Water-power at Niagara Falls to be successfully utilized : its objects, facilities and resources, inducements for manufacturers, etc. /

The lithograph, "General view of lands, tunnel and docks of Niagara River Hydraulic Tunnel, Power and Sewer Company," called for p. [4] in the Index, has been removed and encapsulated, and is shelved separately.

Statistics of Manufacturers for the year 1905 - Canadian Niagara Power Company

A census form for the year 1905. The form was approved by the Governor General in Council January 22, 1906.

Printed blank sent to Mr. B. Allen from the Clough Stone Co. of North Amherst, Ohio, Miners and Manufacturers of Grindstones and Building Stone

Printed blank sent to Mr. B. Allen from the Clough Stone Co. of North Amherst, Ohio, Miners and Manufacturers of Grindstones and Building Stone regarding shipping. This is signed by Mr. Davis, July 19, 1876.

Receipt from John Henderson and Co., Manufacturers of Hats, Caps and Furs and dealers in Indian Curiosities

Receipt from John Henderson and Co., Manufacturers of Hats, Caps and Furs and dealers in Indian Curiosities, Montreal for furs and buttons, Oct. 13, 1887.

Receipt from Alex Cruickshank and Sons, Manufacturers of Hosiery, Edinburgh, Scotland

Receipt from Alex Cruickshank and Sons, Manufacturers of Hosiery, Edinburgh, Scotland for socks and gloves, July 1847.

Investigation of the composition of linear alkylbenzenes with emphasis on the identification and quantitation of some trace compounds using GS/MS system in both electron impact and chemical ionization modes

Linear alkylbenzenes, LAB, formed by the Alel3 or HF catalyzed alkylation of benzene are common raw materials for surfactant manufacture. Normally they are sulphonated using S03 or oleum to give the corresponding linear alkylbenzene sulphonates In >95 % yield. As concern has grown about the environmental impact of surfactants,' questions have been raised about the trace levels of unreacted raw materials, linear alkylbenzenes and minor impurities present in them. With the advent of modem analytical instruments and techniques, namely GCIMS, the opportunity has arisen to identify the exact nature of these impurities and to determine the actual levels of them present in the commercial linear ,alkylbenzenes. The object of the proposed study was to separate, identify and quantify major and minor components (1-10%) in commercial linear alkylbenzenes. The focus of this study was on the structure elucidation and determination of impurities and on the qualitative determination of them in all analyzed linear alkylbenzene samples. A gas chromatography/mass spectrometry, (GCIMS) study was performed o~ five samples from the same manufacturer (different production dates) and then it was followed by the analyses of ten commercial linear alkylbenzenes from four different suppliers. All the major components, namely linear alkylbenzene isomers, followed the same elution pattern with the 2-phenyl isomer eluting last. The individual isomers were identified by interpretation of their electron impact and chemical ionization mass spectra. The percent isomer distribution was found to be different from sample to sample. Average molecular weights were calculated using two methods, GC and GCIMS, and compared with the results reported on the Certificate of Analyses (C.O.A.) provided by the manufacturers of commercial linear alkylbenzenes. The GC results in most cases agreed with the reported values, whereas GC/MS results were significantly lower, between 0.41 and 3.29 amu. The minor components, impurities such as branched alkylbenzenes and dialkyltetralins eluted according to their molecular weights. Their fragmentation patterns were studied using electron impact ionization mode and their molecular weight ions confirmed by a 'soft ionization technique', chemical ionization. The level of impurities present i~ the analyzed commercial linear alkylbenzenes was expressed as the percent of the total sample weight, as well as, in mg/g. The percent of impurities was observed to vary between 4.5 % and 16.8 % with the highest being in sample "I". Quantitation (mg/g) of impurities such as branched alkylbenzenes and dialkyltetralins was done using cis/trans-l,4,6,7-tetramethyltetralin as an internal standard. Samples were analyzed using .GC/MS system operating under full scan and single ion monitoring data acquisition modes. The latter data acquisition mode, which offers higher sensitivity, was used to analyze all samples under investigation for presence of linear dialkyltetralins. Dialkyltetralins were reported quantitatively, whereas branched alkylbenzenes were reported semi-qualitatively. The GC/MS method that was developed during the course of this study allowed identification of some other trace impurities present in commercial LABs. Compounds such as non-linear dialkyltetralins, dialkylindanes, diphenylalkanes and alkylnaphthalenes were identified but their detailed structure elucidation and the quantitation was beyond the scope of this study. However, further investigation of these compounds will be the subject of a future study.

Surface effect ferromagnetism in pure and reduced strontium titanate

A room temperature ferromagnetic hysteresis is observed in single crystal strontium titanate substrates as purchased from several manufacturers. It was found that polishing all sides of the substrates removed this observed hysteresis, suggesting that the origin of the ferromagnetic behavior resides on the surface of the substrates. X-ray diffraction and energy dispersive x-ray spectra were measured however they were unable to detect any impurity phases. In similar semiconducting oxides it was previously suggested that ferromagnetism could originate in oxygen vacancies or from disorder within the single crystal. To this end substrates were annealed in both air and vacuum in a range of temperatures (600°C to 1100°G) to both create bulk oxygen vacancies and to heal surface damage. Annealing in vacuum was found to create a measureable number of oxygen vacancies however their creation could not be correlated to the ferromagnetic signal of the substrate. Annealing in air was found to effect the remnant moment of the substrate as well as the width of the x-ray diffraction peaks on the unpolished face, weakly suggesting a relation between surface based disorder and ferromagnetism. Argon ion bombardment was employed to create a layer of surface disorder in the polished crystal, however it was not found to induce ferromagnetism. It was found that acid etching was sufficient to remove the ferromagnetism from as purchased samples and similarly simulated handling with stainless steel tweezers was sufficient to re-create the ferromagnetism. It is suggested that the origin of this ferromagnetism in SrTi03 is surface contaminants (mainly iron).

Taylor & Bates Brewery & Vinegar Manufactory - Vignette

A vignette of Taylor and Bate's Brewery and Manufactory, St. Catharines.. "Manufacturers of Taylor's Celebrated Amber Ale, Porter, also, White Wine Vinegar, Dealers in Malt, Hops, Barley, &c. &c." The names listed are James Taylor and Thomas B. Bate.

Fur Council of Canada records

The Fur Council of Canada is an association that represents people working in all sectors of the Canadian fur trade, including trappers, processors, designers, manufacturers and retail furriers. The association aims to “promote, defend and enhance the professional, economic, social and moral interests of our members”. The Council supports fair trading practices for the benefit of producers and artisans; the responsible use of renewable resources; partnerships between the fur trade and other sectors of the Canadian and international fashion industry; and innovative use of fur by young designers.

Various Cards

1. Invitation and program to the Merritton Hose Co. No. 1 Grand Masquerade Ball and Supper. The invitation is for Mrs. J. Wilson. Ladies are by invitation only. Ladies without masks are charged 10 cents. The supper was held at the Union Hall and the dance was held in the Merritton Town Hall. Phalen’s Full Orchestra was providing the music, Feb. 16, 1900. 2. Business card of Long’s Hotel of Niagara. Rooms were $1.50 per day and the proprietor was Wm. Long, n.d. 3. Business card of Niagara Tannery of Niagara, Ontario. Blake and Burk were the proprietors. They were wholesale manufacturers of oak tanned, hose, belting and harness leather, n.d. 4. Business card of James B. Secord of Niagara, Ontario. His office was in the town hall. He was a notary public, conveyancer, clerk of first division court and Commissioner. He also had money to loan, n.d.

The contribution of skate blade properties to skating speed

The purpose of the study was to investigate the relative contribution of skate blade properties to on-ice skating speed. Thirty-two male ice hockey players (mean age = 19±2.65 yrs.) representing the Ontario Minor Hockey Association (OMHA; Midget AAA and Junior), Canadian Inter University Sport (CIS: Varsity), Ontario hockey league (OHL) and East Coast Hockey League (ECHL), and the playing positions of forwards (n=18) and defense (n=14) were recruited to participate. Skate related equipment worn by the players for the purpose of the research was documented and revealed that 80% of the players wore Bauer skates, Tuuk blade holders and LS2 skate blades. Subjects completed a battery of eight on-ice skating drills used to measure and compare two aspects of skating speed; acceleration [T1(s)] and total time to complete each drill [TT(s)] while skating on three skate blade conditions. The drills represented skills used in the game of hockey, both in isolation (e.g., forward skating, backward skating, stops and starts, and cornering) and in sequence to simulate the combination of skills used in a shift of game play. The three blade conditions consisted of (i) baseline, represented by the blades worn by the player throughout their current season of play; (ii) experimental blades (EB), represented by brand name experimental blades with manufacturers radius of contour and a standardized radius of hollow; and (iii) customized experimental blades (CEB), represented by the same brand name experimental blades sharpened to the players’ preference as identified in the baseline condition. No significant differences were found in acceleration time [T1(s)] or total time to complete [TT(s)] the isolated drills across blade conditions; however significant differences were revealed in both T1(s) and TT(s) measured during the execution of the sequenced drill across blade conditions. A iii Bonferroni post hoc test revealed that players skated significantly faster when skating on the CEB condition compared to the baseline condition (p≤.05). A questionnaire assessing subjects perceived comfort, confidence and effort expended while skating on the experimental blades revealed that players were significantly more comfortable when skating on the CEB versus the EB condition (p≤.05). Outcomes of the study provide evidence to suggest that the experimental skate blades customized with the players preferred blade sharpening characteristics results in faster skating speed in a combination drill representing skills performed in gameplay.

Letter and envelope addressed to S.D. Woodruff from the office of T.B. Stewart and Co. of New York

Letter and envelope addressed to S.D. Woodruff from the office of T.B. Stewart and Co. of New York, Manufacturers of Mantles, Marble and Wood Mantels. The letter states that the heater and grates have been shipped, July 14, 1876.

Letter to S.D. Woodruff from George C. Flint and Co.

Letter to S.D. Woodruff from George C. Flint and Co., Upholsterers and Furniture Manufacturers of New York regarding items such as mantle glass, cornices and fabrics. They have enclosed a handwritten price list with this letter (4 pages, handwritten), Sept. 13, 1876.

Receipt from T.B. Stewart and Co. of New York

Receipt from T.B. Stewart and Co. of New York, manufacturers of Slate and Marble Mantels regarding payment on mantle, March 6, 1876.

Receipt from McIntyre and Son of St. Catharines

Receipt from McIntyre and Son of St. Catharines, Manufacturers and Dealers in Furniture for a newel post, n.d.