Logistiikkayrityksen sijoittuminen Venäjälle - Venäjän logistiikkasektori ja potentiaaliset sijoittumiskohteet

Venäjän voimakas talouskasvu on lisännyt merkittävästi myös logistiikkapalveluiden kysyntää maassa. Suuren pinta-alan, markkinapotentiaalin ja Euroopan ja Aasian välisen maantieteellisen sijainnin tarjoaman merkittävän kauttakulkupotentiaalin ansiosta Venäjä on erityisen kiinnostava investointikohde logistiikkayrityksille. Talouskasvu ei ole kuitenkaan jakautunut tasaisesti ja tämän vuoksi investoijan onkin syytä tarkoin selvittää minne Venäjän sisällä sijoittua. Tässä työssä on kartoitettu Venäjän logistiikkasektoria ja liikenneinfrastruktuuria sekä tarkasteltu kilpailutilannetta tavoitteena löytää logistiikkayrityksellekeskeisimmät sijaintikohteet Venäjällä. Moskova ja Pietari on rajattu tutkimuksen ulkopuolelle. Alan kirjallisuuteen ja aiheesta aiemmin laadittuihin tutkimuksiin perehtymällä on selvitetty yritysten sijaintipaikanvalinnalle asettamat tärkeimmät kriteerit. Logistiikkayrityksille toimivalla infrastruktuurilla on luonnollisesti oleellinen merkitys sijaintipaikkaa valittaessa, riittävän suuren markkinapotentiaalin ollessa toinen erittäin merkittävä kriteeri. Kirjallisuustarkastelun pohjalta potentiaalisiksi kohteiksi logistiikkayritykselle valikoitui 22 kaupunkia eri puolilta Venäjää. Monikriteerianalyysiin perustuvan pisteytysmenetelmän avulla toteutetussa potentiaalisten kohteiden luokittelussa kiinnostavimmiksi sijoittumiskohteiksi kohosivat Etelä-Venäjällä, Mustanmeren rannikolla sijaitsevat merkittävät satamakaupungit. Kehittyneen infrastruktuurin, merkittävän markkinapotentiaalin sekä suotuisten taloudellisten toimintaedellytysten ansiosta tarjoavat nämä erityisen merkittävän investointipotentiaalin logistiikkayrityksille.

Exploring the strategic impact of technological change - Studies on the role of Internet in magazine publishing

Over the past few decades, turbulent change has characterized the situation in the media industry. It has been noted that digitalization and new media are strongly influencing the industry: it is changing the existing market dynamics and requires new strategies. Prior research on the impact of digitalization and the Internet has emphasized news-focused media such as newspaper publishing and broadcasting, yet magazine publishing is very seldom the focus of the research. This study examines how the Internetimpacts magazine publishing. The work presents a multi-level analysis on the role and impact of the Internet on magazine products, companies and industry. The study is founded on strategic management, technology management and media economics literature. This study consists of two parts. The first part introduces the research topic and discusses the overall results of the study. The second part comprises five research publications. Qualitative research methods are used throughout. The results of the study indicate that the Internet has not had a disruptive effect on magazine publishing, and that its strategic implications could rather be considered complementary to the print magazine and the business as a whole. It seems that the co-specialized assets, together with market-related competencies and unchanged core competence have protected established firms from the disruptive effect of the new technology in magazine publishing. In addition, it seems that the Internet offers a valuable possibility to build and nourish customer relationships. The study contributes tomedia management and economics research by moving from product- or industry-level investigations towards a strategic-management perspective.

Intercultural bridges in teenagers' theatrical events : performing self and constructing cultural identity through a creative drama process

The overriding aim of this drama educational case study is to deepen the understanding of meaning making in a creative intercultural youth theatre process and to examine it in the context of the 10th European Children's TheatreEncounter. The research task is to give a theoretical description of some key features of a creative drama process as the basis for theory about meaning makingin physical theatre. The first task is to illuminate the culture-historical connections of the multilayered practice of the EDERED-association. The second taskis to analyse and interpret theatrical meaning making. The ethnographical research site is regarded as a theatrical event. The analysis of the theatrical eventis divided into four segments: cultural contexts, contextual theatricality, theatrical playing and playing culture. These segments are connected with four research questions: What are the cultural contexts of a creative drama process? How can the organisation of the Encounter, genres, aesthetic codes and perception ofcodes be seen to influence the lived experiences of the participants? What are some of the key phases and characteristics in a creative practice? What kind of cultural learning can be interpreted from the performance texts? The interpretative question concerns identity and community (re)construction. How are the categories, `community´ and `child´ constructed in the Encounter culture? In this drama educational case study the research material (transcribed interviews, coded questionnaire answers, participant drawings, videotaped process text and performance texts) are examined in a multi-method analysis in the meta-theoretical framework of Dewey's naturalistic pragmatism. A three-dimensional research interest through a combination of lived experiences, social contexts and cultural-aesthetical practices compared with drama-educational practices required the methodological project of cultural studies. Furthermore, the critical interpretation of cultural texts is divided into three levels of analyses which are called description, structural analysis and theoretical interpretation. Dialogic validity (truthfulness, self-reflexivity and polyvocality) is combined with contextual validity (sensitivity to social context and awareness of historicity) and with deconstructive validity (awareness of the social discourses). My research suggests that itis possible, by means of physical theatre, to construct symbolic worlds where questions about intercultural identity and multilingual community are examined and where provisional answers are constructed in social interaction.

The Influence of Network Competence on Internationalization of SMEs

This study focuses on the relationship between organizational network competence and the internationalization process of small- and medium sized enterprises (SMEs). Over recent decades, the global business environment has become increasingly conducive to internationalization of small firms. A central facilitating factor in the process has been the emergence of networked business relationships between internationalizing firms. Research on SME internationalization has found that certain types of structures and dynamics of business networks allow SMEs access to the resources they need to enter foreign markets. This consequently means that their internationalization often becomes to depend on the networks they are embedded in. However, research so far has mostly ignored the possibility that the organizational ability to develop and manage business network relationships, network competence, may be a major underlying factor in determining how well SMEs can leverage their network relationships to enter foreign markets and consequently may determine in large part how successful their internationalization process turns out to be. This study aims to respond to those gaps, by empirically examining how the development of network competence in internationalizing SMEs influences the internationalization outcomes that they can expect, and how such network competence is conceptualized and developed. Using a mixed methods approach, survey data collected from 298 Finnish SMEs across five industry sectors is first used to examine how levels of network competence are related to internationalization propensity of SMEs and their subsequent international performance, growth and profitability as internationally operating firms. In order to illustrate in more detail the ways in which network competence is conceptualized and how it develops during the internationalization process of an SME, qualitative data from internationally operating Finnish SMEs are used. Longitudinal interview data of an internationalizing Finnish SME is accompanied by data gathered through a series of semistructured interviews of Finnish and Russian managers involved in mutual business relationship dyads. Structurally, this thesis examines the research issue as an article-based dissertation, consisting of five journal and conference publications. Three of these publications are based on the quantitative data, and the remaining two apply the qualitative interview data. The results find several aspects where network competence has a positive influence on the success of internationalizing SMEs, how it develops and what it entails conceptually in this context. Quantitatively, the level of network competence is found to have a positive relationship to various internationalization outcomes, including the propensity of SMEs to enter foreign markets and on their subsequent international performance, their growth and their profitability. Additionally, the positive relationship is divided between the relationship-specific and cross-relational dimension of network competence, in that the influence of the former is relevant for the propensity to internationalize, while the latter is for the growth and profitability of the already internationalized SMEs. Qualitatively, the results suggest, firstly, that the development process of network competence does not necessarily precede the start of the internationalization process, but may occur through a gradual learning process alongside it. And secondly, the results also imply that the conceptualization of network competence by Finnish managers of internationally operating Finnish SMEs is structurally distinct from that of their culturally distinct partner managers in Russia. This study contributes to the literature on SME internationalization in several ways. Firstly, it introduces operationalized organizational competencies to the literature on internationalization of SMEs, which has so far mainly examined the influence of business networking on the internationalization process without having such an organizational viewpoint. Furthermore, this study provides a multi-level analysis of the determinants of successful SME internationalization, by examining various strategic and performance outcomes across the process. These results also contribute to the literature on organizational strategy of internationalizing SMEs, by clarifying how different dimensions of business networking may be optimal in different phases of the internationalization process. Conceptually, the results of this study contribute to the literature on competence development and SME internationalization, by illustrating how the development process of network competence may occur during internationalization process. Thus, they also contribute to the discussion on how SMEs are able to influence the dynamics and structures of their business networks over time. Finally, this study contributes to the literature on the role of culture in the internationalization process, by implying that the cultural background of the manager of the SME may determine whether business networking and network competence is seen as an organizational-level or an individual level capability. The study also includes some additional contributions to the literature on dynamic capabilities in strategic management, and on that of strategic business networks. These include further clarifying the exact nature and tangibility of dynamic capabilities, and being one of the first studies to introduce constructs from both dynamic capabilities and business network literature to the field of international entrepreneurship. And finally, the study also has some contribution on the two streams of literature, in illustrating how both dyadic and network-level capabilities may be relevant, depending on the current strategic goals and market position of the firm. Keywords: network competence, internationalizatio

Very High Energy Gamma-Rays emitting BL LAC's Population Study

Context: BL Lacs are the most numerous extragalactic objects which are detected in Very High Energy (VHE) gamma-rays band. They are a subclass of blazars. Large flux variability amplitude, sometimes happens in very short time scale, is a common characteristic of them. Significant optical polarization is another main characteristics of BL Lacs. BL Lacs' spectra have a continuous and featureless Spectral Energy Distribution (SED) which have two peaks. Among 1442 BL Lacs in the Roma-BZB catalogue, only 51 are detected in VHE gamma-rays band. BL Lacs are most numerous (more than 50% of 514 objects) objects among the sources that are detected above 10 GeV by FERMI-LAT. Therefore, many BL Lacs are expected to be discovered in VHE gamma-rays band. However, due to the limitation on current and near future technology of Imaging Air Cherenkov Telescope, astronomers are forced to predict whether an object emits VHE gamma-rays or not. Some VHE gamma-ray prediction methods are already introduced but still are not confirmed. Cross band correlations are the building blocks of introducing VHE gamma-rays prediction method. Aims: We will attempt to investigate cross band correlations between flux energy density, luminosity and spectral index of the sample. Also, we will check whether recently discovered MAGIC J2001+435 is a typical BL Lac. Methods: We select a sample of 42 TeV BL Lacs and collect 20 of their properties within five energy bands from literature and Tuorla blazar monitoring program database. All of the data are synchronized to be comparable to each other. Finally, we choose 55 pair of datasets for cross band correlations finding and investigating whether there is any correlation between each pair. For MAGIC J2001+435 we analyze the publicly available SWIFT-XRT data, and use the still unpublished VHE gamma-rays data from MAGIC collaboration. The results are compared to the other sources of the sample. Results: Low state luminosity of multiple detected VHE gamma-rays is strongly correlated luminosities in all other bands. However, the high state does not show such strong correlations. VHE gamma-rays single detected sources have similar behaviour to the low state of multiple detected ones. Finally, MAGIC J2001+435 is a typical TeV BL Lac. However, for some of the properties this source is located at the edge of the whole sample (e.g. in terms of X-rays flux). Keywords: BL Lac(s), Population study, Correlations finding, Multi wavelengths analysis, VHE gamma-rays, gamma-rays, X-rays, Optical, Radio

Detecting Deceit – Guessing or Assessing? Study on the Applicability of Veracity Assessment Methods in Human Intelligence

Intelligence from a human source, that is falsely thought to be true, is potentially more harmful than a total lack of it. The veracity assessment of the gathered intelligence is one of the most important phases of the intelligence process. Lie detection and veracity assessment methods have been studied widely but a comprehensive analysis of these methods’ applicability is lacking. There are some problems related to the efficacy of lie detection and veracity assessment. According to a conventional belief an almighty lie detection method, that is almost 100% accurate and suitable for any social encounter, exists. However, scientific studies have shown that this is not the case, and popular approaches are often over simplified. The main research question of this study was: What is the applicability of veracity assessment methods, which are reliable and are based on scientific proof, in terms of the following criteria? o Accuracy, i.e. probability of detecting deception successfully o Ease of Use, i.e. easiness to apply the method correctly o Time Required to apply the method reliably o No Need for Special Equipment o Unobtrusiveness of the method In order to get an answer to the main research question, the following supporting research questions were answered first: What kinds of interviewing and interrogation techniques exist and how could they be used in the intelligence interview context, what kinds of lie detection and veracity assessment methods exist that are reliable and are based on scientific proof and what kind of uncertainty and other limitations are included in these methods? Two major databases, Google Scholar and Science Direct, were used to search and collect existing topic related studies and other papers. After the search phase, the understanding of the existing lie detection and veracity assessment methods was established through a meta-analysis. Multi Criteria Analysis utilizing Analytic Hierarchy Process was conducted to compare scientifically valid lie detection and veracity assessment methods in terms of the assessment criteria. In addition, a field study was arranged to get a firsthand experience of the applicability of different lie detection and veracity assessment methods. The Studied Features of Discourse and the Studied Features of Nonverbal Communication gained the highest ranking in overall applicability. They were assessed to be the easiest and fastest to apply, and to have required temporal and contextual sensitivity. The Plausibility and Inner Logic of the Statement, the Method for Assessing the Credibility of Evidence and the Criteria Based Content Analysis were also found to be useful, but with some limitations. The Discourse Analysis and the Polygraph were assessed to be the least applicable. Results from the field study support these findings. However, it was also discovered that the most applicable methods are not entirely troublefree either. In addition, this study highlighted that three channels of information, Content, Discourse and Nonverbal Communication, can be subjected to veracity assessment methods that are scientifically defensible. There is at least one reliable and applicable veracity assessment method for each of the three channels. All of the methods require disciplined application and a scientific working approach. There are no quick gains if high accuracy and reliability is desired. Since most of the current lie detection studies are concentrated around a scenario, where roughly half of the assessed people are totally truthful and the other half are liars who present a well prepared cover story, it is proposed that in future studies lie detection and veracity assessment methods are tested against partially truthful human sources. This kind of test setup would highlight new challenges and opportunities for the use of existing and widely studied lie detection methods, as well as for the modern ones that are still under development.

New directions in Stochastic Multicriteria Acceptability Analysis

Decisions taken in modern organizations are often multi-dimensional, involving multiple decision makers and several criteria measured on different scales. Multiple Criteria Decision Making (MCDM) methods are designed to analyze and to give recommendations in this kind of situations. Among the numerous MCDM methods, two large families of methods are the multi-attribute utility theory based methods and the outranking methods. Traditionally both method families require exact values for technical parameters and criteria measurements, as well as for preferences expressed as weights. Often it is hard, if not impossible, to obtain exact values. Stochastic Multicriteria Acceptability Analysis (SMAA) is a family of methods designed to help in this type of situations where exact values are not available. Different variants of SMAA allow handling all types of MCDM problems. They support defining the model through uncertain, imprecise, or completely missing values. The methods are based on simulation that is applied to obtain descriptive indices characterizing the problem. In this thesis we present new advances in the SMAA methodology. We present and analyze algorithms for the SMAA-2 method and its extension to handle ordinal preferences. We then present an application of SMAA-2 to an area where MCDM models have not been applied before: planning elevator groups for high-rise buildings. Following this, we introduce two new methods to the family: SMAA-TRI that extends ELECTRE TRI for sorting problems with uncertain parameter values, and SMAA-III that extends ELECTRE III in a similar way. An efficient software implementing these two methods has been developed in conjunction with this work, and is briefly presented in this thesis. The thesis is closed with a comprehensive survey of SMAA methodology including a definition of a unified framework.

R&D Performance Analysis: Case Studies on the Challenges and Promotion of the Evaluation and Measurement of R&D

Due to the intense international competition, demanding, and sophisticated customers, and diverse transforming technological change, organizations need to renew their products and services by allocating resources on research and development (R&D). Managing R&D is complex, but vital for many organizations to survive in the dynamic, turbulent environment. Thus, the increased interest among decision-makers towards finding the right performance measures for R&D is understandable. The measures or evaluation methods of R&D performance can be utilized for multiple purposes; for strategic control, for justifying the existence of R&D, for providing information and improving activities, as well as for the purposes of motivating and benchmarking. The earlier research in the field of R&D performance analysis has generally focused on either the activities and considerable factors and dimensions - e.g. strategic perspectives, purposes of measurement, levels of analysis, types of R&D or phases of R&D process - prior to the selection of R&Dperformance measures, or on proposed principles or actual implementation of theselection or design processes of R&D performance measures or measurement systems. This study aims at integrating the consideration of essential factors anddimensions of R&D performance analysis to developed selection processes of R&D measures, which have been applied in real-world organizations. The earlier models for corporate performance measurement that can be found in the literature, are to some extent adaptable also to the development of measurement systemsand selecting the measures in R&D activities. However, it is necessary to emphasize the special aspects related to the measurement of R&D performance in a way that make the development of new approaches for especially R&D performance measure selection necessary: First, the special characteristics of R&D - such as the long time lag between the inputs and outcomes, as well as the overall complexity and difficult coordination of activities - influence the R&D performance analysis problems, such as the need for more systematic, objective, balanced and multi-dimensional approaches for R&D measure selection, as well as the incompatibility of R&D measurement systems to other corporate measurement systems and vice versa. Secondly, the above-mentioned characteristics and challenges bring forth the significance of the influencing factors and dimensions that need to be recognized in order to derive the selection criteria for measures and choose the right R&D metrics, which is the most crucial step in the measurement system development process. The main purpose of this study is to support the management and control of the research and development activities of organizations by increasing the understanding of R&D performance analysis, clarifying the main factors related to the selection of R&D measures and by providing novel types of approaches and methods for systematizing the whole strategy- and business-based selection and development process of R&D indicators.The final aim of the research is to support the management in their decision making of R&D with suitable, systematically chosen measures or evaluation methods of R&D performance. Thus, the emphasis in most sub-areas of the present research has been on the promotion of the selection and development process of R&D indicators with the help of the different tools and decision support systems, i.e. the research has normative features through providing guidelines by novel types of approaches. The gathering of data and conducting case studies in metal and electronic industry companies, in the information and communications technology (ICT) sector, and in non-profit organizations helped us to formulate a comprehensive picture of the main challenges of R&D performance analysis in different organizations, which is essential, as recognition of the most importantproblem areas is a very crucial element in the constructive research approach utilized in this study. Multiple practical benefits regarding the defined problemareas could be found in the various constructed approaches presented in this dissertation: 1) the selection of R&D measures became more systematic when compared to the empirical analysis, as it was common that there were no systematic approaches utilized in the studied organizations earlier; 2) the evaluation methods or measures of R&D chosen with the help of the developed approaches can be more directly utilized in the decision-making, because of the thorough consideration of the purpose of measurement, as well as other dimensions of measurement; 3) more balance to the set of R&D measures was desired and gained throughthe holistic approaches to the selection processes; and 4) more objectivity wasgained through organizing the selection processes, as the earlier systems were considered subjective in many organizations. Scientifically, this dissertation aims to make a contribution to the present body of knowledge of R&D performance analysis by facilitating dealing with the versatility and challenges of R&D performance analysis, as well as the factors and dimensions influencing the selection of R&D performance measures, and by integrating these aspects to the developed novel types of approaches, methods and tools in the selection processes of R&D measures, applied in real-world organizations. In the whole research, facilitation of dealing with the versatility and challenges in R&D performance analysis, as well as the factors and dimensions influencing the R&D performance measure selection are strongly integrated with the constructed approaches. Thus, the research meets the above-mentioned purposes and objectives of the dissertation from the scientific as well as from the practical point of view.

Railway Wagon Market Analysis and New Multi-Purpose Wagon Solution for Freight Transports - Finnish Manufacturing Perspective

Rautateillä käytettävät tavaravaunut ovat vanhenemassa hyvin nopeasti; tämä koskee niin Venäjää, Suomea, Ruotsia kuin laajemminkin Eurooppaa. Venäjällä ja Euroopassa on käytössä runsaasti vaunuja, jotka ovat jo ylittäneet niille suositeltavan käyttöiän. Silti niitä käytetään kuljetuksissa, kun näitä korvaavia uusia vaunuja ei ole tarpeeksi saatavilla. Uusimmat vaunut ovat yleensä vaunuja vuokraavien yritysten tai uusien rautatieoperaattorien hankkimia - tämä koskee erityisesti Venäjää, jossa vaunuvuokraus on noussut erittäin suosituksi vaihtoehdoksi. Ennusteissa kerrotaan vaunupulan kasvavan ainakin vuoteen 2010 saakka. Jos rautateiden suosio rahtikuljetusmuotona kasvaa, niin voimistuva vaunukysyntä jatkuu huomattavan paljon pidemmän aikaa. Euroopan ja Venäjän vaunukannan tilanne näkyy myös sitä palvelevan konepajateollisuuden ongelmina - yleisesti ottaen alan eurooppalaiset yritykset ovat heikosti kannattavia ja niiden liikevaihto ei juuri kasva, venäläiset ja ukrainalaiset yritykset ovat olleet samassa tilanteessa, joskin aivan viime vuosina tilanne on osassa kääntynyt paremmaksi. Kun näiden maanosien yritysten liikevaihtoa, voittoa ja omistaja-arvoa verrataan yhdysvaltalaisiin kilpailijoihin, huomataan että jälkimmäisten suoriutuminen on huomattavan paljon parempaa, ja näillä yrityksillä on myös kyky maksaa osinkoja omistajilleen. Tutkimuksen tarkoituksena oli kehittää uuden tyyppinen kuljetusvaunu Suomen, Venäjän sekä mahdollisesti myös Kiinan väliseen liikenteeseen. Vaunutyypin tarkoituksena olisi kyetä toimimaan monikäyttöisenä, niin raaka-aineiden kuin konttienkin kuljetuksessa, tasapainottaen kuljetusmuotojen aiheuttamaa kuljetuspaino-ongelmaa. Kehitystyön pohjana käytimme yli 1000 venäläisen vaunutyypin tietokantaa, josta valitsimme Data Envelopment Analysis -menetelmällä soveliaimmat vaunut kontinkuljetukseen (lähemmin tarkastelimme n. 40 vaunutyyppiä), jättäen mahdollisimman vähän tyhjää tilaa junaan, mutta silti kyeten kantamaan valitun konttilastin. Kun kantokykyongelmia venäläisissä vaunuissa ei useinkaan ole, on vertailu tehtävissä tavarajunan pituuden ja kokonaispainon perusteella. Simuloituamme yhdistettyihin kuljetuksiin soveliasta vaunutyyppiä käytännössä löytyvässä kuljetusverkostossa (esim. raakapuuta Suomeen tai Kiinaan ja kontteja takaisin Venäjän suuntaan), huomasimme lyhemmän vaunupituuden sisältävän kustannusetua, erityisesti raakaainekuljetuksissa, mutta myös rajanylityspaikkojen mahdollisesti vähentyessä. Lyhempi vaunutyyppi on myös joustavampi erilaisten konttipituuksien suhteen (40 jalan kontin käyttö on yleistynyt viime vuosina). Työn lopuksi ehdotamme uuden vaunutyypin tuotantotavaksi verkostomaista lähestymistapaa, jossa osa vaunusta tehtäisiin Suomessa ja osa Venäjällä ja/tai Ukrainassa. Vaunutyypin tulisi olla rekisteröity Venäjälle, sillä silloin sitä voi käyttää Suomen ja Venäjän, kuten myös soveltuvin osin Venäjän ja Kiinan välisessä liikenteessä.

Fatigue analysis of brackets with and without scallop for bridge and other deck structure using effective notch stress.

Due to functional requirement of a structural detail brackets with and without scallop are frequently used in bridges, decks, ships and offshore structure. Scallops are designed to serve as passage way for fluids, to reduce weld length and plate distortions. Moreover, scallops are used to avoid intersection of two or more welds for the fact that there is the presence of inventible inherent initial crack except for full penetrated weld and the formation of multi-axial stress state at the weld intersection. Welding all around the scallop corner increase the possibility of brittle fracture even for the case the bracket is not loaded by primary load. Avoiding of scallop will establish an initial crack in the corner if bracket is welded by fillet welds. If the two weld run pass had crossed, this would have given a 3D residual stress situation. Therefore the presences and absence of scallop necessitates the 3D FEA fatigue resistance of both types of brackets using effective notch stress approach ( ). FEMAP 10.1 with NX NASTRAN was used for the 3D FEA. The first and main objective of this research was to investigate and compare the fatigue resistance of brackets with and without scallop. The secondary goal was the fatigue design of scallops in case they cannot be avoided for some reason. The fatigue resistance for both types of brackets was determined based on approach using 1 mm fictitiously rounded radius based on IIW recommendation. Identical geometrical, boundary and loading conditions were used for the determination and comparison of fatigue resistance of both types of brackets using linear 3D FEA. Moreover the size effect of bracket length was also studied using 2D SHELL element FEA. In the case of brackets with scallop the flange plate weld toe at the corner of the scallop was found to exhibit the highest and made the flange plate weld toe critical for fatigue failure. Whereas weld root and weld toe at the weld intersections were the highly stressed location for brackets without scallop. Thus weld toe for brackets with scallop, and weld root and weld toe for brackets without scallop were found to be the critical area for fatigue failure. Employing identical parameters on both types of brackets, brackets without scallop had the highest except for full penetrated weld. Furthermore the fatigue resistance of brackets without scallop was highly affected by the lack of weld penetration length and it was found out that decreased as the weld penetration was increased. Despite the fact that the very presence of scallop reduces the stiffness and also same time induce stress concentration, based on the 3D FEA it is worth concluding that using scallop provided better fatigue resistance when both types of brackets were fillet welded. However brackets without scallop had the highest fatigue resistance when full penetration weld was used. This thesis also showed that weld toe for brackets with scallop was the only highly stressed area unlike brackets without scallop in which both weld toe and weld root were the critical locations for fatigue failure when different types of boundary conditions were used. Weld throat thickness, plate thickness, scallop radius, lack of weld penetration length, boundary condition and weld quality affected the fatigue resistance of both types of brackets. And as a result, bracket design procedure, especially welding quality and post weld treatment techniques significantly affect the fatigue resistance of both type of brackets.

Innovation in a Non-Formal Adult Education Organisation – Multi-Case Study in Four Adult Education Centres

More than ever, education organisations are experiencing the need to develop new services and processes to satisfy expanding and changing customer needs and to adapt to the environmental changes and continually tightening economic situation. Innovation has been found in many studies to have a crucial role in the success of an organisation, both in the private and public sectors, in formal education and in manufacturing and services alike. However, studies concerning innovation in non-formal adult education organisations, such as adult education centres (AECs) in Finland, are still lacking. This study investigates innovation in the non-formal adult education organisation context from the perspective of organisational culture types and social networks. The objective is to determine the significant characteristics of an innovative non-formal adult education organisation. The analysis is based on data from interviews with the principals and fulltime staff of four case AECs. Before the case study, a pre-study phase is accomplished in order to obtain a preliminary understanding of innovation at AECs. The research found strong support for the need of innovation in AECs. Innovation is basically needed to accomplish the AEC system’s primary mission mentioned in the ACT on Liberal Adult Education. In addition, innovation is regarded vital to institutes and may prevent their decline. It helps the institutes to be more attractive, to enter new market, to increase customer satisfaction and to be on the cutting edge. Innovation is also seen as a solution to the shortage of resources. Innovative AECs search actively for additional resources for development work through project funding and subsidies, cooperation networks and creating a conversational and joyful atmosphere in the institute. The findings also suggest that the culture type that supports innovation at AECs is multidimensional, with an emphasis on the clan and adhocratic culture types and such values as: dynamism, future orientation, acquiring new resources, mistake tolerance, openness, flexibility, customer orientation, a risk-taking attitude, and community spirit. Active and creative internal and external cooperation also promote innovation at AECs. This study also suggests that the behaviour of a principal is crucial. The way he or she shows appreciation the staff, encouragement and support to the staff and his or her approachability and concrete participation in innovation activities have a strong effect on innovation attitudes and activities in AECs.

Influence of multi-phase phenomena on semibatch crystallization processes of aqueous solutions

Crystal properties, product quality and particle size are determined by the operating conditions in the crystallization process. Thus, in order to obtain desired end-products, the crystallization process should be effectively controlled based on reliable kinetic information, which can be provided by powerful analytical tools such as Raman spectrometry and thermal analysis. The present research work studied various crystallization processes such as reactive crystallization, precipitation with anti-solvent and evaporation crystallization. The goal of the work was to understand more comprehensively the fundamentals, phenomena and utilizations of crystallization, and establish proper methods to control particle size distribution, especially for three phase gas-liquid-solid crystallization systems. As a part of the solid-liquid equilibrium studies in this work, prediction of KCl solubility in a MgCl2-KCl-H2O system was studied theoretically. Additionally, a solubility prediction model by Pitzer thermodynamic model was investigated based on solubility measurements of potassium dihydrogen phosphate with the presence of non-electronic organic substances in aqueous solutions. The prediction model helps to extend literature data and offers an easy and economical way to choose solvent for anti-solvent precipitation. Using experimental and modern analytical methods, precipitation kinetics and mass transfer in reactive crystallization of magnesium carbonate hydrates with magnesium hydroxide slurry and CO2 gas were systematically investigated. The obtained results gave deeper insight into gas-liquid-solid interactions and the mechanisms of this heterogeneous crystallization process. The research approach developed can provide theoretical guidance and act as a useful reference to promote development of gas-liquid reactive crystallization. Gas-liquid mass transfer of absorption in the presence of solid particles in a stirred tank was investigated in order to gain understanding of how different-sized particles interact with gas bubbles. Based on obtained volumetric mass transfer coefficient values, it was found that the influence of the presence of small particles on gas-liquid mass transfer cannot be ignored since there are interactions between bubbles and particles. Raman spectrometry was successfully applied for liquid and solids analysis in semi-batch anti-solvent precipitation and evaporation crystallization. Real-time information such as supersaturation, formation of precipitates and identification of crystal polymorphs could be obtained by Raman spectrometry. The solubility prediction models, monitoring methods for precipitation and empirical model for absorption developed in this study together with the methodologies used gives valuable information for aspects of industrial crystallization. Furthermore, Raman analysis was seen to be a potential controlling method for various crystallization processes.