Investigation into the determination of arsenic by direct current plasma atomic emission spectrometer

Improvements have been made on the currently available hydride generator system manufactured by SpectraMetrics Incorporated, because the system was found to be unsatisfactory with respect to the following: 1. the drying agent, anhydrous calcium chloride, 2. the special sample tube, 3. the direction of argon flow through the Buchner funnel when it came to dealing with real sample, that is, with reference only to aqueous extracts of soil samples. Changes that were made on the system included the replacement of anhydrous calcium chloride with anhydrous calcium sulphate and the replacement of the special sample tube with a modified one made from silica. Re-directing the flow of argon through the top of the Buchner funnel appeared to make the system compatible with aqueous extracts of soil samples. The interferences from 1000 ~g/mL of nickel(II) , cobalt(II), iron(III), copper(II) have been eliminated with the aid of 1.4 M hydrochloric acid and 1% (weight/volume) L-cystine. Greater than 90% recovery of 0.3 ~g/mL arsenic signal was achieved in each case. Furthermore, 103% of arsenic signal was accomplished in the presence of 1000 ~g/mL cadmium with 5 M Hel. tVhen each of the interferents was present in solution at 1000 ppm, a recovery of 85% was achieved by using 5 M hydrochloric acid and 3% (weight/volume) L-cystine. Without L-cystine and when 1.4 M hydrochloric acid was used, the recoveries were 0% (Ni), 0% (Co), 88% (Fe), 15% (Cu), 18% (Cd). Similarly, a solution containing 1000 ppm of each interferent gave a zero percent recovery of arsenic. The reduction of trivalent and pentavalent arsenic at a pH less than one has also been investigated and shown to be quantitative if peak areas are measured. The reproducibility determination of a 0.3 Vg/mL standard arsenic solution by hydride generation shows a relative standard deviation of 3.4%. The detection limits with and without Porapak Q have been found to be 0.6 ng/mL and 1.0 ng/mL, respectively.

The investigation of the reduction mechanism of the 5a-reductase enzyme of Penicillium decumbens /

The 5a-reductase of Penicillium decumbens ATCC 10436 was used as a model for the mammalian enzyme to investigate the mechanism of reduction of testosterone to 5adihydrotestosterone . The purpose of this study was to search for specific 5a-reductase inhibitors which antagonize prostate cancer . In a whole-cell biotransformation mode, this organism reduced testosterone (1) to 5a-dihydrosteroids (8) and 5aandrostane- 3, 17-dione (9) in yields of 28% and 37% respectively. Control experiments have shown that 5aandrostane- 3, 17-dione (9) can be produced from the corresponding alcohol (8) in a subsequent reaction separate from that catalysed by the 5a-reductase enzyme . Androst-4- ene-3, 17-dione (2) is reduced to give only (9) with a recovery of 80% The stereochemistry of the reduction was determined by 500 MHz ^H NMR analysis of the products resulting from the deuterium labelled substrates. The results were obtained by an analysis of the NOE difference spectra, double-quantum filtered phase sensitive COSY 2-D spectra, and ^^c-Ir 2-D shift correlation spectra of deuterium labelled products. According to the unambiguous assignment of the signals due to H-4a and H-4Ii in 5a-dihydro steroids, the NMR data show clearly that addition of hydrogen to the 4{5)K bond has occurred in a trans manner at positions 413 and 5a. To Study the reduction mechanism of this enzyme, several substrates were prepared as following; 3-methyleneandrost-4-en- 17fi-ol(3), androst-4-en-17i5-ol(5) , androst-4-en-3ii, 17fi-diol (6) and 4, 5ii-epoxyandrostane-3, 17-dione (7) . Results suggest that this enzyme system requires an oxygen atom at the 3-position of the steroid in order to bind the substrate. Furthermore, the mechanism of this 5a-reductase may proceed via direct addition of hydrogen at the 4,5 position without involvement of a carbonyl group as an intermediate.

Broad reduction and adoption in ring-billed gulls (Larus Delaworensis): the potential for inergenerational conflict

Patterns of intra-clutch egg size variation and intra-clutch hatch intervals in the Ring-billed gull (Larus delawarensis) were documented during the peak nesting period of two consecutive breeding seasons, at a colony near Port Colborne, Ontario. Egg size decreased with laying order; third laid eggs were significantly smaller than first laid eggs. Hatching of the third egg was delayed from that of first and second eggs. Intraclutch egg size differences established initial size disparities among chicks at hatch. Hatch intervals further exaggerated size disparities during the early post brood completion period. Competitive asymmetries among chicks were associated with increased mortality rates among third hatched chicks despite the lack of evidence of a sibling feeding hierarchy. Fledging success in 1987 was greater than in 1988. A "brood reduction strategy" appears to have enabled parents in 1987, to obtain an extra unit of reproductive fitness, while in 1988 parents were often unable to raise the entire brood and third chicks likely represented insurance reproductive value. Experimental broods (1988) were created in which hatch intervals were double those of natural intervals. The size disparities among chicks were significantly greater than in control broods, and the pattern of mortality among chicks suggested that first chicks benefited at a cost to second and third chicks. Parents of peak experimental broods achieved a fledging success rate similar to that of control broods. Characteristics of chick adoptions were also recorded. In each study year, 9 chicks abandoned their natal territories, 6 of which were adopted. Chicks consistently established themselves into broods where they were older than resident chicks. No direct evidence of cost to foster parents, or benefits to adopted chicks was obtained, although fledging success of adopted chicks was high.