Characterization of amine-based CO2 adsorbent for Direct Air Capture

Direct air capture technologies extract CO2 from air at a concentration of as low as 400ppm. The captured CO2 can be used for the production of synthetic methane or liquid fuels. In the literature survey of this thesis, results related to direct air capture by using solid sorbents are presented and critically discussed. In the experimental part, a proprietary amine functionalized resin is characterized for direct air capture. Structural comparison is also made to a commercial resin of similar type. Based on the literature survey, the most important parameters in direct air capture process are low adsorption and desorption temperatures, good cyclic stability in dry and humid conditions, high CO2 outlet purity and a high working capacity. Primary amine functionalized solid sorbents are found to often have good qualities for direct air capture, but overall process performance is rarely studied exhaustively. Based on FTIR spectra, both resin adsorbents are found to be consisted of polystyrene functionalized with primary amine, and capture CO2 by forming carbamate. The commercial resin is more porous, has a slightly higher particle size and contains fewer impurities. Important physical parameters are gained of the proprietary resin, such as internal porosity and median particle size. The resin’s amine group is found to endure thermal treatment reasonably well. CO2 adsorption capacity gained by thermal gravimetry from 400ppm CO2 is highest at 25oC, and is found to be reasonable compared to values presented in literature. Thus, the resin is stated to exhibit promising qualities for direct air capture.

Diverse Routes from School, via Higher Education, to Employment. A Comparison of Nine European Countries

The central theme for this study is graduate employment and employability in European-wide discussion. In this study, the complex relationships between higher education and the world of work are explored from the vantage point of how individuals make use of the higher education system in their transition from education to employment. The variation among individual transition processes in nine European countries is analysed with the help of a comparable graduate survey. Countries in this study are Italy, Spain, France, Austria, Germany, the Netherlands, the United Kingdom, Finland, and Norway. The data used for the study is commonly known as the “CHEERS” or “Careers after Higher Education, A European Research Survey.” The data was collected in 1999. The study discusses the possibilities and limitations the higher education system has in supporting the initial education-to-work transitions of youth. The study also addresses problems with comparing national higher education systems in terms of enrolment and graduate employability. A central purpose for this study is to reflect on concerns about the prolongation of individual transitions with a framework that simultaneously considers both the graduate employability and the duration of the education-to-work transition process. The key concept for this study is the standard student/graduate; synonym concepts are the traditional and the conventional student/graduate. Standard graduates are relatively young individuals who are performing their initial transition from education to working-life and who complete the degree-earning process within the stipulated time frame. In all nine countries, standard graduates make up a considerable share of the student flow, passing from higher education to the labour markets. The share of standard graduates is by far the largest in France, where they comprise the overwhelming mass. The proportion of the standard graduates is the lowest in Italy, Finland, and Austria where approximately one in four graduates completed the process of higher education within the stipulated time frame. Of the nine countries compared, employability of the whole graduate population is the greatest in Norway, the UK, Finland, and the Netherlands. Compared with employability of the whole graduate population, variation among the countries is considerably reduced when reviewing the employability of only the standard graduates. Thereby, even though the ranking among countries remains largely unchanged, the variations among them are smaller when the duration of degree earning process is standardized. The study also discusses other ideal types of student careers (or transition processes) besides the standard student/graduate. Results of regression analyses indicate that that at the pan-European level analysis, the graduate labour markets are not heavily segmented in terms of the type of the individual transition process. When considering within-country differences between the graduates, the field of studies is clearly a more powerful explanatory variable than the type of the transition process. There are, nevertheless, clear indications that, irrespective of the country, chances of finding a high status job are, on the average, highest amongst those who graduate within the stipulated duration of the degree program and who thereby have experienced the standard student career, whereas, participating in working life while studying protects against unemployment after finishing one’s degree.

Competence Development and Capacity Building of Sawmill Enterprises in Kenya – A Human Resources Development Approach

The Kenyan forestry and sawmilling industry have been subject to a changing environment since 1999 when the industrial forest plantations were closed down. This has lowered raw material supply and it has affected and reduced the sawmill operations and the viability of the sawmill enterprises. The capacity of the 276 registered sawmills is not sufficient to fulfill sawn timber demand in Kenya. This is because of the technological degradation and lack of a qualified labor force, which were caused because of non-existent sawmilling education and further training in Kenya. Lack of competent sawmill workers has led to low raw material recovery, under utilization of resources and loss of employment. The objective of the work was to suggest models, methods and approaches for the competence and capacity development of the Kenyan sawmilling industry, sawmills and their workers. A nationwide field survey, interviews, questionnaire and literature review was used for data collection to find out the sawmills’ competence development areas and to suggest models and methods for their capacity building. The sampling frame included 22 sawmills that represented 72,5% of all the registered sawmills in Kenya. The results confirmed that the sawmills’ technological level was backwards, productivity low, raw material recovery unacceptable and workers’ professional education low. The future challenges will be how to establish the sawmills’ capacity building and workers’ competence development. Sawmilling industry development requires various actions through new development models and approaches. Activities should be started for technological development and workers’ competence development. This requires re-starting of vocational training in sawmilling and the establishment of more effective co-operation between the sawmills and their stakeholder groups. In competence development the Enterprise Competence Management Model of Nurminen (2007) can be used, whereas the best training model and approach would be a practically oriented learning at work model in which the short courses, technical assistance and extension services would be the key functions.