Armourstone revetments : will standard design criteria prevent failure? /

Bank stabilization structures are used to prevent the loss of valuable land within the urban environment and the decision for the type of structure used depends on the properties of the stream. In the urban areas of Southern Ontario there is a preference for the use of armourstone blocks as bank stabilization. The armourstone revetment is a free standing stone structure with large blocks of stone layered vertically and offset from one another. During fieldwork at Forty Mile Creek in Grimsby, Ontario armourstone failure was identified by the removal of two stones within one column from the wall. Since the footer stones were still in place, toe scour was eliminated as a cause of failure. Through theoretical, field, and experimental work the process of suction has been identified as a mode of failure for the armourstone wall and the process of suction works similarly to quarrying large blocks of rock off bedrock streambeds. The theory of lateral suction has previously not been taken into consideration for the design of these walls. The physical and hydraulic evidence found in the field and studied during experimental work indicate that the armourstone wall is vulnerable to the process of suction. The forces exerted by the flow and the resistance of the block determine the stability of the armourstone block within the wall. The design of the armourstone wall, high surface velocities, and short pulses of faster flowing water within the profile could contribute to armourstone failure by providing the forces needed for suction to occur, therefore adjustments to the design of the wall should be made in order to limit the effect.

Analysis of the late correspondence between our administration and Great Britain & France, with an attempt to show what are the real causes of the failure of the negotiation.

Ten pieces originally published in the Columbian Centinel. A later edition with imprint New York, Printed for E. Sargeant, 1809, contains two additional pieces.

Determinants of bankruptcy protection duration for Canadian firms

The present thesis examines the determinants of the bankruptcy protection duration for Canadian firms. Using a sample of Canadian firms that filed for bankruptcy protection between the calendar years 1992 and 2009, we fmd that the firm age, the industry adjusted operating margin, the default spread, the industrial production growth rate or the interest rate are influential factors on determining the length of the protection period. Older firms tend to stay longer under protection from creditors. As older firms have more complicated structures and issues to settle, the risk of exiting soon the protection (the hazard rate) is small. We also find that firms that perform better than their benchmark as measured by the industry they belong to, tend to leave quickly the bankruptcy protection state. We conclude that the fate of relatively successful companies is determined faster. Moreover, we report that it takes less time to achieve a final solution to firms under bankrupt~y when the default spread is low or when the appetite for risk is high. Conversely, during periods of high default spreads and flight for quality, it takes longer time to resolve the bankruptcy issue. This last finding may suggest that troubled firms should place themselves under protection when spreads are low. However, this ignores the endogeneity issue: high default spread may cause and incidentally reflect higher bankruptcy rates in the economy. Indeed, we find that bankruptcy protection is longer during economic downturns. We explain this relation by the natural increase in default rate among firms (and individuals) during economically troubled times. Default spreads are usually larger during these harsh periods as investors become more risk averse since their wealth shrinks. Using a Log-logistic hazard model, we also fmd that firms that file under the Companies' Creditors Arrangement Act (CCAA) protection spend longer time restructuring than firms that filed under the Bankruptcy and Insolvency Act (BIA). As BIA is more statutory and less flexible, solutions can be reached faster by court orders.

Using a Bayesian model for bankruptcy prediction : a comparative approach

The purpose of this study is to examine the impact of the choice of cut-off points, sampling procedures, and the business cycle on the accuracy of bankruptcy prediction models. Misclassification can result in erroneous predictions leading to prohibitive costs to firms, investors and the economy. To test the impact of the choice of cut-off points and sampling procedures, three bankruptcy prediction models are assessed- Bayesian, Hazard and Mixed Logit. A salient feature of the study is that the analysis includes both parametric and nonparametric bankruptcy prediction models. A sample of firms from Lynn M. LoPucki Bankruptcy Research Database in the U. S. was used to evaluate the relative performance of the three models. The choice of a cut-off point and sampling procedures were found to affect the rankings of the various models. In general, the results indicate that the empirical cut-off point estimated from the training sample resulted in the lowest misclassification costs for all three models. Although the Hazard and Mixed Logit models resulted in lower costs of misclassification in the randomly selected samples, the Mixed Logit model did not perform as well across varying business-cycles. In general, the Hazard model has the highest predictive power. However, the higher predictive power of the Bayesian model, when the ratio of the cost of Type I errors to the cost of Type II errors is high, is relatively consistent across all sampling methods. Such an advantage of the Bayesian model may make it more attractive in the current economic environment. This study extends recent research comparing the performance of bankruptcy prediction models by identifying under what conditions a model performs better. It also allays a range of user groups, including auditors, shareholders, employees, suppliers, rating agencies, and creditors' concerns with respect to assessing failure risk.

CEO Compensation, Compensation Risk, and Corporate Governance: Evidence from Technology Firms

Literature suggests that CEOs of technology firms earn higher pay than CEOs of non-technology firms. I investigate whether compensation risk explains the difference in compensation between technology firms and non-technology firms. Controlling for firm size and performance, I find that CEOs in technology firms have higher pay, but also have much higher compensation risk compared to non-technology firms. Compensation risk explains the major part of the difference in CEO pay. My study is consistent with the labor market economics view that CEOs earn competitive risk-adjusted total compensation.

Drivers of Local Firms’ Focus on Internal R&D in Emerging Economies and Their International Performance

Grounded on the resource-based view of the firm, the study of this thesis investigates the effect of four internal and external factors – engineer intensity, location, affiliation with the government, government funding – on Chinese firms’ decision to either invest in internal R&D activities or external R&D and the effect of this decision on the firms’ international market success. In addition, the moderating role of the presence of foreign firms in China is examined. To understand these relationships, the thesis’ theorization focuses on the issue of how firms can combine optimally the two options – “internal R&D” and “external R&D”. In this regard I juxtapose internal R&D and external R&D and compare their advantages and disadvantages. To test my model, I apply panel data from the Annual Industrial Survey Database provided by the Chinese National Bureau of Statistics. My results show that three of the four investigated factors affect Chinese firms’ resource allocation decisions; and effective resource allocation decisions lead effectively to international market success, strengthened by the presence of foreign firms in China. Moreover the findings bear several theoretical and managerial contributions. First I propose the last dimension of the “VRIO framework” – “organization” – as an endogenous component of the VRIO framework, as my study investigated how firms can effectively combine resources to generate a competitive advantage in terms of international market success. Previous academic literature so far focused on examining whether internal and external R&D are complements or substitutes. My study fills a gap in the literature by investigating the determinants of the efficient combination of the two strategies and the outcome of the combination. One of the managerial implications is that Chinese firms can learn from foreign companies that are present in China.