Effect of the environment inside and outside the cage on the activity and behaviour test performance of silver foxes

Selostus: Kasvatushäkin ympäristön vaikutus hopeakettujen käyttäytymiseen

High Performance Electrical Drive System for a Biomechanical Test and Rehabilitation Equipment

Suunniteltiin ja rakennettiin suoraa vääntömomenttisäätöä soveltava taajuudenmuuttajakäyttö oikosulkumoottorin ohjaukseen korvaamaan passiivinen jarrukäyttö. Laite on kuntoutuslaite, jolla tehdään lihasvoiman mittauksia ja voimaharjoituksia. Selvitettiin kaupallisten moottoreiden ja taajuudenmuuttajien suoritusominaisuuksia ja tämän perusteella valittiin käyttöön sopivat laitteet. Työssä esitetään kaksi oikosulkumoottorin ohjaustapaa: vektorisäätö ja suora vääntömomenttisäätö. Merkittävin osa tästä työstä käsittelee - tarkan turvallisuussuunnitelman lisäksi - kuntoutuslaitteen prototyypin komponentteja, kokoamista ja suoritustestien tuloksia.

Simulation and material calibration of ultra high strength steel (UHSS) S960 welded joint under static tensile test utilizing finite element method (FEM)

The aim of this work was to calibrate the material properties including strength and strain values for different material zones of ultra-high strength steel (UHSS) welded joints under monotonic static loading. The UHSS is heat sensitive and softens by heat due to welding, the affected zone is heat affected zone (HAZ). In this regard, cylindrical specimens were cut out from welded joints of Strenx® 960 MC and Strenx® Tube 960 MH, were examined by tensile test. The hardness values of specimens’ cross section were measured. Using correlations between hardness and strength, initial material properties were obtained. The same size specimen with different zones of material same as real specimen were created and defined in finite element method (FEM) software with commercial brand Abaqus 6.14-1. The loading and boundary conditions were defined considering tensile test values. Using initial material properties made of hardness-strength correlations (true stress-strain values) as Abaqus main input, FEM is utilized to simulate the tensile test process. By comparing FEM Abaqus results with measured results of tensile test, initial material properties will be revised and reused as software input to be fully calibrated in such a way that FEM results and tensile test results deviate minimum. Two type of different S960 were used including 960 MC plates, and structural hollow section 960 MH X-joint. The joint is welded by BöhlerTM X96 filler material. In welded joints, typically the following zones appear: Weld (WEL), Heat affected zone (HAZ) coarse grained (HCG) and fine grained (HFG), annealed zone, and base material (BaM). Results showed that: The HAZ zone is softened due to heat input while welding. For all the specimens, the softened zone’s strength is decreased and makes it a weakest zone where fracture happens while loading. Stress concentration of a notched specimen can represent the properties of notched zone. The load-displacement diagram from FEM modeling matches with the experiments by the calibrated material properties by compromising two correlations of hardness and strength.

Microgrids and their operations

Interconnection of loads and small size generation forms a new type of distribution systems, the Microgrid. The microgrids can be operated together with the utility grid or be operated autonomously in an island. Thesesmall grids present a new paradigm of the construction of the low voltage distribution systems. The microgrids in the distribution systems can become small, controllable units, which immediately react to the system's changes. Along with that the microgrids can realize the special properties, such as increasing the reliability, reducing losses, voltage sag correction, uninterruptible supplying. The goals of the thesis are to explain the principles of the microgrid's functioning, to clarify the main ideas and positive features of the microgrids, to find out and prove their advantages and explain why they are so popular nowadays all over the world. The practical aims of the thesis are to construct and build a test setup of a microgrid based on two inverters from SMA Technologie AG in the laboratory and to test all the main modes and parameters of the microgrid's operating. Also the purpose of the thesis is to test the main component of the microgrid - the battery inverter which controls allthe processes and energy flows inside a microgrid and communicates with the main grid. Based on received data the main contribution of the thesis consists of the estimation of the established microgrid from the reliability, economy and simplicity of operating points of view and evaluation ofthe advisability of its use in different conditions. Moreover, the thesis assumes to give the recommendations and advice for the future investigations of the built system.

Corporate Layoff Announcements and Shareholder Value: Empirical Evidence from Finland

Tutkimuksen tavoitteena on tutkia lyhyen aikavälin markkinareaktiota suomalaisten pörssiyhtiöiden irtisanomisilmoituksiin. Lisäksi tutkitaan poikkileikkausmenetelmän avulla, vaikuttavatko erilaiset yrityskohtaiset tekijät siihen miten osakemarkkinat suhtautuvat irtisanomisiin. Kolmantena tutkimuksen kohteena ovat maakohtaiset irtisanomisiin liittyvät tekijät sekä kuinka ekstensiivistä on yritysten tiedottaminen irtisanomisista. Aineisto sisältää 83 julkisesti annettua irtisanomistiedotetta viiden vuodenaikaväliltä (kesäkuu 2000 - kesäkuu 2005). Osakemarkkinoiden keskimääräistä reaktiota sekä kehitettyjä alihypoteeseja tutkittiin hyödyntämällä tapahtumatutkimusmetodia. Empiiriset tulokset osoittavat, että sijoittajat näkevät irtisanomisetkeskimääräisesti negatiivisina uutisina yhtiöiden markkina-arvon kannalta. Irtisanomisilmoituksia edeltävä markkinareaktio on negatiivinen tukien aiempia tutkimustuloksia Yhdysvaltojen ja Iso-Britannian markkinoilta. Erona aikaisempiin tutkimuksiin on kuitenkin se, että negatiivinen markkinareaktio on täysin hinnoiteltu jo ilmoitusta edeltävänä aikana. Tukea löytyi myös kaikille yrityskohtaisillealihypoteeseille, jotka selittävät sijoittajien reaktiota irtisanomisilmoituksiin: koko pääoman tuotto, suhdannesykli, corporate governance sekä yrityksen ja johdon maine.

Value at Risk in measuring market risk: Historical simulation

In this study the theoretical part was created to make comparison between different Value at Risk models. Based on that comparison one model was chosen to the empirical part which concentrated to find out whether the model is accurate to measure market risk. The purpose of this study was to test if Volatility-weighted Historical Simulation is accurate in measuring market risk and what improvements does it bring to market risk measurement compared to traditional Historical Simulation. Volatility-weighted method by Hull and White (1998) was chosen In order to improve the traditional methods capability to measure market risk. In this study we found out that result based on Historical Simulation are dependent on chosen time period, confidence level and how samples are weighted. The findings of this study are that we cannot say that the chosen method is fully reliable in measuring market risk because back testing results are changing during the time period of this study.

Developing of AC magnetometer and investigation of magnetic properties of LSMO

In this work AC magnetometer was developed and primary test measurements were performed for temperature range from 77 K up to 350 K in frequency range from 1 kHz up to 20 kHz. In the course of the present work dependencies of magnetization on temperature for Lao7Sr03Mni _yFeyO3 with y = 0.15, 0.20, 0.25 were obtained in DC magnetic field using SQUID magnetometer and in AC magnetic field using the developed AC magnetometer. Lai.XSrXMnO3 (LSMO) compounds belong to the class of Mn perovskites, which demonstrate very high degree of spin polarization. These materials are of great importance for nowadays applications in spintronics, where spin polarized electron transport is used. Spin glass like behavior was found as a characteristic feature of these solid solutions with the freezing temperature in the range 65 — 210 K.

Experiences in using a structured method in finding and defining new innovations: the strategic options approach

Investment decision-making on far-reaching innovation ideas is one of the key challenges practitioners and academics face in the field of innovation management. However, the management practices and theories strongly rely on evaluation systems that do not fit in well with this setting. These systems and practices normally cannot capture the value of future opportunities under high uncertainty because they ignore the firm’s potential for growth and flexibility. Real options theory and options-based methods have been offered as a solution to facilitate decision-making on highly uncertain investment objects. Much of the uncertainty inherent in these investment objects is attributable to unknown future events. In this setting, real options theory and methods have faced some challenges. First, the theory and its applications have largely been limited to market-priced real assets. Second, the options perspective has not proved as useful as anticipated because the tools it offers are perceived to be too complicated for managerial use. Third, there are challenges related to the type of uncertainty existing real options methods can handle: they are primarily limited to parametric uncertainty. Nevertheless, the theory is considered promising in the context of far-reaching and strategically important innovation ideas. The objective of this dissertation is to clarify the potential of options-based methodology in the identification of innovation opportunities. The constructive research approach gives new insights into the development potential of real options theory under non-parametric and closeto- radical uncertainty. The distinction between real options and strategic options is presented as an explanans for the discovered limitations of the theory. The findings offer managers a new means of assessing future innovation ideas based on the frameworks constructed during the course of the study.

Software Test Process Development

In this thesis, the components important for testing work and organisational test process are identified and analysed. This work focuses on the testing activities in reallife software organisations, identifying the important test process components, observing testing work in practice, and analysing how the organisational test process could be developed. Software professionals from 14 different software organisations were interviewed to collect data on organisational test process and testing‐related factors. Moreover, additional data on organisational aspects was collected with a survey conducted on 31 organisations. This data was further analysed with the Grounded Theory method to identify the important test process components, and to observe how real‐life test organisations develop their testing activities. The results indicate that the test management at the project level is an important factor; the organisations do have sufficient test resources available, but they are not necessarily applied efficiently. In addition, organisations in general are reactive; they develop their process mainly to correct problems, not to enhance their efficiency or output quality. The results of this study allows organisations to have a better understanding of the test processes, and develop towards better practices and a culture of preventing problems, not reacting to them.

Entrepreneurial orientation in small and medium-sized enterprises during economic crisis

The economic importance of small and medium-sized enterprises (SMEs) and entrepreneurship has increased significantly in recent decades and entrepreneurial activity and SMEs are deemed vital to economic progress. Therefore, it is justifiable to study how small firms and entrepreneurs can enhance their performance and emergence in the turbulent economic environment. The concept of entrepreneurial orientation (EO) has recently attracted considerable attention in the field of entrepreneurship research. EO generally refers to a firm’s propensity to be innovative, to be proactive and to take risks. A majority of EO studies so far have found that adopting EO associated entrepreneurial behaviors will help firms to create or sustain a high level of performance. This dissertation explores the main drivers and performance implications of EO for SMEs in time of economic crisis. Hence the first objective of this dissertation is to examine the performance implications of EO and to test the role of EO on how firms are treated by the crisis at operative level. The second objective is to expand the prevailing understanding of determinants of EO by exploring the relationship between owner's work related values, attitudes, demographic characteristics, firm’s financial resources and EO. EO was found to be a significant and positive factor behind a firm’s long run growth. Hence it can be said that EO has positive implications for firm performance. But on the other hand, during a time of economic crisis the different dimensions of EO had both positive and negative effects on performance of SMEs. The performance implications varied across different stages of the crisis and were also dependent on what measure was used for measuring the performance. The main drivers of EO in SMEs were the personal work related values of the entrepreneur and his/her prior experience as an entrepreneur. The intrinsic work values related to interest, responsibility, challenge, self-development or intellectual stimulation and values related to status, power, achievement and recognition had a positive effect on the level of EO. On the other hand, extrinsic values related to high income, material possessions, benefits such as generous holidays, job security, and comfort through good working conditions decreased the level of EO

Modelling Long-Run Relationship between Spot and Future Prices of Different Commodities

The purpose of this study is to investigate whether there exists any kind of relationship between the spot and future prices of the different commodities or not. Commodities like cocoa, coffee, crude oil, gold, natural gas and silver are considered from January 3, 2000 to December 31, 2012. For this purpose, ADF test and KPSS test are used in testing the stationarity whereas Johansen Cointegration test is used in testing the long-run relationship. Johansen co-integration test exhibits that there at least 5 co-integrating pairs out of 6 except crude oil. Moreover, the result of Granger Causality supports the fact that if two or more than two time series tend to be co-integrated there exists either uni-directional or bi-directional relationship. However, our results reveled that although there exists the co-integration between the variable, one might not granger causes another .VAR model is also used to measure the proportion of effects. These findings will help the derivative market and arbitragers in developing the strategies to gain the maximum profit in the financial market.

Cost-benefit analysis of using test automation in the development of embedded software

The goal of this thesis is to make a case study of test automation’s profitability in the development of embedded software in a real industrial setting. The cost-benefit analysis is done by considering the costs and benefits test automation causes to software development, before the software is released to customers. The potential benefits of test automation regarding software quality after customer release were not estimated. Test automation is a significant investment which often requires dedicated resources. When done accordingly, the investment in test automation can produce major cost savings by reducing the need for manual testing effort, especially if the software is developed with an agile development framework. It can reduce the cost of avoidable rework of software development, as test automation enables the detection of construction time defects in the earliest possible moment. Test automation also has many pitfalls such as test maintainability and testability of the software, and if those areas are neglected, the investment in test automation may become worthless or it may even produce negative results. The results of this thesis suggest that test automation is very profitable at the company under study.

Nordic alcohol policy in Europe: the adaptation of Finland’s, Sweden’s and Norway’s alcohol policies to a new policy framework, 1994-2013

The purpose of this thesis is to study how and to which extent Finland, Sweden and Norway have adapted their alcohol policies to the framework imposed to them by the EU and the European Economic Area (EEA) since the mid-1990s. This is done by studying the underlying mechanisms that have influenced the formation of alcohol policy in the Nordic countries in that period. As a part of this analysis main differences in alcohol policies and alcohol consumption between the three countries are assessed and the phenomenon of cross-border trade with alcohol is discussed. The study examines also the development of Finnish, Norwegian and Swedish alcohol policies between 1994 and 2012 and compares the Nordic alcohol policies with other alcohol policies in Europe as the situation was in 2012. The time frame of the study spans from the mid-1990s to the end of 2013 and is divided into three phases. Studying the role of the Europeanisation process on the formation of alcohol policies has a key role in the analysis. Besides alcohol policies, the analyses comprise the development of alcohol consumption and cross-border trade with alcohol. In addition, a quantitative scale constructed to measure the strictness of alcohol policies is utilised in the analyses. The results from the scale are used to substantiate the qualitative analysis and to test whether the stereotypical view of a strict Nordic alcohol policy is still true. The results from the study clearly corroborate earlier findings on the significance of Europeanisation and the Single Market for the development of alcohol policies in the Nordic countries. Free movement of goods and unhindered competition have challenged the principle of disinterest and enabled private profit seeking in alcohol trade. The Single Market has also contributed to the increase in availability of alcohol and made it more difficult for the Nordic EU member states to maintain restrictive alcohol policies. All in all, alcohol policies in the Nordic countries are more liberal in 2013 than they were in 1994. Norway, being outside the EU has, however, managed to maintain a stricter alcohol policy than Finland and Sweden. Norway has also been spared from several EU directives that have affected Finland and Sweden, the most remarkable being the abolishment of the travellers’ import quotas for alcohol within the EU. Due to its position as a non-EU country Norway has been able to maintain high alcohol taxes without being subjected to a ”race to the bottom” regarding alcohol taxes the same way as Finland and Sweden. Finland distinguishes as the country that has liberalised its alcohol policy most during the study period. The changes in alcohol policies were not only induced by Europeanisation and the Single Market, but also by autonomous decision-making and political processes in the individual countries. Furthermore, the study shows that alcohol policy measures are implemented more widely in Europe than before and that there is a slow process of convergence going on regarding alcohol policy in Europe. Despite this, alcohol policies in the Nordic countries are still by far the strictest in all of Europe. From a Europeanisation perspective, the Nordic countries were clearly on the receiving end during the first two study phases (1994–2007), having more to adjust to rules from the EU and the Single Market than having success in uploading and shaping alcohol policy on the European and international field. During the third and final study phase (2008–2013), however, the Nordic countries have increasingly succeeded in contributing to shape the alcohol policy arena in the EU and also more widely through the WHOs global alcohol strategy. The restrictive Nordic policy tradition on which the current alcohol policies in Finland, Sweden and Norway were built on has still quite a solid evidence base. Although the basis of the restrictive alcohol policy has crumbled somewhat during the past twenty years and the policies have become less effective, nothing prevents it from being the base for alcohol policy in the Nordic countries even in the long term. In the future, all that is needed for an effective and successful alcohol policy is a solid evidence base, enough political will and support from the general public.

Employee layoff announcements and shareholder wealth: empirical evidence from Finland 2008-2013

This thesis investigates the short-term stock price reaction to layoff announcements in Finland. It also studies whether the characteristics of the firm or the layoff announcement have an impact on the stock market reaction. Standard event study methodology was utilized to examine the stock price reactions to layoffs and to test the created hypotheses. The event pool consisted of 102 publicly disclosed layoff announcements that were announced during the time period from June 2008 to December 2013. The empirical results show that the stock market reaction is strongly positive in the pre-event period of -10 to -1 with CAAR of 2,69%. The reaction is however slightly negative on the event date with AAR of -0,57%. Based on the results the conclusion is that either the managers are timing the markets or the layoffs are seen as efficiency improving acts and the market becomes aware of such actions pre-event. Additionally different characteristic hypotheses are tested to find out whether they would explain the reaction. The characteristics are: the reason stated by the management, business cycle, industry group, prior performance, leverage-ratio, the size of the company, the size of the layoff and the duration of the layoff.

Welding of additively manufactured stainless steel parts: Comparative study between sheet metal and selective laser melted parts

Additive manufacturing is a fast growing manufacturing technology capable of producing complex objects without the need for conventional manufacturing process planning. During the process the work piece is built by adding material one layer at a time according to a digital 3D CAD model. At first additive manufacturing was mainly used to make prototypes but the development of the technology has made it possible to also make final products. Welding is the most common joining method for metallic materials. As the maximum part size of additive manufacturing is often limited, it may sometimes be required to join two or more additively manufactured parts together. However there has been almost no research on the welding of additively manufactured parts so far, which means that there has been very little information available on the possible differences compared to the welding of sheet metal parts. The aim of this study was to compare the weld joint properties of additively manufactured parts to those of sheet metal parts. The welding process that was used was TIG welding and the test material was 316L austenitic stainless steel. Weld joint properties were studied by making tensile, bend and hardness tests and by studying the weld microstructures with a microscope. Results show that there are certain characteristics in the welds of additively manufactured parts. The building direction of the test pieces has some impact on the mechanical properties of the weld. Nevertheless all the welds exhibited higher yield strength than the sheet metal welds but at the same time elongation at break was lower. It was concluded that TIG welding is a feasible process for welding additively manufactured parts.