Delivery system for location based information in wireless IP networks

Tämä työ esittelee uuden tarjota paikasta riippuvaa tietoa langattomien tietoverkkojen käyttäjille. Tieto välitetään jokaiselle käyttäjälle tietämättä mitään käyttäjän henkilöllisyydestä. Sovellustason protokollaksi valittiin HTTP, joka mahdollistaa tämän järjestelmän saattaa tietoa perille useimmille käyttäjille, jotka käyttävät hyvinkin erilaisia päätelaitteita. Tämä järjestelmä toimii sieppaavan www-liikenteen välityspalvelimen jatkeena. Erilaisten tietokantojen sisällä on perusteella järjestelmä päättää välitetäänkö tietoa vai ei. Järjestelmä sisältää myös yksinkertaisen ohjelmiston käyttäjien paikantamiseksi yksittäisen tukiaseman tarkkuudella. Vaikka esitetty ratkaisu tähtääkin paikkaan perustuvien mainosten tarjoamiseen, se on helposti muunnettavissa minkä tahansa tyyppisen tiedon välittämiseen käyttäjille.

Implementing gateway monitoring service for infrastructure sensor networks

Wireless sensor networks and its applications have been widely researched and implemented in both commercial and non commercial areas. The usage of wireless sensor network has developed its market from military usage to daily use of human livings. Wireless sensor network applications from monitoring prospect are used in home monitoring, farm fields and habitant monitoring to buildings structural monitoring. As the usage boundaries of wireless sensor networks and its applications are emerging there are definite ongoing research, such as lifetime for wireless sensor network, security of sensor nodes and expanding the applications with modern day scenarios of applications as web services. The main focus in this thesis work is to study and implement monitoring application for infrastructure based sensor network and expand its usability as web service to facilitate mobile clients. The developed application is implemented for wireless sensor nodes information collection and monitoring purpose enabling home or office environment remote monitoring for a user.

An IP capable data link layer protocol for narrow band half-duplex packet data radio networks

The wide adaptation of Internet Protocol (IP) as de facto protocol for most communication networks has established a need for developing IP capable data link layer protocol solutions for Machine to machine (M2M) and Internet of Things (IoT) networks. However, the wireless networks used for M2M and IoT applications usually lack the resources commonly associated with modern wireless communication networks. The existing IP capable data link layer solutions for wireless IoT networks provide the necessary overhead minimising and frame optimising features, but are often built to be compatible only with IPv6 and specific radio platforms. The objective of this thesis is to design IPv4 compatible data link layer for Netcontrol Oy's narrow band half-duplex packet data radio system. Based on extensive literature research, system modelling and solution concept testing, this thesis proposes the usage of tunslip protocol as the basis for the system data link layer protocol development. In addition to the functionality of tunslip, this thesis discusses the additional network, routing, compression, security and collision avoidance changes required to be made to the radio platform in order for it to be IP compatible while still being able to maintain the point-to-multipoint and multi-hop network characteristics. The data link layer design consists of the radio application, dynamic Maximum Transmission Unit (MTU) optimisation daemon and the tunslip interface. The proposed design uses tunslip for creating an IP capable data link protocol interface. The radio application receives data from tunslip and compresses the packets and uses the IP addressing information for radio network addressing and routing before forwarding the message to radio network. The dynamic MTU size optimisation daemon controls the tunslip interface maximum MTU size according to the link quality assessment calculated from the radio network diagnostic data received from the radio application. For determining the usability of tunslip as the basis for data link layer protocol, testing of the tunslip interface is conducted with both IEEE 802.15.4 radios and packet data radios. The test cases measure the radio network usability for User Datagram Protocol (UDP) based applications without applying any header or content compression. The test results for the packet data radios reveal that the typical success rate for packet reception through a single-hop link is above 99% with a round-trip-delay of 0.315s for 63B packets.

Kaukokäyttöliittymä liikkuvalle robotille

Lappeenrannan teknillinen yliopiston Tietotekniikan osaston Tietojenkäsittelytieteen laitoksen tutkimuskäytössä olevaan liikkuvaan robottiin toteutettiin tässä työssä graafinen kaukokäyttöliittymä. Työlle on motivaationa laajennettavuus, jota olemassaoleva suljetun lähdekoodin käyttöliittymä ei pysty tarjoamaan. Työssä olennaisin on olio-ohjelmointitekniikalla toteutettu robotin datamallin, ja sen graafisen esityksen arkkitehtuurillinen erottaminen. Lisäksi tarkastellaan lyhyesti liikkuvien robottien kaukokäyttöliittymien teoriaa, ja WLAN-tekniikan soveltuvuutta robotin ja käyttöliittymän välisen yhteyden toteuttamiseen.

Authentication and authorization service for a community network

Wireless community networks became popular in uniting people with common interests. This thesis presents authentication and authorization service for a wireless community network using captive portal approach including ability to authenticate clients from associated networks thereby combining multiple communities in a syndicate. The system is designed and implemented to be reliable, scalable and flexible. Moreover, the result includes software management system, which automatically performs software updates at network’s access points. Future development of the system can be concentrated on an improvement of the software management system.

Improving the performance of a dismounted Future Force Warrior by means of C4I2SR

This thesis comprises seven peer-reviewed articles and examines systems and applications suitable for increasing Future Force Warrior performance, minimizing collateral damage, improving situational awareness and Common Operational Picture. Based on a literature study, missing functionalities of Future Force Warrior were identified and new ideas, concepts and solutions were created as part of early stages of Systems of Systems creation. These introduced ideas have not yet been implemented or tested in combat and for this reason benefit analyses are excluded. The main results of this thesis include the following: A new networking concept, Wireless Polling Sensor Network, which is a swarm of a few Unmanned Aerial Vehicles forming an ad-hoc network and polling a large number of fixed sensor nodes. The system is more robust in a military environment than traditional Wireless Sensor Networks. A Business Process approach to Service Oriented Architecture in a tactical setting is a concept for scheduling and sharing limited resources. New components to military Service Oriented Architecture have been introduced in the thesis. Other results of the thesis include an investigation of the use of Free Space Optics in tactical communications, a proposal for tracking neutral forces, a system for upgrading simple collaboration tools for command, control and collaboration purposes, a three-level hierarchy of Future Force Warrior, and methods for reducing incidents of fratricide.

Adaptive Routing Approaches for Networked Many-Core Systems

Through advances in technology, System-on-Chip design is moving towards integrating tens to hundreds of intellectual property blocks into a single chip. In such a many-core system, on-chip communication becomes a performance bottleneck for high performance designs. Network-on-Chip (NoC) has emerged as a viable solution for the communication challenges in highly complex chips. The NoC architecture paradigm, based on a modular packet-switched mechanism, can address many of the on-chip communication challenges such as wiring complexity, communication latency, and bandwidth. Furthermore, the combined benefits of 3D IC and NoC schemes provide the possibility of designing a high performance system in a limited chip area. The major advantages of 3D NoCs are the considerable reductions in average latency and power consumption. There are several factors degrading the performance of NoCs. In this thesis, we investigate three main performance-limiting factors: network congestion, faults, and the lack of efficient multicast support. We address these issues by the means of routing algorithms. Congestion of data packets may lead to increased network latency and power consumption. Thus, we propose three different approaches for alleviating such congestion in the network. The first approach is based on measuring the congestion information in different regions of the network, distributing the information over the network, and utilizing this information when making a routing decision. The second approach employs a learning method to dynamically find the less congested routes according to the underlying traffic. The third approach is based on a fuzzy-logic technique to perform better routing decisions when traffic information of different routes is available. Faults affect performance significantly, as then packets should take longer paths in order to be routed around the faults, which in turn increases congestion around the faulty regions. We propose four methods to tolerate faults at the link and switch level by using only the shortest paths as long as such path exists. The unique characteristic among these methods is the toleration of faults while also maintaining the performance of NoCs. To the best of our knowledge, these algorithms are the first approaches to bypassing faults prior to reaching them while avoiding unnecessary misrouting of packets. Current implementations of multicast communication result in a significant performance loss for unicast traffic. This is due to the fact that the routing rules of multicast packets limit the adaptivity of unicast packets. We present an approach in which both unicast and multicast packets can be efficiently routed within the network. While suggesting a more efficient multicast support, the proposed approach does not affect the performance of unicast routing at all. In addition, in order to reduce the overall path length of multicast packets, we present several partitioning methods along with their analytical models for latency measurement. This approach is discussed in the context of 3D mesh networks.

IoT Based Pain Management using Physiological Parameters

The continuous technology evaluation is benefiting our lives to a great extent. The evolution of Internet of things and deployment of wireless sensor networks is making it possible to have more connectivity between people and devices used extensively in our daily lives. Almost every discipline of daily life including health sector, transportation, agriculture etc. is benefiting from these technologies. There is a great potential of research and refinement of health sector as the current system is very often dependent on manual evaluations conducted by the clinicians. There is no automatic system for patient health monitoring and assessment which results to incomplete and less reliable heath information. Internet of things has a great potential to benefit health care applications by automated and remote assessment, monitoring and identification of diseases. Acute pain is the main cause of people visiting to hospitals. An automatic pain detection system based on internet of things with wireless devices can make the assessment and redemption significantly more efficient. The contribution of this research work is proposing pain assessment method based on physiological parameters. The physiological parameters chosen for this study are heart rate, electrocardiography, breathing rate and galvanic skin response. As a first step, the relation between these physiological parameters and acute pain experienced by the test persons is evaluated. The electrocardiography data collected from the test persons is analyzed to extract interbeat intervals. This evaluation clearly demonstrates specific patterns and trends in these parameters as a consequence of pain. This parametric behavior is then used to assess and identify the pain intensity by implementing machine learning algorithms. Support vector machines are used for classifying these parameters influenced by different pain intensities and classification results are achieved. The classification results with good accuracy rates between two and three levels of pain intensities shows clear indication of pain and the feasibility of this pain assessment method. An improved approach on the basis of this research work can be implemented by using both physiological parameters and electromyography data of facial muscles for classification.

Performance Analysis of IP based WSNs in real time systems

Wireless sensor networks (WSNs) are the key enablers of the internet of things (IoT) paradigm. Traditionally, sensor network research has been to be unlike the internet, motivated by power and device constraints. The IETF 6LoWPAN draft standard changes this, defining how IPv6 packets can be efficiently transmitted over IEEE 802.15.4 radio links. Due to this 6LoWPAN technology, low power, low cost micro- controllers can be connected to the internet forming what is known as the wireless embedded internet. Another IETF recommendation, CoAP allows these devices to communicate interactively over the internet. The integration of such tiny, ubiquitous electronic devices to the internet enables interesting real-time applications. This thesis work attempts to evaluate the performance of a stack consisting of CoAP and 6LoWPAN over the IEEE 802.15.4 radio link using the Contiki OS and Cooja simulator, along with the CoAP framework Californium (Cf). Ultimately, the implementation of this stack on real hardware is carried out using a raspberry pi as a border router with T-mote sky sensors as slip radios and CoAP servers relaying temperature and humidity data. The reliability of the stack was also demonstrated during scalability analysis conducted on the physical deployment. The interoperability is ensured by connecting the WSN to the global internet using different hardware platforms supported by Contiki and without the use of specialized gateways commonly found in non IP based networks. This work therefore developed and demonstrated a heterogeneous wireless sensor network stack, which is IP based and conducted performance analysis of the stack, both in terms of simulations and real hardware.

Business potential evaluation of wireless local area networks: Teleoperator’s view

The objective of the thesis was to evaluate business potential of wireless local area networks (WLAN, Wireless LAN). At first, the scope of business potential evaluation of technology was introduced. Next, a general framework of business potential evaluation of technology based on literature was presented. In addition, convergence of cellular networks and data networks was studied in order to get an insight of current situation of mobile telecommunications industry. Finally, wireless local area networks business potential was evaluated. A wireless local area network is a data communication system, which combines data connectivity with mobility and is implemented in unlicensed frequency bands, allowing new business opportunities to emerge. The main markets of WLAN are corporate networks, public area networks and access networks. At the moment the penetration of WLAN terminals is low which derives to low demand of wireless LAN services. In addition, unlicensed spectrum forces the teleoperators to set the service price relatively low. The business potential is in integrating wireless LANs to cellular networks and in offering value added services to end users. The future of wireless LAN is to be complementary network to cellular networks. In this vision cellular networks provide voice and low data services and broadband wireless networks enable multimedia services.

A Study of Multicast Performance in IEEE 802.11 Wireless Local Area Networks

Langattomat lähiverkot ovat yleistyneet ja monin paikoin niillä pyritään täysin korvaamaan perinteiset kaapeloidut verkot. Samalla verkoissa välitettävät palvelut monipuolistuvat. Etenkin interaktiivisten sisältöjen ja viiveriippuvaisten palvelujen välittämisessä korostuvat verkolle asettavat vaatimukset suorituskyvystä ja palveluntasosta. Radiotaajuuksilla tapahtuva tiedonsiirto on ongelmallista siirtomedian jaetun luonteen vuoksi. Käytettäessä ympärisäteileviä antenneja jokainen kantomatkan päässä oleva asema kuulee lähetyksen, vaikkei se olisi sille suunnattu. Tämä luo turvallisuusongelman, mutta lisäksi heikentää tehokkuutta, koska nykyisellä antenniteknologialla vain yksi asema kerrallaan voi lähettää häiriöttä kantoalueellaan. Täsmälähetykset yhden lähteen ja useiden kohteiden välillä luovat erillisiä siirtolinkkejä. Olisi luontevampaa luoda yksi lähetysvirta, johon useat vastaanottajat voivat kytkeytyä. Kaistan säästön vastapainona on tarve luoda ja ylläpitää näitä yhteyksiä. Käyttäjien liikkuvuuden ja siirtotien vaihtelevien ominaisuuksien vuoksi langattoman verkon rakenne ja rajat ovat epäselviä. Näihin haasteisiin on vastattava sekä protokolla- että sovellustasolla. Tässä tutkielmassa käydään ensin läpi IEEE 802.11 -standardin mukaisen langattoman verkon perusteet ja sen ominaisuuksiin liittyvät tyypilliset ongelmakohdat. Yleis- ja ryhmälähetyksiä tarkastellaan ensin perinteisessä IEEE 802.3 standardin mukaisessa langallisessa lähiverkossa ja selvitetään, miten vastaavat ominaisuudet toteutuvat IEEE 802.11 standardien mukaisissa langattomissa verkoissa. Käyttötapaustutkimuksissa keskitytään rajatussa ympäristössä tapahtuviin ryhmälähetyksiin. Erityisesti tutkitaan langattomien ryhmälähetysten käyttökelpoisuutta sekä langattoman ympäristön asettamia erityisvaatimuksia.

MANAGING STRATEGIC CHANGE:New Business Models Applying Wireless Technology as a Source of Competitive Edge

The diffusion of mobile telephony began in 1971 in Finland, when the first car phones, called ARP1 were taken to use. Technologies changed from ARP to NMT and later to GSM. The main application of the technology, however, was voice transfer. The birth of the Internet created an open public data network and easy access to other types of computer-based services over networks. Telephones had been used as modems, but the development of the cellular technologies enabled automatic access from mobile phones to Internet. Also other wireless technologies, for instance Wireless LANs, were also introduced. Telephony had developed from analog to digital in fixed networks and allowed easy integration of fixed and mobile networks. This development opened a completely new functionality to computers and mobile phones. It also initiated the merger of the information technology (IT) and telecommunication (TC) industries. Despite the arising opportunity for firms' new competition the applications based on the new functionality were rare. Furthermore, technology development combined with innovation can be disruptive to industries. This research focuses on the new technology's impact on competition in the ICT industry through understanding the strategic needs and alternative futures of the industry's customers. The change speed inthe ICT industry is high and therefore it was valuable to integrate the DynamicCapability view of the firm in this research. Dynamic capabilities are an application of the Resource-Based View (RBV) of the firm. As is stated in the literature, strategic positioning complements RBV. This theoretical framework leads theresearch to focus on three areas: customer strategic innovation and business model development, external future analysis, and process development combining these two. The theoretical contribution of the research is in the development of methodology integrating theories of the RBV, dynamic capabilities and strategic positioning. The research approach has been constructive due to the actual managerial problems initiating the study. The requirement for iterative and innovative progress in the research supported the chosen research approach. The study applies known methods in product development, for instance, innovation process in theGroup Decision Support Systems (GDSS) laboratory and Quality Function Deployment (QFD), and combines them with known strategy analysis tools like industry analysis and scenario method. As the main result, the thesis presents the strategic innovation process, where new business concepts are used to describe the alternative resource configurations and scenarios as alternative competitive environments, which can be a new way for firms to achieve competitive advantage in high-velocity markets. In addition to the strategic innovation process as a result, thestudy has also resulted in approximately 250 new innovations for the participating firms, reduced technology uncertainty and helped strategic infrastructural decisions in the firms, and produced a knowledge-bank including data from 43 ICT and 19 paper industry firms between the years 1999 - 2004. The methods presentedin this research are also applicable to other industries.

Wireless Network Technologies and Terminals for Mobile Applications

Viimeaikainen langattomien teknologioiden kehitys ja evoluutio johtaa uusiin mahdollisuuksiin business-to-business-teollisuussovellusten laatimisessa. Tämän työn tavoite on tutkia teknisten puitteiden ja perustan sekä teknologisen ennustamisen prosessia innovatiivisten langattomien sovellusten kehitysprosessissa. Työ keskittyy langattomiin teknologioihin - verkkoihin ja päätelaitteisiin. Työssä selvitetään saatavilla olevia ja tulevia langattomia verkkoteknologioita ja mobiilipäätelaitteita, arvioidaan niiden päätyypit, ominaisuudet, rajoitteet ja kehitystrendit, sekä määritellään pääasialliset tekniset ominaisuudet, jotka on huomioitava luotaessa langatonta ratkaisua. Tämä tieto vedetään yhteen jatkokäyttöä varten langattomien sovellusten päätelaitetietokantaan rakentamisen aikana. Työ tarjoaa kuvauksen päätelaitetietokannan suunnittelusta ja rakentamisesta sekä tutkii tietokantaa innovatiivisen esimerkkisovelluksen - Reaaliaikaisen On-Line Asiakaspalvelun - avulla.

Design of User Authentication System for Multi-operator wireless LANs

Langattomat lähiverkot ovat viime vuosikymmeninä saavuttaneet suuren suosion. Tässä työssä käsitellään käyttäjien todentamisjärjestelmän suunnittelua ja kehitystä langattomaan monioperaattoriverkkoon. Langattomassa monioperaattoriverkossa käyttäjillä on mahdollisuus käyttää eri operaattoreiden palveluita. Aluksi käsitellään olemassa olevia todentamismenetelmiä ja -järjestelmiä. minkä jälkeen kuvaillaan todentamisjärjestelmä langattomille monioperaattoriverkoille. Todentamisjärjestelmän ratkaisuvaihtoehtoja esitellään kaksi, niin sanotut moni- istunto - ja yksittäisistuntomalli. Moni-istuntomalli on normaali lähestymistapa käyttäjien todentamiseen tietokonejärjestelmissä. Siinä käyttäjän pitää tunnistautua ja todentaa itsensä jokaiselle verkon palvelulle erikseen. Yksittäisistuntomallissa pyritään parempaan luotettavuuteen ja käytettävyyteen. Siinä käyttäjä todentaa itsensä vain kerran ja voi sen jälkeen päästä useisiin palveluihin. Työn loppuosassa kuvaillaan suunnitellun järjestelmän toteutusta. Lisäksi ehdotetaan vaihtoehtoisia toteutustapoja, analysoidaan järjestelmän heikkouksia ja kerrotaan jatkokehitysmahdoillisuuksista.

Paikallisen WLAN-operaattorin liiketoimintasuunnitelma: Case Wireless

Työn tavoitteena oli selvittää uudenlaisen WLAN-verkkoyhteyden tarjoajan liiketoiminnallisia mahdollisuuksia ja -edellytyksiä. Uudenlaisessa mallissa loppukäyttäjällä on langatonta lähiverkkoa käyttäessään mahdollisuus valita mieleisensä Internet-operaattori sekä käyttää paikallisia palveluja ilman Internet-yhteyttä, alueverkon kautta. Lisaksi tutkittiin langattoman tiedonsiirron markkinointia. Työn case-osuudessa tutkittiin Lappeen¬rannan teknillisen korkeakoulun WLAN-hanketta, ja siinä rakennettua access-verkkoa. Koko langattoman tiedonsiirron liiketoimintakenttä on vasta hakemassa lopullisia muotojaan. Nopeasta yleistymisestä huolimatta WLAN:in massamarkkinoille tuloa hidastavat tietyt ongelmat, mm. verkkovierailut (sekä WLAN-verkkojen että eri langattomien tiedonsiirtoteknologioiden välillä), epäselvät laskutusmallit sekä yhteensopivuusongelmat. Tietoturva on WLAN:in ongelmista kuuluisin, mutta ei suurin este todellisten massamarkkinoiden saavuttamisessa. Hyödyntämällä teknologian omaksujaryhmien erilaisia piirteitä saadaan etua tavoiteltaessa massamarkkinoita. Case-verkon liiketoimintasuunnitelmasta käy ilmi, että mikäli WLAN yleistyy, kuten on odotettu, esitetty uudenlainen alueellinen liiketoimintamalli voi olla taloudellisesti mahdollinen. Esitetyt riskit ja oletukset on huomioitava alan epävarman kehityksen takia.