation were used to locate clusters with identical conformational memberships on independently trained SOMs, even those with different dimensions. The χ^2 values could relate the different SOM partitionings to each other.