14 resultados para pre-school education and 1st cycle of basic education
em Doria (National Library of Finland DSpace Services) - National Library of Finland, Finland
Resumo:
Temat för studien handlar om gymnasielärares uppfattningar om kvalitet och om hur kvalitet kan utvecklas i gymnasieutbildningen in Tanzania. Studien är till sin karaktär kvalitativ och består av utprövade semistrukturerade intervjuer med sammanlagt trettio lärare som arbetar i fyra gymnasieskolor både i urbana och rurala miljöer. Lärarna har varierande arbetserfarenhet och undervisar i olika ämnen. Huvudfokus har gällt identifieringen av variationer i lärares uppfattningar om kvalitet. På basen av två forskningsfrågor avslöjar analysen uppfattningar av hur lärare förstår och önskar utveckla kvaliteten på gymnasieutbildningen. Resultaten visar att lärare förstår kvaliteten på utbildningen i sina skolor som försök att möta skolans och samhällets mål, som individuella prestationer och förmågor som att inneha kompetenser och som att möta utmaningar inom utbildning, Identifierade uppfattningar var baserade på lärarnas personliga kunskap, arbetsmiljön och varierande omständigheter som rådde i deras skolor. Uppfattningar om en förbättring av kvaliteten i gymnasieutbildningen innefattade utveckling av lärares motivation, skolmiljön, arbetet i klassrum, kvaliteten på lärares kunskaper och färdigheter och undervisningsmaterial. Ambitionen bakom studien ar att erbjuda en plattform för strategier för att förbättra kvaliteten på gymnasieutbildningen. Resultaten strävar till att ge en fördjupad insikt i uppfattningar hos en utvald grupp av lärare som arbetar under samma villkor inom gymnasieskolor I Tanzania. Av den här anledningen är den genererade kunskapen därför relevant för att belysa lärares uppfattningar även utanför den studerade gruppen av respondenter.
Resumo:
The purpose of this study was to investigate the effects of information and communication technology (ICT) on school from teachers’ and students’ perspectives. The focus was on three main subject matters: on ICT use and competence, on teacher and school community, and on learning environment and teaching practices. The study is closely connected to the national educational policy which has aimed strongly at supporting the implementation of ICT in pedagogical practices at all institutional levels. The phenomena were investigated using a mixed methods approach. The qualitative data from three cases studies and the quantitative data from three statistical studies were combined. In this study, mixed methods were used to investigate the complex phenomena from various stakeholders’ points of view, and to support validation by combining different perspectives in order to give a fuller and more complete picture of the phenomena. The data were used in a complementary manner. The results indicate that the technical resources for using ICT both at school and at homes are very good. In general, students are capable and motivated users of new technology; these skills and attitudes are mainly based on home resources and leisuretime use. Students have the skills to use new kinds of applications and new forms of technology, and their ICT skills are wide, although not necessarily adequate; the working habits might be ineffective and even wrong. Some students have a special kind of ICT-related adaptive expertise which develops in a beneficial interaction between school guidance and challenges, and individual interest and activity. Teachers’ skills are more heterogeneous. The large majority of teachers have sufficient skills for everyday and routine working practices, but many of them still have difficulties in finding a meaningful pedagogical use for technology. The intensive case study indicated that for the majority of teachers the intensive ICT projects offer a possibility for learning new skills and competences intertwined in the work, often also supported by external experts and a collaborative teacher community; a possibility that “ordinary” teachers usually do not have. Further, teachers’ good ICT competence help them to adopt new pedagogical practices and integrate ICT in a meaningful way. The genders differ in their use of and skills in ICT: males show better skills especially in purely technical issues also in schools and classrooms, whereas female students and younger female teachers use ICT in their ordinary practices quite naturally. With time, the technology has become less technical and its communication and creation affordances have become stronger, easier to use, more popular and motivating, all of which has increased female interest in the technology. There is a generation gap in ICT use and competence between teachers and students. This is apparent especially in the ICT-related pedagogical practices in the majority of schools. The new digital affordances not only replace some previous practices; the new functionalities change many of our existing conceptions, values, attitudes and practices. The very different conceptions that generations have about technology leads, in the worst case, to a digital gap in education; the technology used in school is boring and ineffective compared to the ICT use outside school, and it does not provide the competence needed for using advanced technology in learning. The results indicate that in schools which have special ICT projects (“ICT pilot schools”) for improving pedagogy, these have led to true changes in teaching practices. Many teachers adopted student-centred and collaborative, inquiry-oriented teaching practices as well as practices that supported students' authentic activities, independent work, knowledge building, and students' responsibility. This is, indeed, strongly dependent on the ICT-related pedagogical competence of the teacher. However, the daily practices of some teachers still reflected a rather traditional teacher-centred approach. As a matter of fact, very few teachers ever represented solely, e.g. the knowledge building approach; teachers used various approaches or mixed them, based on the situation, teaching and learning goals, and on their pedagogical and technical competence. In general, changes towards pedagogical improvements even in wellorganised developmental projects are slow. As a result, there are two kinds of ICT stories: successful “ICT pilot schools” with pedagogical innovations related to ICT and with school community level agreement about the visions and aims, and “ordinary schools”, which have no particular interest in or external support for using ICT for improvement, and in which ICT is used in a more routine way, and as a tool for individual teachers, not for the school community.
Resumo:
The study focuses on primary school teachers’ perceptions of environmental education, its integration into primary school education and teachers’ teaching practices in Tanzania. The thesis is based on empirical research. The theoretical underpinnings of the study are based on Palmer’s (1998) model of environmental education. According to the model, meaningful environmental education should include education about, in or through and for the environment. The study is supported by national and international literature from research done on environmental education and education for sustainable development and policy statements. The study is qualitative in nature, adopting phenomenography and phenomenology as points of departure. The empirical data was collected from four primary schools in Morogoro region in Tanzania. The study sample consisted of 31 primary school teachers. Data was collected through interviews and lesson observations. According to the results of the study, primary school teachers expressed variations in their perceptions of environmental education and education for sustainable development. Most of the teachers focused on the aspect of knowledge acquisition. According to Tanzanian education and training policy, environmental education has to be integrated into all subjects. Although there is environmental education in the primary school curriculum, it is not integrated on an equal footing in all subjects. Some subjects like science, social studies and geography have more environmental content than other subjects. Teachers claim that the approach used to integrate environmental education into the school curriculum was not favoured because many claimed that what is to be taught as environmental education in the various subjects is not shown clearly. As a result, many teachers suggested that to ensure that it is taught properly it should be included in the curriculum as an independent subject or as specific topics. The study revealed that teachers’ teaching practices in integrating environmental education varied from one subject to another. Although most of the teachers said that they used participatory methods, lesson observations showed that they limited themselves to question and answer and group discussion. However, the teachers faced a number of barriers in the teaching of environmental education, some of which include lack of teaching and learning resources, time and large class size. The role of teachers in the implementation of environmental education in developing an environmentally literate citizenry is of great significance. The responsibility of the government in developing a curriculum with clear goals and content, developing teachers’ capacity in the teaching of environmental education and provision of teaching and learning materials needs to be taken seriously by the government in educational plans and programs.
Resumo:
The survival of preterm born infants has increased but the prevalence of long-term morbidities has still remained high. Preterm born children are at an increased risk for various developmental impairments including both severe neurological deficits as well as deficits in cognitive development. According to the literature the developmental outcome perspective differs between countries, centers, and eras. Definitions of preterm infant vary between studies, and the follow-up has been carried out with diverse methods making the comparison less reliable. It is essential to offer parents upto-date information about the outcome of preterm infants born in the same area. A centralized follow-up of children at risk makes it possible to monitor the consequences of changes in the treatment practices of hospitals on developmental outcome. This thesis is part of a larger regional, prospective multidisciplinary follow-up project entitled “Development and Functioning of Very Low Birth Weight Infants from Infancy to School Age” (PIeniPAinoisten RIskilasten käyttäytyminen ja toimintakyky imeväisiästä kouluikään, PIPARI). The thesis consists of four original studies that present data of very low birth weight (VLBW) infants born between 2001 and 2006, who are followed up from the neonatal period until the age of five years. The main outcome measure was cognitive development and secondary outcomes were significant neurological deficits (cerebral palsy, CP, deafness, and blindness). In Study I, the early crying and fussing behavior of preterm infants was studied using parental diaries, and the relation of crying behavior and cognitive and motor development at the age of two years was assessed. In Study II, the developmental outcome (cognitive, CP, deafness, and blindness) at the age of two years was studied in relation to demographic, antenatal, neonatal, and brain imaging data. Development was studied in relationship to a full-term born control group born in the same hospital. In Study III, the stability of cognitive development was studied in VLBW and full-term groups by comparing the outcomes at the ages of two and five years. Finally, in Study IV the precursors of reading skills (phonological processing, rapid automatized naming, and letter knowledge) were assessed for VLBW and full-term children at the age of five years. Pre-reading skills were studied in relation to demographic, antenatal, neonatal, and brain imaging data. The main findings of the thesis were that VLBW infants who fussed or cried more in the infancy were not at greater risk for problems in their cognitive development. However, crying was associated with poorer motor development. The developmental outcome of the present population was better that has been reported earlier and this improvement covered also cognitive development. However, the difference to fullterm born peers was still significant. Major brain pathology and intestinal perforation were independent significant risk factors for adverse outcome, also when several individual risk factors were controlled for. Cognitive development at the age of two years was strongly related with development at the age of five years, stressing the importance of the early assessment, and the possibility for early interventions. Finally, VLBW children had poorer pre-reading skills compared with their full-term born peers, but the IQ was an important mediator even when children with mental retardation were excluded from the analysis. The findings suggest that counseling parents about the developmental perspectives of their preterm infant should be based on data covering the same birth hospital. Neonatal brain imaging data and neonatal morbidity are important predictors for developmental outcome. The findings of the present study stress the importance of both short-term (two years) and long-term (five years) follow-ups for the individual, and for improving the quality of care.
Resumo:
Työn tarkoituksena oli kerätä käyttövarmuustietoa savukaasulinjasta kahdelta suomalaiselta sellutehtaalta niiden käyttöönotosta aina tähän päivään asti. Käyttövarmuustieto koostuu luotettavuustiedoista sekä kunnossapitotiedoista. Kerätyn tiedon avulla on mahdollista kuvata tarkasti laitoksen käyttövarmuutta seuraavilla tunnusluvuilla: suunnittelemattomien häiriöiden lukumäärä ja korjausajat, laitteiden seisokkiaika, vikojen todennäköisyys ja korjaavan kunnossapidon kustannukset suhteessa savukaasulinjan korjaavan kunnossapidon kokonaiskustannuksiin. Käyttövarmuustiedon keräysmetodi on esitelty. Savukaasulinjan kriittisten laitteiden määrittelyyn käytetty metodi on yhdistelmä kyselytutkimuksesta ja muunnellusta vian vaikutus- ja kriittisyysanalyysistä. Laitteiden valitsemiskriteerit lopulliseen kriittisyysanalyysiin päätettiin käyttövarmuustietojen sekä kyselytutkimuksen perusteella. Kriittisten laitteiden määrittämisen tarkoitus on löytää savukaasulinjasta ne laitteet, joiden odottamaton vikaantuminen aiheuttaa vakavimmat seuraukset savukaasulinjan luotettavuuteen, tuotantoon, turvallisuuteen, päästöihin ja kustannuksiin. Tiedon avulla rajoitetut kunnossapidon resurssit voidaan suunnata oikein. Kriittisten laitteiden määrittämisen tuloksena todetaan, että kolme kriittisintä laitetta savukaasulinjassa ovat molemmille sellutehtaille yhteisesti: savukaasupuhaltimet, laahakuljettimet sekä ketjukuljettimet. Käyttövarmuustieto osoittaa, että laitteiden luotettavuus on tehdaskohtaista, mutta periaatteessa samat päälinjat voidaan nähdä suunnittelemattomien vikojen todennäköisyyttä esittävissä kuvissa. Kustannukset, jotka esitetään laitteen suunnittelemattomien kunnossapitokustannusten suhteena savukaasulinjan kokonaiskustannuksiin, noudattelevat hyvin pitkälle luotettavuuskäyrää, joka on laskettu laitteen seisokkiajan suhteena käyttötunteihin. Käyttövarmuustiedon keräys yhdistettynä kriittisten laitteiden määrittämiseen mahdollistavat ennakoivan kunnossapidon oikean kohdistamisen ja ajoittamisen laitteiston elinaikana siten, että luotettavuus- ja kustannustehokkuusvaatimukset saavutetaan.
Resumo:
Direct leaching is an alternative to conventional roast-leach-electrowin (RLE) zinc production method. The basic reaction of direct leach method is the oxidation of sphalerite concentrate in acidic liquid by ferric iron. The reaction mechanism and kinetics, mass transfer and current modifications of zinc concentrate direct leaching process are considered. Particular attention is paid to the oxidation-reduction cycle of iron and its role in direct leaching of zinc concentrate, since it can be one of the limiting factors of the leaching process under certain conditions. The oxidation-reduction cycle of iron was experimentally studied with goal of gaining new knowledge for developing the direct leaching of zinc concentrate. In order to obtain this aim, ferrous iron oxidation experiments were carried out. Affect of such parameters as temperature, pressure, sulfuric acid concentration, ferrous iron and copper concentrations was studied. Based on the experimental results, mathematical model of the ferrous iron oxidation rate was developed. According to results obtained during the study, the reaction rate orders for ferrous iron concentration, oxygen concentration and copper concentration are 0.777, 0.652 and 0.0951 respectively. Values predicted by model were in good concordance with the experimental results. The reliability of estimated parameters was evaluated by MCMC analysis which showed good parameters reliability.
Resumo:
Military conscription and peacetime military service were the subjects of heated political, social and cultural controversies during the early years of national independence in Finland. Both the critics and the supporters of the existing military system described it as strongly formative of young men’s physical and moral development into adult men and male citizens. The conflicts over conscription prompted the contemporaries to express their notions about what Finnish men were like, at their best and at their worst, and what should and could be done about it. This thesis studies military conscription as an arena for the “making of manhood” in peacetime Finnish society, 1918–1939. It examines a range of public images of conscripted soldiering, asking how soldiering was depicted and given gendered meanings in parliamentary debates, war hero myths, texts concerned with the military and civic education of conscripts, as well as in works of fiction and reminiscences about military training as a personal experience. Studying conscription with a focus on masculinity, the thesis explores the different cultural images of manliness, soldiering and male citizenship on offer in Finnish society. It investigates how political parties, officers, educators, journalists, writers and “ordinary” conscripts used and developed, embraced or rejected these notions, according to their political purposes or personal needs. The period between the two world wars can be described as a fast-forward into military modernity in Finland. In the process, European middle class gender ideologies clashed with Finnish agrarian masculinities. Nationalistic agendas for the militarisation of Finnish manhood stumbled against intense class conflicts and ideological resistance. Military propaganda used images of military heroism, civic virtue and individual success to persuade the conscripts into ways of thinking and acting that were shaped by bourgeois mentality, nationalistic ideology and religious morality. These images are further analysed as expressive of the personal experiences and emotions of their middle-aged, male authors. The efforts of these military educators were, however, actively resisted on many fronts, ranging from rural working class masculinities among the conscripted young men to ideological critiques of the standing army system in parliament. In narratives about military training, masculinity was depicted as both strengthened and contradicted by the harsh and even brutal practices of interwar Finnish military training. The study represents a combination of new military history and the historical study of men and masculinities. It approaches masculinity as a contested and highly political form of social and cultural knowledge that is actively and selectively used by historic actors. Instead of trying to identify a dominant or “hegemonic” form of masculinity within a pre-determined theoretical structure, this study examines how the meanings ascribed to manhood varied according to class, age, political ideology and social situation. The interwar period in Finland can be understood as a period of contest between different notions of militarised masculinity, yet to judge by the materials studied, there was no clear winning party in that contest. A gradual movement from an atmosphere of conflict surrounding conscription towards political and cultural compromises can be discerned, yet this convergence was incomplete and many division lines remained.
Resumo:
This thesis focuses on integration in project business, i.e. how projectbased companies organize their product and process structures when they deliver industrial solutions to their customers. The customers that invest in these solutions run their businesses in different geographical, political and economical environments, which should be acknowledged by the supplier when providing solutions comprising of larger and more complex scopes than previously supplied to these customers. This means that the suppliers are increasing their supply range by taking over some of the activities in the value chain that have traditionally been handled by the customer. In order to be able to provide the functioning solutions, including more engineering hours, technical equipment and a wider project network, a change is needed in the mindset in order to be able to carry out and take the required responsibility that these new approaches bring. For the supplier it is important to be able to integrate technical products, systems and services, but the supplier also needs to have the capabilities to integrate the cross-functional organizations and departments in the project network, the knowledge and information between and within these organizations and departments, along with inputs from the customer into the product and process structures during the lifecycle of the project under development. Hence, the main objective of this thesis is to explore the challenges of integration that industrial projects meet, and based on that, to suggest a concept of how to manage integration in project business by making use of integration mechanisms. Integration is considered the essential process for accomplishing an industrial project, whereas the accomplishment of the industrial project is considered to be the result of the integration. The thesis consists of an extended summary and four papers, that are based on three studies in which integration mechanisms for value creation in industrial project networks and the management of integration in project business have been explored. The research is based on an inductive approach where in particular the design, commissioning and operations functions of industrial projects have been studied, addressing entire project life-cycles. The studies have been conducted in the shipbuilding and power generation industries where the scopes of supply consist of stand-alone equipment, equipment and engineering, and turnkey solutions. These industrial solutions include demanding efforts in engineering and organization. Addressing the calls for more studies on the evolving value chains of integrated solutions, mechanisms for inter- and intra-organizational integration and subsequent value creation in project networks have been explored. The research results in thirteen integration mechanisms and a typology for integration is proposed. Managing integration consists of integrating the project network (the supplier and the sub-suppliers) and the customer (the customer’s business purpose, operations environment and the end-user) into the project by making use of integration mechanisms. The findings bring new insight into research on industrial project business by proposing integration of technology and engineering related elements with elements related to customer oriented business performance in contemporary project environments. Thirteen mechanisms for combining products and the processes needed to deliver projects are described and categorized according to the impact that they have on the management of knowledge and information. These mechanisms directly relate to the performance of the supplier, and consequently to the functioning of the solution that the project provides. This thesis offers ways to promote integration of knowledge and information during the lifecycle of industrial projects, enhancing the development towards innovative solutions in project business.
Resumo:
ilm OKM 2013
Resumo:
A direct-driven permanent magnet synchronous machine for a small urban use electric vehicle is presented. The measured performance of the machine at the test bench as well as the performance over the modified New European Drive Cycle will be given. The effect of optimal current components, maximizing the efficiency and taking into account the iron loss, is compared with the simple id=0 – control. The machine currents and losses during the drive cycle are calculated and compared with each other.