Investigations into the determinations of hydride-forming elements

Analytical methods for the determination of trace amounts of germanium, tin and arsenic were established using hydride generation coupled with direct current plasma atomic emission spectrometry. A continuous gas flowing batch system for the hydride generation was investigated and was applied to the determination of germanium(Ge), tin(Sn), antimony(Sb) and lead(Pb) (Preliminary results suggest that it is also applicable to arsenic)As) ). With this system, the reproducibility of signals was improved and the determination was speeded up, compared with the conventional batch type hydride generation system. Each determination was complete within one minute. Interferences from a number of transition metal ions, especially from Pd(II), Pt(IV), Ni(II), Cu(II), Co(II), and Fe(II, III), have proven to be very serious under normal conditions, in the determination of germanium, tin, and arsenic. These interference effects were eliminated or significantly reduced in the presence of L-cystine or L-cysteine. Thus, a 10-1000 fold excess of Ni(II), Cu(II), Co(II), Fe(II), Pt(IV), Pd(II), etc. can be tolerated without interference, In the presence of L-cystine or L-cysteine, compared with absence of interference reducing agent. The methods for the determination of Ge, Sn, and As were examined by the analyses of standard reference materials. Interference effects from the sample matrix, for example, in transition metal-rich samples, copper, iron and steel, were eliminated by L-cystine (for As and Sn) and by LI cysteine (for Ge). The analysis of a number of standard reference materials gave excellent results of As and Sn contents in agreement with the certified values, showing there was no systematic interference. The detection limits for both germanium and tin were 20 pg ml- I . Preliminary studies were carried out for the determination of antimony and lead. Antimony was found to react with NaBH4, remaInIng from the previous determinations, giving an analytical signal. A reversed injection manner, i.e., injection of the NaBH4 solution prior to the analyte solution was used to avoid uncertainty caused by residual NaBH4 present and to ensure that an excess of NaB H4 was available. A solution of 0.4% L-cysteine was found to reduce the interference from selected transition metal ions, Co(II), Cu(II), Ni(II) and Pt(IV). Hydrochloric acid - hydrogen peroxide, nitric acid - ammonium persulphate, and potassium dichromate malic acid reaction systems for lead hydride generation were compared. The potassium dichromate - malic acid reaction medium proved to be the best with respect to reproducibility and minimal interference. Cu(II), Ni(II), and Fe(II) caused strong interference In lead determinations, which was not reduced by L-cysteine or Lcystine. Sodium citrate, ascorbic acid, dithizone, thiosemicarbazide and penicillamine reduced interferences to some extent. Further interference reduction studies were carried out uSIng a number of amino acids, glycine, alanine, valine, leucine and histidine, as possible interference reducing agents in the determination of germanium. From glycine, alanine, valine to leucine, the interference reduction effect in germanium determinations decreased. Histidine II was found to be very promising In the reduction of interference. In fact, histidine proved more efficient than L-cystine and L-cysteine In the reduction of interference from Ni(II) in the determination of germanium. Signal enhancement by easily ionized elements (EIEs), usually regarded as an interference effect in analysis by DCP-AES, was studied and successfully applied to advantage in improving the sensitivity and detection limit in the determination of As, Ge, Sn, Sb, and Pb. The effect of alkali and alkaline-earth elements on the determination of the above five hydride forming elements was studied. With the appropriate EIE, a signal enhancement of 40-115% was achieved. Linear calibration and good reproducibility were also obtained in the presence of EIEs. III

The design of a reflectance spectrometer and its calibration using SrTiO3 /

A new Ultra-High Vacuum (UHV) reflectance spectrometer was successfully designed, making use of a Janis Industries ST-400 sample cryostat, IR Labs bolometer, and Briiker IFS 66 v/S spectrometer. Two of the noteworthy features include an in situ gold evaporator and internal reference path, both of which allow for the experiment to progress with a completely undisturbed sample position. As tested, the system was designed to operate between 4.2 K and 325 K over a frequency range of 60 - 670 cm~^. This frequency range can easily be extended through the addition of appUcable detectors. Tests were performed on SrTiOa, a highly ionic incipient ferroelectric insulator with a well known reflectance. The presence and temperatmre dependence of the lowest frequency "soft" mode were measured, as was the presence of the other two infrared modes. During the structural phase transition from cubic to tetragonal perovskite, the splitting of the second phonon mode was also observed. All of the collected data indicate good agreement with previous measurements, with a minor discrepency between the actual and recorded sample temperatures.

Scales, networks and uncertainty : an examination of environmental policy-making in Ontario

Through a case-study analysis of Ontario's ethanol policy, this thesis addresses a number of themes that are consequential to policy and policy-making: spatiality, democracy and uncertainty. First, I address the 'spatial debate' in Geography pertaining to the relevance and affordances of a 'scalar' versus a 'flat' ontoepistemology. I argue that policy is guided by prior arrangements, but is by no means inevitable or predetermined. As such, scale and network are pragmatic geographical concepts that can effectively address the issue of the spatiality of policy and policy-making. Second, I discuss the democratic nature of policy-making in Ontario through an examination of the spaces of engagement that facilitate deliberative democracy. I analyze to what extent these spaces fit into Ontario's environmental policy-making process, and to what extent they were used by various stakeholders. Last, I take seriously the fact that uncertainty and unavoidable injustice are central to policy, and examine the ways in which this uncertainty shaped the specifics of Ontario's ethanol policy. Ultimately, this thesis is an exercise in understanding sub-national environmental policy-making in Canada, with an emphasis on how policy-makers tackle the issues they are faced with in the context of environmental change, political-economic integration, local priorities, individual goals, and irreducible uncertainty.

How health organizations can apply scenario based planning and analytic technologies to make strategic consequential decisions in a time of uncertainty

The magnitude of the cervical cancer problem, coupled with the potential for prevention with recent technological advances, made it imperative to step back and reassess strategic options for dealing with cervical cancer screening in Kenya. The purpose of this qualitative study was: 1) to explore the extent to which the Participatory Action Research (PAR) methodology and the Scenario Based Planning (SBP) method, with the application of analytics, could enable strategic, consequential, informed decision making, and 2) to determine how influential Kenyan decision makers could apply SBP with analytic tools and techniques to make strategic, consequential decisions regarding the implementation of a Cervical Self Sampling Program (CSSP) in both urban and rural settings. The theoretical paradigm for this study was action research; it was experiential, practical, and action oriented, and resulted in co-created knowledge that influenced study participants’ decision making. Action Africa Help International (AAHI) and Brock University collaborated with Local Decision Influencing Participants (LDIP’s) to develop innovative strategies on how to implement the CSSP. SBP tools, along with traditional approaches to data collection and analysis, were applied to collect, visualize and analyze predominately qualitative data. Outputs from the study included: a) a generic implementation scenario for a CSSP (along with scenarios unique to urban and rural settings), and b) 10 strategic directions and 22 supporting implementation strategies that address the variables of: 1) technical viability, 2) political support, 3) affordability, 4) logistical feasibility, 5) social acceptability, and 6) transformation/sustainability. In addition, study participants’ capacity to effectively engage in predictive/prescriptive strategic decision making was strengthened.