Geochemistry and mineralogical association of heavy metal contaminants in fine grained sediment, Welland River, Southern Ontario /

This investigation of geochemistry and mineralogy of heavy metals in fine grained (<63^m) sediment of the Welland River was imdertaken to: 1) describe metal dispersion patterns relative to a source, identify minerals forming and existing at the outfall region and relate sediment particle size to chemistry; 2) to delineate sample handling, preparation and evaluate, modify and develop analytical methods for heavy metal analysis of complex environmental samples. Ajoint project between Brock University and Geoscience Laboratories was initiated to test a contaminated site of the Welland River at the base of Atlas Speciality Steels Co. Methods were developed and utilized for particle size separation and two acid extraction techniques: 1) Partial extraction; 2) Total extraction. The mineralogical assessment identified calcite, dolomite, quartz and clays. These minerals are typical of the carbonate-shale rock basement of the Niagara Peninsula. Minerals such as, mullite and ferrocolumbite were found at the outfall region. These are not typical of the local geology and are generally associated with industrial pollutants. Partial and total extraction techniques were used to characterize the sediments based on chemical distribution, elemental behaviour and analytical differences. The majority of elements were lower in concentration in the partial extraction technique; suggesting these elements are bound in an acid extractable phase (exchangeable, organic and carbonate phases). The total extraction technique yielded higher elemental concentrations taking difficult oxides and silicates into solution. Geochemical analyses of grain size separates revealed that heavy metal (Co, Ni, V, Mn, Fe, Ba) concentrations did not increase with decreasing grain size. This is a function of the anthropogenic mill scale input into the river. The background elements (Sc, Y, Sr, Mg, Al and Ti) showed an increase in concentration to the finest grain size suggesting that it is directly related to the local mineralogy and geology. Dispersion patterns ofmetals fall into two distinct categories: 1) the heavy metals (Co, Cu, Ni, Zn, V and Cr), and 2) the background elements (Be, Sc, Y, Sr, Al and Ti). The heavy metals show a marked increase in the outfall region, while the background elements show a significant decrease at the outfall. This pattern is attributed to a "dilution effect" ofthe natural sediments by the anthropogenic mill scale sediments. Multivariant statistical analysis and correlation coefficient matrix results clearly support these results and conclusions. These results indicate the outfall region ofthe Welland River is highly contaminated with to heavy metals from the industrialized area of Welland. A short distance downstream, the metal concentrations return to baseline geochemical levels. It appears, contaminants rapidly come out of suspension and are deposited in close proximity to the source. Therefore, it is likely that dredging the sediment from the river may cause resuspension of contaminated sediments, but may not distribute the sediment as far as initially anticipated.

Armor coats, inverse grading, and streambed scour in selected streams of Southern Ontario and Western New York /

Surface size analyses of Twenty and Sixteen Mile Creeks, the Grand and Genesee Rivers and Cazenovia Creek show three distinct types of bed-surface sediment: 1) a "continuous" armor coat which has a mean size of -6.5 phi and coarser, 2) a "discontinuous" armor coat which has a mean size of approximately -6.0 phi and 3) a bed with no armor coat which has a mean surface size of -5.0 phi and finer. The continuous armor coat completely covers and protects the subsurface from the flow. The discontinuous armor coat is composed of intermittently-spaced surface clasts, which provide the subsurface with only limited protection from the flow. The bed with no armor coat allows complete exposure of the subsurface to the flow. The subsurface beneath the continuous armor coats of Twenty and Sixteen Mile Creeks is possibly modified by a "vertical winnowing" process when the armor coat is p«natrat«d. This process results in a welld «v«loped inversely graded sediment sequence.vertical winnowing is reduced beneath the discontinuous armor coats of the Grand and Genesee Rivers. The reduction of vertical winnowing results in a more poorly-developed inverse grading than that found in Twenty and sixteen Mile Creeks. The streambed of Cazenovia Creek normally is not armored resulting in a homogeneous subsurface which shows no modification by vertical winnowing. This streambed forms during waning or moderate flows, suggesting it does not represent the maximum competence of the stream. Each population of grains in the subsurface layers of Twenty and sixteen Mile Creeks has been modified by vertical winnowing and does not represent a mode of transport. Each population in the subsurface layers beneath a discontinuous armor coat may partially reflect a transport mode. These layers are still inversely graded suggesting that each population is affected to some degree by vertical winnowing. The populations for sediment beneath a surface which is not armored are probably indicative of transport modes because such sediment has not been modified by vertical winnowing. Bed photographs taken in each of the five streams before and after the 1982-83 snow-melt show that the probability of movement for the surface clasts is a function of grain size. The greatest probability of of clast movement and scour depth of this study were recorded on Cazenovia Creek in areas where no armor coat is present. The scour depth in the armored beds of Twenty and Sixteen Mile Creeks is related to the probability of movement for a given mean surface size.

Geological image processing of petrographic thin sections using the rotating polarizer stage

One of the fundamental problems with image processing of petrographic thin sections is that the appearance (colour I intensity) of a mineral grain will vary with the orientation of the crystal lattice to the preferred direction of the polarizing filters on a petrographic microscope. This makes it very difficult to determine grain boundaries, grain orientation and mineral species from a single captured image. To overcome this problem, the Rotating Polarizer Stage was used to replace the fixed polarizer and analyzer on a standard petrographic microscope. The Rotating Polarizer Stage rotates the polarizers while the thin section remains stationary, allowing for better data gathering possibilities. Instead of capturing a single image of a thin section, six composite data sets are created by rotating the polarizers through 900 (or 1800 if quartz c-axes measurements need to be taken) in both plane and cross polarized light. The composite data sets can be viewed as separate images and consist of the average intensity image, the maximum intensity image, the minimum intensity image, the maximum position image, the minimum position image and the gradient image. The overall strategy used by the image processing system is to gather the composite data sets, determine the grain boundaries using the gradient image, classify the different mineral species present using the minimum and maximum intensity images and then perform measurements of grain shape and, where possible, partial crystallographic orientation using the maximum intensity and maximum position images.

The sedimentology of unconsolidated deltaic and aeolian sediments east of Dunnville, Ontario /

Surficial sediments east of Dunnville, Ontario representing a limited deltaic/lacustrine/aeolian system are investigated with the aim of defining and interpreting their geological history by means of exarrrrning their sedimentology and interrelationships. The Folk and \oJard grain size statistics of samples fran the area were calculated. These sample parameters were e1en plotted on maps to detennine regional patterns. The strongest pattern observed was one of distinct fining to the east, away fran the sand source. Aeolian deposits were fourrl to be better sorted than the surrcunding sediments. The grain size parameter values were also plotted on bivariate graphs in an attempt to separate the samples according to depositional environment. This exercise met with little success, as rrost of the sediments sampled in the area have similar grain size parameters. This is believed to be because the sediment sources for the different environments (delta, distal delta, aeolian dune) are intimately related, to the point that nnst dunes appear to have been sourcErl fran immediately local sediments. It is FOstulated that in such a srrall sedimentological sub-system, sediments were not involved in active transport for a length of time sufficient for the rraterial to cane to equilibritnn with its transporting medium. Thus, fe..v distinctive patterns of parameters were developed that would enable one to differentiate between various environments of neposition. The i.rnTaturity of rrany dune forms and the i.Imaturity of mineralogical composition of all deposits support the above hyt:XJthesis of limited transport time. Another hypothesis proposen is that eadh geologically or geographically distinct area or "sub-system" rray have its o,.m "signature" of grain size relationships as plotted on bivariate graphs. Thus, the emphasis, concerning graphs of this type, should not be placErl on attempting to nifferentiate between various environnents of deposition, hut raB1er on investigating the interrelationships between sanples am environments within that "sub-system". Through the course of this investigation, the existence of nelta plain distributary Channels in the thesis area is SUG0ested, and the mscovery of significantly mfferent sub-units within the TUnnville dune sediments is documented. It is inferred by reference to other authors interpretations of the glacial history of the area, that the tirre of effective aeolian acti vi ty in the Dunnville area was between 12,300 to 12,100 years R.p.

Determining rotational direction of rotation structures using prolate shaped grains within till

Micromorphology is used to analyze a wide range of sediments. Many microstructures have, as yet, not been analyzed. Rotation structures are the least understood of microstructures: their origin and development forms the basis of this thesis. Direction of rotational movement helps understand formative deformational and depositional processes. Twenty-eight rotation structures were analyzed through two methods of data extraction: (a) angle of grain rotation measured from Nikon NIS software, and (b) visual analyses of grain orientation, neighbouring grainstacks, lineations, and obstructions. Data indicates antithetic rotation is promoted by lubrication, accounting for 79% of counter-clockwise rotation structures while 21 % had clockwise rotation. Rotation structures are formed due to velocity gradients in sediment. Subglacial sediments are sheared due to overlying ice mass stresses. The grains in the sediment are differentially deformed. Research suggests rotation structures are formed under ductile conditions under low shear, low water content, and grain numbers inducing grain-to-grain interaction.

HG 186.9-187.0 D.E.

Coarse grained sediment with a few fine grained matrices. Brown sediment with small to medium sized clasts. Clasts range from sub-angular to sub-rounded. Organic material present. It contains rotation structures throughout as well as edge-to-edge grain crushing. Fine grained clay domains are present and lineations can also be seen. Minor amounts of grain stacking can also be seen.

HG 186.9-187.0 D.E. Thin Section

Coarse grained sample with grains varying from small to medium in size. They range from sub-angular to sub-rounded in shape. The sample is abundant in lineations and comet structures. Minor amounts of grain stacking are present. Inclusions of a clay rich, fine grained domain.

HG 230.75-230.85 Thin Section

Coarse grained sediment with fine grained domains, clay material, rotation structures and lineations. Clasts range from sub-angular to sub-rounded. Mainly brown sediment with darker patches of brown throughout. Major amounts of grain crushing can be seen in the coarse grained material.

HG 244.40-244.50-A Thin Section

Dark brown sediment with sub-angular to sub-rounded clasts. Rotation structures and lineations are common. Clasts ranging from small to large in size. Many large grains are fractured. Minor amounts of grain stacking and crushing can be seen. A few clay and organic rich domains can be seen.

HG 359.55-359.70

Dark brown sediment with mainly small clasts. The clasts range from sub-angular to sub-rounded. Lineations are abundant throughout the sample. Comet structures are also present throughout the sample. Minor amounts of grain crushing and stacking can also be seen.

HG 406.85-406.95

Brown sediment with organic matter and clasts ranging from small to large. The clast shape ranges from sub-angular to sub-rounded. Lineations and grain stacking are the most abundant in this sample. Minor amounts of grain crushing can also be seen.

HG 442.70-442.80

Brown and coarse grained sample with grains ranging from small to large in size. The clast shape ranges from sub-angular to sub-rounded. Lineations are abundant throughout the sample. Minor amounts of grain crushing/stacking can also be seen. A few rotation structures are also present throughout the sample.

HG 484.65-484.80

Brown sediment with multiple domains. Grains range from small to large in size, and angular to sub-rounded in shape. Large amounts of grain crushing can be seen in the coarser domains. The sample is mainly dominated with grain crushing. The finer grained domains contain some clay rich material. Some lineations and rotation structures can also be seen throughout the different domains.

HG 113.20-113.30

Brown sediment with clasts ranging from small to medium in size. The clast shape ranges from angular to sub-rounded. Comet structures, rotation structures, and lineations can be seen throughout the sample. Minor amounts of grain stacking can also be seen.

ARTHUR 3

Dark brown sediment, almost appears black. This may be due to organic material. Clasts are very well dispersed and range from small to medium in size. The clast shape ranges from angular to sub-rounded. Lineations can be seen in this sample. There are also a few examples of grain crushing that can be seen.