The impact of drug-induced dyskinesias on rapid alternating movements in patients with Parkinson's disease

We investigated the likelihood that hypokinesia/bradykinesia coexist with druginduced dyskinesias (DID) in patients with Parkinson's disease (PD). The influence of dyskinesias on rapid alternating movements (RAM) was investigated in ten dyskinetic patients (DPD). Their motor performance was compared to that of ten age/gendermatched non-dyskinetic patients (NDPD) and ten healthy control subjects. Whole-body magnitude (WBM) and fast pronation-supination at the wrist were recorded using 6- degrees of freedom magnetic motion tracker and forearm rotational sensors, respectively. Subjects were asked to pronate-supinate their dominant hand for 10s. Pre- and postmeasures were taken in a neutral position for 20s. RANGE (measure of hypokinesia), DURATION (measure of bradykinesia). VELOCITY (measure of bradykinesia) and IRREGULARITY (measure of fluctuations in movement amplitude) were used to assess RAM performance. Results showed that DPD patients had greater WBM than NDPD and control groups during rest and RAM performance. There were no differences in performance between NDPD and DPD groups for RANGE, DURATION and VELOCITY, despite significant longer disease duration for the DPD group (DPD = 15.5 ± 6.2 years versus NDPD = 6.6 ± 2.6 years). However, both the NDPD and DPD groups showed lower RANGE, longer DURATION, and reduced VELOCITY compared to controls,, suggesting the presence of bradykinesia and hypokinesia. In the case of IRREGULARITY, DPD patients showed clear fluctuations in movement amplitude compared to the NDPD and control groups. However, the lack of correlation between WBM and IRREGULARITY within the DPD group (Spearman's rank order, Rho - 0.31, p > 0.05), suggests that DID was not the primary cause of the fluctuating movementamplitude observed in that group. In conclusion, these findings suggest that DID may coexists with bradykinesia and hypokinesia, but that they are not inevitably accompanied with worsening motor performance.

Rapid [Gamma]-amino acid synthesis and the inhibition of the growth and development of oblique banded leaf-roller larvae

The hypothesis that rapid y-aminobutyric acid (GABA) accumulation is a plant defense against phytophagous insects was investigated. Simulation of mechanical damage resulting from phytophagous insect activity increased soybean (Glycine max L.) leaf GABA 10- to 25-fold within 1 to 4 min. Pulverizing leaf tissue resulted in a value of 2. 15 (±O. 11 SE) ~mol GABA per gram fresh weight. Increasing the GABA levels in a synthetic diet from 1.6 to 2.6 Jlffiol GABA per gram fresh weight reduced the growth rates, developmental rates, total biomass (50% reduction), and survival rates (30% reduction) of cultured Oblique banded leaf-roller (OBLR) (Choristonellra rosacealla Harris) larvae. In field experiments OBLR larvae were found predominantly on young terminal leaves which have a reduced capacity to produce GABA in response to mechanical damage. Glutamate decarboxylase (GAD) is a cytosolic enzyme which catalyses the decarboxylation of L-Glu to GABA. GAD is a calmodulin binding enzyme whose activity is stimulated dramatically by increased cytosolic H+ or Ca2 + ion concentrations. Phytophagous insect activity will disrupt the cellular compartmentation of H+ and Ca2 +, activate GAD and subsequent GABA accumulation. In animals GABA is a major inhibitory neurotransmitter. The possible mechanisms resulting in GABA inhibited growth and development of insects are discussed.

A. S. Whiting Manufacturing Company Limited, minute book, 1872-1909.

The Cedar Dale Scythe Works was the second manufacturing company that A.S. Whiting had established in Oshawa, the first being the Oshawa Manufacturing Co. in 1852. The Oshawa Manufacturing Co. was eventually taken over by the Joseph Hall Works in 1857. In 1862, the Cedar Dale Works was built after being in a rented space in the Hall Works for two years, building scythes and hoes. With the building of the firm, the village of Cedar Dale was established. In 1867, the firm became Whiting and Cowan when John Cowan bought into the company. After the death of Whiting in 1867, his son-in-law, R.S. Hamlin headed the company. By 1872, it became the A.S. Whiting Manufacturing Co. when Cowan withdrew from the business. Before Whiting’s death, the company had been profitable but due to new machinery being developed, hand tools were becoming obsolete and the business only lasted for a few more years (source: Oshawa Community Museum and Archives Web site).

Manufacturing 'authenticity' : a case study of the Niagara wine cluster

In this thesis, I use "Fabricating Authenticity," a model developed in the Production of Culture Perspective, to explore the evolving criteria for judging what constitute "real" and authentic Niagara wines, along with the naturalization of these criteria, as the Canadian Niagara wine cluster has come under increasing stress from globalization. Authenticity has been identified as a hallmark of contemporary marketing and important to cultural industries, which can use it for creating meaningful differentiation; making it a renewable resource for securing consumers, increasing market value; and for relationships with key brokers. This is important as free trade and international treaties are making traditional protective barriers, like trade tariffs and markups, obsolete and as governments increasingly allocate industry support via promotion and marketing policies that are directly linked to objectives of city and regional development, which in turn carry real implications for what gets to be judged authentic and inauthentic local culture. This research uses a mixed methods research strategy, drawing upon ethnographic observation, marketing materials, newspaper reports, and secondary data to provide insight into the processes and conflicts over efforts to fabricate authenticity, comparing the periods before and after the passage of NAFT A to the present period. The Niagara wine cluster is a good case in point because it has little natural advantage nor was there a tradition of quality table wine making to facilitate the naturalization of authenticity. Geographic industrial clusters have been found particularly competitive in the global economy and the exploratory case study contributes to our understanding of the dynamic of '1abricating authenticity," building on various theoretical propositions to attempt to derive explanations of how global processes affect strategies to create "authenticity," how these strategies affect cultural homogeneity and heterogeneity at the local level, and how the concept of "cluster" contributes to the process of managing authenticity.

O.S. Rixford Manufacturing Company corporate stock book, 1883-1898.

Around 1837, Luther Rixford founded a tool manufacturing business (originally known as the Luther Rixford Manufacturing Co.) in East Highgate, Vermont, that specialized in manufacturing scythes and other agricultural tools. A branch of this business was established in Upper Bedford, Quebec, around the late 1840's. Subsequent generations of the Rixford family took over the operations of both facilities, and in 1857 Oscar S. Rixford renamed the company the O.S. Rixford Manufacturing Co. The company was incorporated in 1883. Around 1920, the O.S. Rixford Manufacturing Company (of Canada) was acquired by Welland Vale Manufacturing, in St. Catharines, Ontario. The Rixford Company in Vermont continued operations until 1956, when decreasing demand for the tools they manufactured caused them to close their doors.

Transforming Downtown St. Catharines into a Creative Cluster

The City of St. Catharines, located on the southern shore of Lake Ontario, is Niagara Region's only major urban node. Like many small/medium-sized cities in Canada and abroad, the city experienced a rapid decline of large-scale manufacturing in the 1990s. In a renewed attempt to recover from this economic depression, and spurred by Provincial policy, the City implemented the Downtown Creative Cluster Master Plan (DCCMP) in 2008. In this thesis I conduct a discourse analysis of the DCCMP. My analysis indicates that DCCMP is shaped by neoliberal economic development paradigms. As such it is designed to restructure the downtown into a creative cluster by attracting developers/investors and appealing to the interests, tastes, and desires of middle-class consumers and creatives. I illustrate that this competitive city approach to urban planning has a questionable track record, and has been shown to result in retail and residential gentrification and displacement.

Letters Patent Incorporating The Ontario Grape Growing and Wine Manufacturing Company

The patent incorporates the Ontario Grape Growing and Wine Manufacturing Company for the purpose "for the manufacture of wine within the province of Ontario" and is recorded as no. 85 on June 9, 1873.

Certificate for Five Shares of Common Stock in Lincoln Manufacturing Company Limited

Certificate for 5 shares of common stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 10, 1923.

Certificate for Ten Shares of Accumulative Preference Capital Stock in Lincoln Manufacturing Company Limited

Certificate for 10 shares of accumulative preference capital stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 10, 1923.

Certificate for Twenty Shares of Accumulative Preference Capital Stock in Lincoln Manufacturing Company Limited

Certificate for 20 shares of accumulative preference capital stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 14, 1923.

Certificate for Twenty-Five Shares of Common Stock in Lincoln Manufacturing Company, Limited

Certificate for 25 shares of common in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, April 14, 1923.

Certificate for Ten Shares of Accumulative Preference Shares of Capital Stock in Lincoln Manufacturing Company Limited

Certificate for 10 shares of accumulative preference shares of capital stock in Lincoln Manufacturing Company Limited to Hamilton K. Woodruff, July 4, 1923.