Two-dimensional drift-diffusion simulation of organic solar cells

The aim of this master's thesis is to develop a two-dimensional drift-di usion model, which describes charge transport in organic solar cells. The main bene t of a two-dimensional model compared to a one-dimensional one is the inclusion of the nanoscale morphology of the active layer of a bulk heterojunction solar cell. The developed model was used to study recombination dynamics at the donor-acceptor interface. In some cases, it was possible to determine e ective parameters, which reproduce the results of the two-dimensional model in the one-dimensional case. A summary of the theory of charge transport in semiconductors was presented and discussed in the context of organic materials. Additionally, the normalization and discretization procedures required to nd a numerical solution to the charge transport problem were outlined. The charge transport problem was solved by implementing an iterative scheme called successive over-relaxation. The obtained solution is given as position-dependent electric potential, free charge carrier concentrations and current densities in the active layer. An interfacial layer, separating the pure phases, was introduced in order to describe charge dynamics occurring at the interface between the donor and acceptor. For simplicity, an e ective generation of free charge carriers in the interfacial layer was implemented. The pure phases simply act as transport layers for the photogenerated charges. Langevin recombination was assumed in the two-dimensional model and an analysis of the apparent recombination rate in the one-dimensional case is presented. The recombination rate in a two-dimensional model is seen to e ectively look like reduced Langevin recombination at open circuit. Replicating the J-U curves obtained in the two-dimensional model is, however, not possible by introducing a constant reduction factor in the Langevin recombination rate. The impact of an acceptor domain in the pure donor phase was investigated. Two cases were considered, one where the acceptor domain is isolated and another where it is connected to the bulk of the acceptor. A comparison to the case where no isolated domains exist was done in order to quantify the observed reduction in the photocurrent. The results show that all charges generated at the isolated domain are lost to recombination, but the domain does not have a major impact on charge transport. Trap-assisted recombination at interfacial trap states was investigated, as well as the surface dipole caused by the trapped charges. A theoretical expression for the ideality factor n_id as a function of generation was derived and shown to agree with simulation data. When the theoretical expression was fitted to simulation data, no interface dipole was observed.

Effect of Noncondensable Gases on Circulation of Primary Coolant in Nuclear Power Plants in Abnormal Situations

The present study focuses on two effects of the presence of a noncondensable gas on the thermal-hydraulic behavior of thecoolant of the primary circuit of a nuclear reactor in the VVER-440 geometry inabnormal situations. First, steam condensation with the presence of air was studied in the horizontal tubes of the steam generator (SG) of the PACTEL test facility. The French thermal-hydraulic CATHARE code was used to study the heat transfer between the primary and secondary side in conditions derived from preliminary experiments performed by VTT using PACTEL. In natural circulation and single-phase vapor conditions, the injection of a volume of air, equivalent to the totalvolume of the primary side of the SG at the entrance of the hot collector, did not stop the heat transfer from the primary to the secondary side. The calculated results indicate that air is located in the second half-length (from the mid-length of the tubes to the cold collector) in all the tubes of the steam generator The hot collector remained full of steam during the transient. Secondly, the potential release of the nitrogen gas dissolved in the water of the accumulators of the emergency core coolant system of the Loviisa nuclear power plant (NPP) was investigated. The author implemented a model of the dissolution and release ofnitrogen gas in the CATHARE code; the model created by the CATHARE developers. In collaboration with VTT, an analytical experiment was performed with some components of PACTEL to determine, in particular, the value of the release time constant of the nitrogen gas in the depressurization conditions representative of the small and intermediate break transients postulated for the Loviisa NPP. Such transients, with simplified operating procedures, were calculated using the modified CATHARE code for various values of the release time constant used in the dissolution and release model. For the small breaks, nitrogen gas is trapped in thecollectors of the SGs in rather large proportions. There, the levels oscillate until the actuation of the low-pressure injection pumps (LPIS) that refill the primary circuit. In the case of the intermediate breaks, most of the nitrogen gas is expelled at the break and almost no nitrogen gas is trapped in the SGs. In comparison with the cases calculated without taking into account the release of nitrogen gas, the start of the LPIS is delayed by between 1 and 1.75 h. Applicability of the obtained results to the real safety conditions must take into accountthe real operating procedures used in the nuclear power plant.

Market Potential of Northwest Russia for Telemedicine Applications

The level of health care in Russia is mostly still below the western standards, but lately it has been developing quite positively. Many ICT solutions (telemedicine applications) have been developed for health care in Finland, but since the domestic market is so small, it’s necessary to expand to foreign markets to make the Finnish R&D projects more profitable. Telemedicine applications are not yet widely used in Russia, but since the health care system is going through fast changes, leapfrog effects can be expected and new modern applications and technologies will be implemented. This will open numerous business opportunities for Finnish technology developers. This thesis aims to be the first evaluation of the market and form an outlook of the health care system and telemedicine applications already utilized in Russia. The results of this study can be used for focusing further research ultimately aiming at technology implementation. The study showed that there is potential for many types of telemedicine solutions, e.g. electronic patient records and home monitoring systems; providing that further research in this field is needed.

Market Potential of Northwest Russia for Telemedicine Applications

The level of health care in Russia is mostly still below the western standards, but lately it has been developing quite positively. Many ICT solutions (telemedicine applications) have been developed for health care in Finland, but since the domestic market is so small, it’s necessary to expand to foreign markets to make the Finnish R&D projects more profitable. Telemedicine applications are not yet widely used in Russia, but since the health care system is going through fast changes, leapfrog effects can be expected and new modern applications and technologies will be implemented. This will open numerous business opportunities for Finnish technology developers. This thesis aims to be the first evaluation of the market and form an outlook of the health care system and telemedicine applications already utilized in Russia. The results of this study can be used for focusing further research ultimately aiming at technology implementation. The study showed that there is potential for many types of telemedicine solutions, e.g. electronic patient records and home monitoring systems; providing that further research in this field is needed.

Environmental inFluences on the Adoption of Open Innovation: Analysis of Structural, Institutional and Cultural Impacts

The concept of open innovation has recently gained widespread attention, and is particularly relevant now as many firms endeavouring to implement open innovation, face different sets of challenges associated with managing it. Prior research on open innovation has focused on the internal processes dealing with open innovation implementation and the organizational changes, already taking place or yet required in companies order to succeed in the global open innovation market. Despite the intensive research on open innovation, the question of what influences its adoption by companies in different contexts has not received much attention in studies. To fill this gap, this thesis contribute to the discussion on open innovation influencing factors by bringing in the perspective of environmental impacts, i.e. gathering data on possible sources of external influences, classifying them and testing their systemic impact through conceptual system dynamics simulation model. The insights from data collection and conceptualization in modelling are used to answer the question of how the external environment affects the adoption of open innovation. The thesis research is presented through five research papers reflecting the method triangulation based study (conducted at initial stage as case study, later as quantitative analysis and finally as system dynamics simulation). This multitude of methods was used to collect the possible external influence factors and to assess their impact (on positive/negative scale rather than numerical). The results obtained throughout the thesis research bring valuable insights into understanding of open innovation influencing factors inside a firm’s operating environment, point out the balance required in the system for successful open innovation performance and discover the existence of tipping point of open innovation success when driven by market dynamics and structures. The practical implications on how firms and policy-makers can leverage environment for their potential benefits are offered in the conclusions.

Potential and Challenges of Analog Reconfigurable Computation in Modern and Future CMOS

In this work, the feasibility of the floating-gate technology in analog computing platforms in a scaled down general-purpose CMOS technology is considered. When the technology is scaled down the performance of analog circuits tends to get worse because the process parameters are optimized for digital transistors and the scaling involves the reduction of supply voltages. Generally, the challenge in analog circuit design is that all salient design metrics such as power, area, bandwidth and accuracy are interrelated. Furthermore, poor flexibility, i.e. lack of reconfigurability, the reuse of IP etc., can be considered the most severe weakness of analog hardware. On this account, digital calibration schemes are often required for improved performance or yield enhancement, whereas high flexibility/reconfigurability can not be easily achieved. Here, it is discussed whether it is possible to work around these obstacles by using floating-gate transistors (FGTs), and analyze problems associated with the practical implementation. FGT technology is attractive because it is electrically programmable and also features a charge-based built-in non-volatile memory. Apart from being ideal for canceling the circuit non-idealities due to process variations, the FGTs can also be used as computational or adaptive elements in analog circuits. The nominal gate oxide thickness in the deep sub-micron (DSM) processes is too thin to support robust charge retention and consequently the FGT becomes leaky. In principle, non-leaky FGTs can be implemented in a scaled down process without any special masks by using “double”-oxide transistors intended for providing devices that operate with higher supply voltages than general purpose devices. However, in practice the technology scaling poses several challenges which are addressed in this thesis. To provide a sufficiently wide-ranging survey, six prototype chips with varying complexity were implemented in four different DSM process nodes and investigated from this perspective. The focus is on non-leaky FGTs, but the presented autozeroing floating-gate amplifier (AFGA) demonstrates that leaky FGTs may also find a use. The simplest test structures contain only a few transistors, whereas the most complex experimental chip is an implementation of a spiking neural network (SNN) which comprises thousands of active and passive devices. More precisely, it is a fully connected (256 FGT synapses) two-layer spiking neural network (SNN), where the adaptive properties of FGT are taken advantage of. A compact realization of Spike Timing Dependent Plasticity (STDP) within the SNN is one of the key contributions of this thesis. Finally, the considerations in this thesis extend beyond CMOS to emerging nanodevices. To this end, one promising emerging nanoscale circuit element - memristor - is reviewed and its applicability for analog processing is considered. Furthermore, it is discussed how the FGT technology can be used to prototype computation paradigms compatible with these emerging two-terminal nanoscale devices in a mature and widely available CMOS technology.