An HPLC method for simultaneous determination of residual benomyl and MBC on apple foliage without cleanup

A simple High Performance Liquid Chromatograph (HPLC) method has been developed to identify benamyl (methyl 1- (butylcarbamoyl)-2-benzimidazole carbamate) and MBC (methyl 2-benzimidazole carbamat~ residues on apple leaves without cleanup. Sample leaves are freeze dried in a Mason jar and residues are then extracted by tumbling them in chloroform containing 5,000 microgram per milliliter of n-propyl isocyanate (PIC) at 10 C. To the extract, n-butyl isocyanate (BIC) was added at 5,000 microgram per milliliter and 20 microliter of this mixture injected onto the HPLC system. Separation is accomplished by the use of a Brownlee LiChrosorb silica gel column with a guard column and' operated with a mixed mobile phase consisting of chloroform and hexane (4:1) saturated with water. MBC, a degradation product of benomyl is identified if present as methyl l-(npropyl carbamoyl)-2-benzimidazole carbamate (MBC-n-PIC). Both benomyl and MBC-n-PIC can be detected with aKUltraviolet (UV) detector (280nm) at a concentration as low as 0.2 microgram per milliliter in apple leaves. The fate of benomyl on apple foliage after spray application of benomyl (Ben late 50 per cent wettable powder) was investigated by the method thus described. Benomyl quickly dissipated during the first 3-7 days, but the dissipatio'n sltowed down thereafter. In contrast, the concentration of MBC in leaves gradually increased after repeated applications of Benlate.

Investigations into the extraction and the determination of polycyclic aromatic hydrocarbons (PAHs) from water by solid-phase extraction and capillary gas chromatography/ mass spectrometry

Factors affecting the detennination of PAHs by capillary GC/MS were studied. The effect of the initial column temperature and the injection solvent on the peak areas and heights of sixteen PAHs, considered as priority pollutants, USillg crosslinked methyl silicone (DB!) and 5% diphenyl, 94% dimethyl, 1% vinyl polysiloxane (DBS) columns was examined. The possibility of using high boiling point alcohols especially butanol, pentanol, cyclopentanol, and hexanol as injection solvents was investigated. Studies were carried out to optimize the initial column temperature for each of the alcohols. It was found that the optimum initial column temperature is dependent on the solvent employed. The peak areas and heights of the PAHs are enhanced when the initial column temperature is 10-20 c above the boiling point of the solvent using DB5 column, and the same or 10 C above the boiling point of the solvent using DB1 column. Comparing the peak signals of the PAHs using the alcohols, p-xylene, n-octane, and nonane as injection solvents, hexanol gave the greatest peak areas and heights of the PAHs particularly the late-eluted peaks. The detection limits were at low pg levels, ranging from 6.0 pg for fluorene t9 83.6 pg for benzo(a)pyrene. The effect of the initial column temperature on the peak shape and the separation efficiency of the PARs was also studied using DB1 and DB5 columns. Fronting or splitting of the peaks was obseIVed at very low initial column temperature. When high initial column temperature was used, tailing of the peaks appeared. Great difference between DB! and.DB5 columns in the range of the initial column temperature in which symmetrical.peaks of PAHs can be obtained is observed. Wider ranges were shown using DB5 column. Resolution of the closely-eluted PAHs was also affected by the initial column temperature depending on the stationary phase employed. In the case of DB5, only the earlyeluted PAHs were affected; whereas, with DB1, all PAHs were affected. An analytical procedure utilizing solid phase extraction with bonded phase silica (C8) cartridges combined with GC/MS was developed to analyze PAHs in water as an alternative method to those based on the extraction with organic solvent. This simple procedure involved passing a 50 ml of spiked water sample through C8 bonded phase silica cartridges at 10 ml/min, dried by passing a gentle flow of nitrogen at 20 ml/min for 30 sec, and eluting the trapped PAHs with 500 Jll of p-xylene at 0.3 ml/min. The recoveries of PAHs were greater than 80%, with less than 10% relative standard deviations of nine determinations. No major contaminants were present that could interfere with the recognition of PAHs. It was also found that these bonded phase silica cartridges can be re-used for the extraction of PAHs from water.

The importance of hydrogen bonding in the alkylation of phenols

Hydrogen bond assisted alkylation of phenols is compared with the classical base assisted reactions. The influence of solvents on the fluoride assisted reactions is discussed,· with emphasis on the localization of hydrogen bond charge density. Polar aprotic solvents such as DMF favour a-alkylation, and nonpolar aprotic solvents such as toluene favourC-alkylation of phenol. For more reactive and soluble fluorides, such as tetrabu~ylammoniumfluoride, the polar aprotic solvent favours a-alkylation and nonpolar aprotic solvent favours fluorination. Freeze-dried potassium fluoride is a better catalytic agent in hydrogen bond assisted alkylation reactions of phenol than the oven-dried fluoride. The presence of water in the alkylation reactions reduces the expected yield drastically. The tolerance of the reaction to water has also been studied. The use ofa phase transfer catalyst such as tetrabutylammonium bromide in the alkylation reactions of phenol in the presence of potassium fluoride is very effective under anhydrous conditions. Sterically hindered phenols such as 2,6-ditertiarybutyl-4-methyl phenol could not be alkylated even by using the more reactive fluorides, such as tetrabutylammonium fluoride in either polar or nonpolar aprotic solvents. Attempts were also made to alkylate phenols in the presence of triphenylphosphine oxide.

X-ray diffraction studies of muscle : observations on the anterior byssus retractor muscle of Mytilus edulis and the insect flight muscle from Sarcophaga bullata

The interfilament spacing of the anterior byssus retractor muscle from Mytilus edulis was studied as the muscle was extended. It was found that variations in this spacing were very small and consistent with the hypothesis that the interfilament spacing was independent of the extension of the muscle. It was observed that the interfilament spacing was dependent on the osmolarity of the bathing medium. In concentrated solutions of the artificial seawater, the interfilament spacing decreased; while in dilute solutions of artificial seawater, it was observed that the interfilament spacing was increasing. X-ray diffraction patterns were obtained from fresh, and glutaraldehyde fixed, specimens of insect flight muscle from Sarcophaga bullata. There patterns were in general agreement with previous X-ray diffraction studies of insect flight muscle. A reflexion G at 93A was observed and interpreted as arising from diffraction in the mitochondria. Specimens of dried insect flight muscle produced a diffraction pattern consisting of arc and ring reflexions. This was interpreted as suggesting an ordered arrangement of cristae, in the mitochondria from these muscles.

A study of selected factors influencing the reproductive performance of the common tern (Sterna hirundo) at Port Colborne, Ontario in 1973 and 1974

Several study areas were investigated at two Port Colborne terneries during the summers of 1973 and 1974 in an attempt to determine the influence of clutch size, time of clutch initiation, position in the colony, proximity to Ring-billed Gulls, vegetation and nesting substrate on the reproductive performance of the Common Tern. Hatching success and reproductive success (the number of chicks fledged per egg laid) were generally higher for 3-egg than 2-egg clutches but fledging (the number of chicks fledged per egg hatched) success was usually independant of clutch size. Hatching, fledging and reproductive success declined as a function of time of clutch initiation. Mean clutch sizes also generally declined as a function of time. Nests located in the center of the colony exhibited higher fledging success than those on the periphery. Rock-based clutches had a lower hatching success than clutches initiated on sand or dried vegetation. Reproductive performance did not appear to be related to proximity to Ring-billed Gulls or vegetation within the study area.

The analysis of Metarhizium robertsii potential as endophytic plant root coloniser, plant growth enhancer and antagonist to bean root pathogen Fusarium solani f. sp. phaseolis.

The soil-inhabiting insect-pathogenic fungus Metarhizium robertsii also colonizes plant roots endophytically, thus showing potential as a plant symbiont. M robertsii is not randomly distributed in soils but preferentially associates with the plant rhizosphere when applied in agricultural settings. Root surface and endophytic colonization of switchgrass (Panicum virgatum) and haricot beans (Phaseolus vulgaris) by M robertsii were examined after inoculation with fungal conidia. Light and confocal microscopies were used to ascertain this rhizosphere association. Root lengths, root hair density and emergence of lateral roots were also measured. Initially, M robertsii conidia adhered to, germinated on, and colonized, roots. Furthermore, plant roots treated with Metarhizium grew faster and the density of plant root hairs increased when compared with control plants. The onset of plant root hair proliferation was initiated before germination of M robertsii on the root (within 1-2 days). Plants inoculated with M robertsii AMAD2 (plant adhesin gene) took significantly longer to show root hair proliferation than the wild type. Cell free extracts of M robertsii did not stimulate root hair proliferation. Longer term (60 days) associations showed that M robertsii endophytically colonized individual cortical cells within bean roots. Metarhizium appeared as an amorphous mycelial aggregate within root cortical cells as well as between the intercellular spaces with no apparent damage to the plant. These results suggested that not only is M robertsii rhizosphere competent but displays a beneficial endophytic association with plant roots that results in the proliferation of root hairs. The biocontrol of bean (Phaseolis vulgaris) root rot fungus Fusarium solani f. sp. phaseolis by Metarhizium robertsii was investigated in vitro and in vivo. Dual cultures on Petri dishes showed antagonism of M robertsii against F. solani. A relative inhibition of ca. 60% of F. solani growth was observed in these assays. Cell free culture filtrates of M robertsii inhibited the germination of F. solani conidia by 83% and the inhibitory metabolite was heat stable. Beans plants colonized by M robertsii then exposed to F. solani showed healthier plant profiles and lower disease indices compared to plants not colonized by M robertsii. These results suggested that the insect pathogenic/endophytic fungus M robertsii could also be utilized as a biocontrol agent against certain plant pathogens occurring in the rhizosphere.

Methoxypyrazine removal in grape juice: Development of a removal system using odorant and pheromone binding proteins coupled with bentonite fining

Multicoloured Asian Lady Beetles (MALB) and 7-spot Lady Beetles that infect vineyards can secrete alkyl-methoxypyrazines when they are processed with the grapes, resulting in wines containing a taint. The main methoxypyrazine associated with this taint is 3-isopropyl-2-methoxypyrazine (IPMP). The wines are described as having aroma and flavours of peanut butter, peanut shells, asparagus and earthy which collectively, have become known as “ladybug taint”. To date, there are no known fining agents used commercially added to juice or wine that are effective in removing this taint. The goal of this project was to use previously identified proteins with an ability to bind to methoxypyrazines at low pH, and subsequently develop a binding assay to test the ability of these proteins to bind to and remove methoxypyrazines from grape juice. The piglet odorant binding protein (plOBP) and mouse major urinary protein (mMUP) were identified, cloned and expressed in the Pichia pastoris expression system. Protein expression was induced using methanol and the proteins were subsequently purified from the induction media using anion exchange chromatography. The purified proteins were freeze-dried and rehydrated prior to use in the methoxypyrazine removal assay. The expression and purification system resulted in yields of approximately 78% of purified plOBP and 62% of purified mMUP from expression to rehydration. Purified protein values were 87 mg of purified plOPB per litre of induction media and 19 mg of purified mMUP per litre of induction medium. In order to test the ability of the protein to bind to the MPs, an MP removal assay was developed. In the assay, the purified protein is incubated with either IPMP or 3-isobutyl-2-methoxypyrazine (IBMP) for two hours in either buffer or grape juice. Bentonite is then used to capture the protein-MP complex and the bentonite-protein-MP complex is then removed from solution by filtration. Residual MP is measured in solution following the MP removal assay and compared to that in the starting solution by Gas Chromatography Mass Spectrometry (GC/MS). GC/MS results indicated that the mMUP was capable of removing IBMP and IPMP from 300 ng/L in buffer pH 4.0, buffer pH 3.5 and Riesling Juice pH 3.5 down to the limit of quantification of the instrument, which is 6ng/L and 2ng/L for IBMP and IPMP, respectively. The results for the plOBP showed that although it could remove some IBMP, it was only approximately 50-70 ng/L more than bentonite treatment followed by filtration, resulting in approximately 100 ng/L of the MPs being left in solution. pIOBP was not able to remove IPMP in buffer pH 3.5 using this system above that removed by bentonite alone. As well, the pIOBP was not able to remove any additional MPs from Chardonnay juice pH 3.5 above that already removed by the bentonite and filtration alone. The mouse MUP was shown to be a better candidate protein for removal of MPs from juice using this system.

Tin box "Waldmeister zur Bowle, Woodruff"

Tin box with the title “Waldmeister zur Bowle, Woodruff” on it, 10 cm x 16 cm. The box is from Julius Schade and Co., German Army and Navy Contractors, Leipzig-Lindenau, Germany. This box contains dried woodruff leaves. Accompanying this box of woodruff is a handwritten recipe for woodruff brew, n.d.