Preparing students for the transition from college to work /

The purpose of this study was to examine the perceived preparedness of college students for the transition from college to full-time employment. The study was concerned with the interest and rationale behind developing a required Exit Course for college students in order to improve the college to work transition. As well, possible content of an Exit Course was evaluated. The importance of addressing college to work transitions is highlighted by two phenomena. First, there are specific employability skills that employers in Canada are seeking in newly hired employees. Second, the provincial government in Ontario is determining college funding based on graduate employment statistics which are measured by graduate satisfaction, graduate employment, and employer satisfaction. The research concentrated on the following stakeholders involved in the transition from college to work: (a) current students, (b) recent graduates, (c) support staff who assist students in college to work transition (Career Educators), and (d) employers. Through qualitative research, including focus groups and interviews, these stakeholder groups participated in the research to determine if the Exit Course was a viable solution to facilitate the transition from college to work. Focus groups were conducted with current students, while one-on-one, semi-structured interviews were conducted with recent graduates, Career Educators, and employers. Common themes elicited from the participants included the following: (a) although students were perceived by the participants of this study to be technically prepared for employment, they were perceived to have weak job search skills and unrealistic expectations of the world of work unless they had received the benefits of a Co-operative Education experience; (b) an Exit Course was seen as a viable solution to the issues involved in college to work transition; (c) an Exit Course should be comprised of skills necessary to obtain and succeed in a job and the course should be taught by individuals with extensive qualifications in this area; and (d) there is a need to develop college and business partnerships to ensure that students are connected to employers. Educators within post secondary institutions, specifically colleges, can benefit from the information provided within this study to gain a better understanding of the perceived level of preparedness of students for the transition from college to work. Suggestions with regard to how to improve this transition were made, with specific reference to the addition of an Exit Course as one possible solution.

The development of automated methods for the determination of trace concentrations of carbomate pesticides in water using solid sorbent pre-concentration methods and high performance liquid chromatography /

Several automated reversed-phase HPLC methods have been developed to determine trace concentrations of carbamate pesticides (which are of concern in Ontario environmental samples) in water by utilizing two solid sorbent extraction techniques. One of the methods is known as on-line pre-concentration'. This technique involves passing 100 milliliters of sample water through a 3 cm pre-column, packed with 5 micron ODS sorbent, at flow rates varying from 5-10 mUmin. By the use of a valve apparatus, the HPLC system is then switched to a gradient mobile phase program consisting of acetonitrile and water. The analytes, Propoxur, Carbofuran, Carbaryl, Propham, Captan, Chloropropham, Barban, and Butylate, which are pre-concentrated on the pre-column, are eluted and separated on a 25 cm C-8 analytical column and determined by UV absorption at 220 nm. The total analytical time is 60 minutes, and the pre-column can be used repeatedly for the analysis of as many as thirty samples. The method is highly sensitive as 100 percent of the analytes present in the sample can be injected into the HPLC. No breakthrough of any of the analytes was observed and the minimum detectable concentrations range from 10 to 480 ng/L. The developed method is totally automated for the analysis of one sample. When the above mobile phase is modified with a buffer solution, Aminocarb, Benomyl, and its degradation product, MBC, can also be detected along with the above pesticides with baseline resolution for all of the analytes. The method can also be easily modified to determine Benomyl and MBC both as solute and as particulate matter. By using a commercially available solid phase extraction cartridge, in lieu of a pre-column, for the extraction and concentration of analytes, a completely automated method has been developed with the aid of the Waters Millilab Workstation. Sample water is loaded at 10 mL/min through a cartridge and the concentrated analytes are eluted from the sorbent with acetonitrile. The resulting eluate is blown-down under nitrogen, made up to volume with water, and injected into the HPLC. The total analytical time is 90 minutes. Fifty percent of the analytes present in the sample can be injected into the HPLC, and recoveries for the above eight pesticides ranged from 84 to 93 percent. The minimum detectable concentrations range from 20 to 960 ng/L. The developed method is totally automated for the analysis of up to thirty consecutive samples. The method has proven to be applicable to both purer water samples as well as untreated lake water samples.

Synthesis of isotope-labelled methoxypyrazine compounds as internal standards and quantitative determination of aroma methoxypyrazines in water and wines by solid-phase extraction with isotope dilution-GC-MS /

An efficient way of synthesizing the deuterium labelled analogues of three methoxypyrazine compounds: 2-d3-methoxy-3-isopropylpyrazine, 2-d3-methoxy-3- isobutylpyrazine, and 2-d3-methoxy-3-secbutylpyrazine, has been developed. To confirm that the deuterium labels had been incorporated into the expected positions in the molecules synthesized, the relevant characterization by NMR, HRMS and GC/MS analysis was conducted. Another part of this work involved quantitative determination of methoxypyrazines in water and wines. Solid-phase extraction (SPE) proved to be a suitable means for the sample separation and concentration prior to GC/MS analysis.Such factors as the presence of ethanol, salt, and acid have been investigated which can influence the recovery by SPE for the pyrazines from the water matrix. Significantly, in this work comparatively simple fractional distillation was attempted to replace the conventional steam distillation for pre-concentrating a sample with a relatively large volume prior to SPE. Finally, a real wine sample spiked with the relevant isotope-labelled methoxypyrazines was quantitatively analyzed, revealing that the wine with 10 beetles per litre contained 138 ppt of 2-methoxy-3-isopropylpyrazine. Interestingly, we have also found that 2-methoxy-3-secbutylpyrazine exhibits an extremely low detection limit in GC/MS analysis compared with the detection limit of the other two methoxypyrazines: 2- methoxy-3-isopropylpyrazine and 2-methoxy-3-isobutylpyrazine.

Investigations into the extraction and the determination of polycyclic aromatic hydrocarbons (PAHs) from water by solid-phase extraction and capillary gas chromatography/ mass spectrometry

Factors affecting the detennination of PAHs by capillary GC/MS were studied. The effect of the initial column temperature and the injection solvent on the peak areas and heights of sixteen PAHs, considered as priority pollutants, USillg crosslinked methyl silicone (DB!) and 5% diphenyl, 94% dimethyl, 1% vinyl polysiloxane (DBS) columns was examined. The possibility of using high boiling point alcohols especially butanol, pentanol, cyclopentanol, and hexanol as injection solvents was investigated. Studies were carried out to optimize the initial column temperature for each of the alcohols. It was found that the optimum initial column temperature is dependent on the solvent employed. The peak areas and heights of the PAHs are enhanced when the initial column temperature is 10-20 c above the boiling point of the solvent using DB5 column, and the same or 10 C above the boiling point of the solvent using DB1 column. Comparing the peak signals of the PAHs using the alcohols, p-xylene, n-octane, and nonane as injection solvents, hexanol gave the greatest peak areas and heights of the PAHs particularly the late-eluted peaks. The detection limits were at low pg levels, ranging from 6.0 pg for fluorene t9 83.6 pg for benzo(a)pyrene. The effect of the initial column temperature on the peak shape and the separation efficiency of the PARs was also studied using DB1 and DB5 columns. Fronting or splitting of the peaks was obseIVed at very low initial column temperature. When high initial column temperature was used, tailing of the peaks appeared. Great difference between DB! and.DB5 columns in the range of the initial column temperature in which symmetrical.peaks of PAHs can be obtained is observed. Wider ranges were shown using DB5 column. Resolution of the closely-eluted PAHs was also affected by the initial column temperature depending on the stationary phase employed. In the case of DB5, only the earlyeluted PAHs were affected; whereas, with DB1, all PAHs were affected. An analytical procedure utilizing solid phase extraction with bonded phase silica (C8) cartridges combined with GC/MS was developed to analyze PAHs in water as an alternative method to those based on the extraction with organic solvent. This simple procedure involved passing a 50 ml of spiked water sample through C8 bonded phase silica cartridges at 10 ml/min, dried by passing a gentle flow of nitrogen at 20 ml/min for 30 sec, and eluting the trapped PAHs with 500 Jll of p-xylene at 0.3 ml/min. The recoveries of PAHs were greater than 80%, with less than 10% relative standard deviations of nine determinations. No major contaminants were present that could interfere with the recognition of PAHs. It was also found that these bonded phase silica cartridges can be re-used for the extraction of PAHs from water.

Polytypism and Silicon carbide : a solid state nuclear magnetic resonance study

A survey of predominantly industrial silicon carbide has been carried out using Magic Angle Spinning nuclear magnetic resonance (MAS nmr); a solid state technique. Three silicon carbide polytypes were studied; 3C, 6H, and 15R. The 13C and 29 Si MAS nmr spectra of the bulk SiC sample was identified on the basis of silicon (carbon) site type in the d iff ere n t pol Y t Y pes • Out to 5.00 A fro mac en t r a lsi 1 i con (0 r carbon) atom four types of sites were characterized using symmetry based calculations. This method of polytype analysis was also considered, in the prelminary stages, for applications with other polytypic material; CdBr 2 , CdI 2 , and PbI 2 " In an attempt to understand the minor components of silicon carbide, such as its surface, some samples were hydrofluoric acid washed and heated to extreme temperatures. Basically, an HF removable species which absorbs at -110 ppm (Si0 2 ) in the 29 Si MAS nmr spectrum is found in silicon carbide after heating. Other unidentified peaks observed at short recycle delays in some 29 Si MAS nmr spectra are considered to be impurities that may be within the lattice. These components comprise less than 5% of the observable silicon. A Tl study was carried out for 29 Si nuclei in a 3C ii polytype sample, using the Driven Equilibrium Single-Pulse Observation of T1 (DESPOT) technique. It appears as though there are a number of nuclei that have the same chemical shift but different T1 relaxation times. The T1 values range from 30 seconds to 11 minutes. Caution has to be kept when interpreting these results because this is the first time that DESPOT has been used for solid samples and it is not likely in full working order. MAS nmr indicates that the 13C and 29 Si ~sotropic chemical shifts of silicon carbide appear to have a reciprocal type of relationship_ Single crystal nmr analysis of a 6H sample is accordance with this finding when only the resultant isotropic shift is considered. However, single crystal nmr also shows that the actual response of the silicon and carbon nuclear environment to the applied magnetic field at various angles is not at all reciprocal. Such results show that much more single crystal nmr work is required to determine the actual behavior of the local magnetic environment of the SiC nuclei.

Preparing to teach : learning from an exploration of teachers' experiences of teaching in classrooms of difference

This qualitative study explores practicing teachers' experiences of teaching in classrooms of diversity, that is, classrooms where students represent a variety of differences including race, culture, ethnicity, and class. More specifically, this study investigates the types of curricular and pedagogical practices teachers employ in their classrooms. This study attempts to make a contribution to the scholarship of critical pedagogy by drawing upon the works of critical pedagogues to make sense of participants' descriptions oftheir curricular and pedagogical practices. Four participants were involved in this study. Participants were elementary teachers in classrooms of difference in Ontario who contributed the primary sources of data by engaging in 2 individual interviews. Additional sources of data included a focus group meeting that 2 ofthe participants were able to attend, school board curriculum resource documents assisting teachers in teaching critically, as well as a research journal which the researcher kept throughout the study. The scholarship of critical pedagogy (Ellsworth, 1992; Giroux, 1993; McLaren, 1989) informs the analysis of participants' descriptions of their teaching experiences. Many of the participants did not engage in a practice of critical pedagogy. This study explores some of the challenges and possibilities of using critical pedagogy to create spaces in classrooms where teachers can build connections between the curriculum mandated by the government and the multiple identities and experiences that students bring into the classroom. This study concludes with a discussion on what teachers need to know to be able to begin creating equitable and educational experiences in classrooms of difference.

Solid state NMR chemical shifts as an alternative to diffraction data in the determination of SIC polytypic structures

Silicon carbide, which has many polytypic modifications of a very simple and very symmetric structure, is an excellent model system for exploring, the relationship between chemical shift, long-range dipolar shielding, and crystal structure in network solids. A simple McConnell equation treatment of bond anisotropy effects in a poly type predicts chemical shifts for silicon and carbon sites which agree well with the experiment, provided that contributions from bonds up to 100 A are included in the calculation. The calculated chemical shifts depend on three factors: the layer stacking sequence, electrical centre of gravity, and the spacings between silicon and carbon layers. The assignment of peaks to lattice sites is proved possible for three polytypes (6H, 15R, and 3C). The fact that the calculated chemical shifts are very sensitive to layer spacings provides us a potential way to detennine and refine a crystal structure. In this work, the layer spacings of 6H SiC have been calculated and are within X-ray standard deviations. Under this premise, the layer spacings of 15R have been detennined. 29Si and 13C single crystal nmr studies of 6H SiC polytype indicate that all silicons and carbons are magnetically anisotropic. The relationship between a magnetic shielding tensor component and layer spacings has been derived. The comparisons between experimental and semi-empirical chemical shielding tensor components indicate that the paramagnetic shielding of silicon should be included in the single crystal chemical shift calculation.

(A) Optimization of solid body phase synthesis of RNA using the Cpep chemistry. (B) Synthesis of BODIPY labeled oligonucleotides

(A) Solid phase synthesis of oligonucleotides are well documented and are extensively studied as the demands continue to rise with the development of antisense, anti-gene, RNA interference, and aptamers. Although synthesis of RNA sequences faces many challenges, most notably the choice of the 2' -hydroxy protecting group, modified 2' -O-Cpep protected ribonucleotides were synthesized as alternitive building blocks. Altering phosphitylation procedures to incorporate 3' -N,N-diethyl phosphoramidites enhanced the overall reactivity, thus, increased the coupling efficiency without loss of integrety. Furthermore, technical optimizations of solid phase synthesis cycles were carried out to allow for successful synthesis of a homo UIO sequences with a stepwise coupling efficiency reaching 99% and a final yield of 91 %. (B) Over the past few decades, dipyrrometheneboron difluoride (BODIPY) has gained recognition as one of the most versatile fluorophores. Currently, BODIPY labeling of oligonucleotides are carried out post-synthetically and to date, there lacks a method that allows for direct incorporation of BODIPY into oligonucleotides during solid phase synthesis. Therefore, synthesis of BODIPY derived phosphoramidites will provide an alternative method in obtaining fluorescently labelled oligonucleotides. A method for the synthesis and incorporation of the BODIPY analogues into oligonucleotides by phosphoramidite chemistry-based solid phase DNA synthesis is reported here. Using this approach, BODIPY-labeled TlO homopolymer and ISIS 5132 were successfully synthesized.

Poverty and Education: Preparing Teacher Candidates for Economically Diverse Classroom Environments

The poverty rate in Ontario affects approximately 1 in 6 children. Consequently, many classrooms in the province include students who come from poverty, and teachers are faced with the challenge of providing an equitable education to students who come from economically diverse backgrounds. Because student poverty in our education system is so prevalent, this challenge exists also for teacher candidates who enter the education system and complete their practicums in classrooms that often include students from impoverished backgrounds. This project examined issues of poverty and education and developed a workshop to assist teacher candidates to develop knowledge in this area. The project combined existing pedagogical approaches with participants’ recommendations and developed a workshop that could be delivered to Faculty of Education students. The workshop addresses poverty, the relationship between poverty and education, student academic achievement and well-being, and the relationship between school and home. The goal and hope of the workshop is that teacher candidates will be better prepared when working in economically diverse school environments.

Becoming Peer Health Leaders: A Mixed-Methods Evaluation of a Youth Leadership Camp Preparing Peer Leaders for Participation in a Health Promotion Initiative.

Youth are critical partners in health promotion, but the process of training young people to become meaningfully involved is challenging. This mixed-methods evaluation considered the impact of a leadership camp in preparing 42 grade seven students to become peer health leaders in a ‘heart health’ initiative. The experiences of participants and their sense of agency were explored. Data were collected from pre and post camp surveys, focus groups, student journals and researcher observations. Findings indicate that relationships with peers and adults were key to agency development, and participants appeared to broaden their perspectives on the meanings of ‘health’ and ‘leadership.’ Significant changes on two sub-scales of the Harter Perceived Competence Scale for Children were also found. Suggestions for practice and further research are provided.

Preparing Students with ASD for Inclusive Classrooms: A Case Study of Giant Steps

Giant Steps is a therapeutic school for children with Autism Spectrum Disorder (ASD) founded in 1995 by a group of parents who felt that the public school system was not fully able to meet the needs of their children. While the education system has progressed through the years to offer all students with access to public education, many educators still are not adequately prepared to provide inclusive learning environments for students with ASD. Given the prevalence of ASD in southern Ontario (1 in every 42 boys and 1 in every 189 girls), research on ASD and inclusive practices is both vital and timely. The purpose of this qualitative case study is to understand how the Giant Steps program prepares and transitions students with ASD for inclusive classrooms. Data was collected through two rounds of in-depth interviews, and was subsequently analyzed and interpreted into research findings that are presented through three major themes (i.e., unique program aspects, holistic approach, inclusion not integration). Collectively, the themes provide insights about how students at Giant Steps are prepared for inclusion, as well as how different stakeholders within the Giant Steps program perceive inclusion and their role in preparing students for inclusive classrooms.