On the effects of welding parameters on weld quality of plasma arc keyhole welding of structural steels

The possibility and the usefulness of applying plasma keyhole welding to structural steels with different compositions and material thicknesses, and in various welding positions has been examinated. Single pass butt welding with I groove in flat, horizontal vertical and vertical positions and root welding with V , Y and U grooves of thick plate material in flat position have been studied and the welds with high quality has been obtained. The technological conditions for successful welding are presented. The single and interactive effects of welding parameters on weld quality, especially on surface weld defects, geometrical form errors, internal defects and mechanical properties (strength, ductility, impact toughness, hardness and bendability) of weld joint, are presented. Welding parameter combinations providing the best quality welds are also presented.

The effects of real time control of welding parameters on weld quality in plasma arc keyhole welding

Joints intended for welding frequently show variations in geometry and position, for which it is unfortunately not possible to apply a single set of operating parameters to ensure constant quality. The cause of this difficulty lies in a number of factors, including inaccurate joint preparation and joint fit up, tack welds, as well as thermal distortion of the workpiece. In plasma arc keyhole welding of butt joints, deviations in the gap width may cause weld defects such as an incomplete weld bead, excessive penetration and burn through. Manual adjustment of welding parameters to compensate for variations in the gap width is very difficult, and unsatisfactory weld quality is often obtained. In this study a control system for plasma arc keyhole welding has been developed and used to study the effects of the real time control of welding parameters on gap tolerance during welding of austenitic stainless steel AISI 304L. The welding tests demonstrated the beneficial effect of real time control on weld quality. Compared with welding using constant parameters, the maximum tolerable gap width with an acceptable weld quality was 47% higher when using the real time controlled parameters for a plate thickness of 5 mm. In addition, burn through occurred with significantly larger gap widths when parameters were controlled in real time. Increased gap tolerance enables joints to be prepared and fit up less accurately, saving time and preparation costs for welding. In addition to the control system, a novel technique for back face monitoring is described in this study. The test results showed that the technique could be successfully applied for penetration monitoring when welding non magnetic materials. The results also imply that it is possible to measure the dimensions of the plasma efflux or weld root, and use this information in a feedback control system and, thus, maintain the required weld quality.

Cognitively Empowering Internet-Based Patient Education for Ambulatory Orthopaedic Surgery Patients

Tiedollista voimavaraistumista tukeva internet-perustainen ohjaus päiväkirurgisille ortopedisille potilaille Tutkimuksen tarkoituksena oli kehittää tiedollista voimavaraistumista tukeva Internetperustainen potilasohjausohjelma sekä arvioida sitä. Tutkimusprosessi jaettiin kahteen vaiheeseen. Ensimmäisessä vaiheessa luotiin sisältö tiedollista voimavaraistumista tukevalle Internet-perustaiselle ohjaukselle päiväkirurgisia ortopedisia potilaita varten. Toisessa vaiheessa arvioitiin Internet-perustaisen ohjauksen (koeryhmä) hyväksyttävyyttä käyttäjien arvioimana ja ohjauksen tuloksia sekä verrattiin Internet-perustaisen ohjauksen (koeryhmä) tuloksia tiedollisesti voimavaraistumista tukevan sairaanhoitajan välittämään ohjauksen (kontrolliryhmä) tuloksiin. Tutkimuksen tavoitteena oli luoda uusi potilasohjausmuoto joka tarjoaa yksilöllisen, osallistavan ja aikaan ja paikkaan sitomattoman ohjauksen päiväkirurgiseen ortopediseen leikkaukseen tulevalle potilaalle. Tutkimuksen ensimmäisessä vaiheessa käytettiin kuvailevaa ja vertailevaa tutkimusmenetelmää (ennen ja jälkeen testaus). Tutkimukseen osallistui 120 päiväkirurgista ortopedista potilasta joiden tiedon odotuksia ja heille välitettyä tietoa tarkasteltiin. Tutkimuksen ensimmäisen vaiheen tuloksien ja aikaisemman voimavaraistumista käsittävän tiedon perusteella luotiin sisältö tiedollista voimavaraistumista tukevalle Internet-perustaiselle ohjaukselle. Sisältö rakentui voimavaraistavan tiedon kuudesta eri osa-alueesta. Tutkimuksen toisessa vaiheessa käytettiin randomoitua kokeellista tutkimusasetelmaa. Päiväkirurgiseen ortopediseen leikkaukseen tulevat potilaat randomoitiin koeryhmään (n=72) Internetperustaiseen ohjaukseen ja kontrolliryhmään (n=75) sairaanhoitajan välittämään ohjaukseen. Aineisto kerättiin strukturoitujen mittareiden avulla ja tulokset analysoitiin tilastollisesti. Tutkimuksen tulokset osoittavat, että kehitettyä tiedollisesti voimavaraistumista tukevaa Internet-perustaista potilasohjausmenetelmää voidaan suositella käytettäväksi ortopedisten päiväkirurgisten potilaiden ohjauksessa ja potilailla on hyvät mahdollisuudet voimavaraistua tiedollisesti sen avulla. Monipuolista tietoa sisältävä Internet-perustainen ohjaus osoittautui käyttäjien näkökulmasta hyväksyttäväksi. Vaikka Internet ohjauksen hyväksyttävyys koettiin osittain heikommaksi kuin sairaanhoitajan välittämän ohjauksen, potilaat käyttivät nettisivustoa ongelmitta ja arvioivat sen helppokäyttöiseksi. Ohjausmuodolla ei ollut vaikutusta hoidosta aiheutuneisiin kustannuksiin. Sen sijaan kustannuksista organisaatiolle voitiin puolittaa sairaanhoitajan ohjaukseen käyttämä aika Internet-perustaisen ohjauksen avulla. Internet-perustaiseen ohjaukseen osallistuneiden potilaiden tiedon taso ja kokemus tiedon riittävyydestä lisääntyivät ohjauksen jälkeen enemmän kuin sairaanhoitajan välittämään potilasohjaukseen osallistuneiden potilaiden tiedot. Ohjausmuodolla ei ollut vaikutusta potilaiden kokemien tunteiden ja oireiden voimakkuuteen. Yhteenvetona voidaan todeta, että tiedollisesti voimavaraistava Internet-perustaista ohjausta voidaan suositella vaihtoehtoiseksi menetelmäksi sairaanhoitajan välittämälle ohjaukselle päiväkirurgiseen ortopediseen leikkaukseen tuleville potilaille.

Airway surgery for obstructive sleep apnea and partial upper airway obstruction during sleep

This study analyzed the feasibility and efficacy of surgical therapies in patients with sleep-disordered breathing ranging from partial upper airway obstruction during sleep to severe obstructive sleep apnea syndrome. The surgical procedures evaluated were tracheostomy, laser-assisted uvulopalatoplasty (LUPP) and uvulopalatopharyngoplasty (UPPP) with laser or ultrasound scalpel. Obstructive sleep apnea and partial upper airway obstruction during sleep were measured with the static charge-sensitive bed (SCSB) and pulse oximeter. The patients with severe obstructive sleep apnea syndrome were treated with tracheostomy. Palatal surgery was performed only if the upper airway narrowing occurred exclusively at the soft palate level in patients with partial upper airway obstruction during sleep. The ultrasound scalpel technique was compared to laser-assisted UPPP. The efficacy of LUPP to reduce partial upper airway obstruction during sleep was assessed and histology of uvulopalatal specimen was compared to body fat distributional parameters and sleep study findings. Tracheostomy was effective therapy in severe obstructive sleep apnea. Partial upper airway obstruction and arterial oxyhemoglobin desaturation index during sleep decreased significantly after LUPP. The minimal retropalatal airway dimension increased and soft palate collapsibility decreased at the level where the velopharyngeal obstruction had occurred before the surgery. Ultrasound scalpel did not offer any significant benefits over the laser-assisted technique, except fewer postoperative haemorrhage events. The loose connective tissue as a manifestation of edema was the only histological finding showing correlation with partial upper airway obstruction parameters of SCSB. Tracheostomy remains a life-saving therapy and also long-term option when adherence to CPAP fails in patients with obstructive sleep apnea syndrome. LUPP effectively reduces partial upper airway obstruction during sleep provided that obstruction at the other levels than the soft palate and uvula were preoperatively excluded. Technically the ultrasound scalpel or laser surgeries are equal. In patients with partial upper airway obstruction the loose connective tissue is more important than fat accumulation in the soft palate. This supports the hypothesis that edema is a primary trigger for aggravation of upper airway narrowing during sleep at the soft palate level and evolution towards partial or complete upper airway obstruction during sleep.

Anaesthesia and Pain Management for Use in Orthopaedic Day Surgery

Day surgery has gained a large popularity during the last decades. In Finland, 57% of the elective procedures, and 50% at Turku University Hospital, were already conducted on day basis during 2012. The steady growth of day surgery is mostly due to an increased safety in perioperative care and cost-effectiveness. The development of surgical techniques and anaesthetic methods has advanced the modern day surgery and extended the repertory of the procedures for use in day surgery operations. Day surgery also offers certain benefits like reduced risk for hospital-related infections, stress and confusion. Patient satisfaction, regarding several issues, is high. Most concerns and complaints are related to postoperative pain, nausea and vomiting pain and nausea. Pain can hamper recovery and pain management is a crucial factor for hospital discharge. Appropriate pain treatment is effective, safe, easy and economical. A procedure-specific approach and an individually planned, multimodal analgesia should be the basis of modern pain management. The main aim of this thesis was to evaluate the effectiveness and safety of anaesthetic technique and methods in pain treatment of orthopaedic day case surgery, and following conclusions were made. Unilateral spinal block was achieved using hyperbaric bupivacaine with a small dose of clonidine but clonidine prolonged the block. Continuous subacromial bupivacaine was found to be safe but conferring only moderate efficacy in pain care after shoulder arthroscopy. Transdermal fentanyl, 12 g/h, as part of multimodal analgesia, offered a safe and easy option to pain management in this patient group. However, after forefoot surgery, it did not reduce pain any further. In general, pain scores in all patient groups were low and the need for rescue opioid moderate.

Bariatric and Post-Bariatric Surgery: from Metabolic Surgery to Plastic Surgery Indications

Background: Controversy exists concerning indications and outcomes of major bariatric surgery procedures. Massive weight loss after bariatric surgery leads to excess skin with functional and aesthetic impairments. The aim of this study was to investigate the major bariatric surgery procedures and their outcomes in two specific subgroups of morbidly obese patients, ≥55-year-olds and the superobese. Further aims were to evaluate whether the preoperative weight loss correlates with laparoscopic gastric bypass complications. The prevalence and impact of excess skin and the desire for body contouring after bariatric surgery were also studied. Patients and Methods: Data from patients who underwent Laparoscopic Adjustable Gastric Banding (LAGB) and Laparoscopic Roux-en-Y Gastric Bypass (LRYGB) at Vaasa Central Hospital were collected and postoperative outcomes were evaluated according to the BMI, age and preoperative weight loss. Patients who had undergone bariatric surgery procedures were asked to complete a questionnaire to estimate any impairment due to redundant skin and to analyse each patient’s desire for body contouring by area. Results: No significant difference was found in operative time, hospital stay, or overall early postoperative morbidity between LAGB and LRYGB. Mean excess weight loss percents (EWL%) at 6 and 12 months after LRYGB were significantly higher. A significant difference was found in operative time favouring patients <55 years. Intraoperative complications were significantly more frequent in the group aged >55 years. No significant difference was detected in overall postoperative morbidity rates. A significant difference was found in operative time and hospital stay favouring all patients who lost weight preoperatively. Most patients reported problems with redundant skin, especially on the abdomen, upper arms and rear/buttocks, which impaired daily physical activity in half of them. Excess skin was significantly associated with female gender, weight loss and ΔBMI. Patients with a WL >20 kg, ΔBMI ≥10 kg/m2 and an EWL % > 50 showed a significantly surplus skin discomfort (p < 0.001). Most patients desired body contouring surgery, with high or very high desire for waist/abdomen (62.2%), upper arm (37.6%), chest/breast (28.3%), and rear/buttock (35.6%) contouring. Conclusions: LRYGB is effective and safe in superobese (BMI >50) and elderly (>55 years) patients. A preoperative weight loss >5% is recommended to improve the outcomes and reduce complications. A WL >20 kg, ΔBMI ≥10 kg/m2 and an EWL % > 50 are associated with a higher functional discomfort due to redundant skin and to a stronger desire for body contouring plastic surgery.

Defining the keyhole modes – the effects on the weld geometry and the molten pool behaviour in high power laser welding of stainless steels

Keyhole welding, meaning that the laser beam forms a vapour cavity inside the steel, is one of the two types of laser welding processes and currently it is used in few industrial applications. Modern high power solid state lasers are becoming more used generally, but not all process fundamentals and phenomena of the process are well known and understanding of these helps to improve quality of final products. This study concentrates on the process fundamentals and the behaviour of the keyhole welding process by the means of real time high speed x-ray videography. One of the problem areas in laser welding has been mixing of the filler wire into the weld; the phenomena are explained and also one possible solution for this problem is presented in this study. The argument of this thesis is that the keyhole laser welding process has three keyhole modes that behave differently. These modes are trap, cylinder and kaleidoscope. Two of these have sub-modes, in which the keyhole behaves similarly but the molten pool changes behaviour and geometry of the resulting weld is different. X-ray videography was used to visualize the actual keyhole side view profile during the welding process. Several methods were applied to analyse and compile high speed x-ray video data to achieve a clearer image of the keyhole side view. Averaging was used to measure the keyhole side view outline, which was used to reconstruct a 3D-model of the actual keyhole. This 3D-model was taken as basis for calculation of the vapour volume inside of the keyhole for each laser parameter combination and joint geometry. Four different joint geometries were tested, partial penetration bead on plate and I-butt joint and full penetration bead on plate and I-butt joint. The comparison was performed with selected pairs and also compared all combinations together.

Effects of Obesity and Weight Loss Following Bariatric Surgery on Brain Function, Structural Integrity and Metabolism

Obesity is one of the key challenges to health care system worldwide and its prevalence is estimated to rise to pandemic proportions. Numerous adverse health effects follow with increasing body weight, including increased risk of hypertension, diabetes, hypercholesterolemia, musculoskeletal pain and cancer. Current evidence suggests that obesity is associated with altered cerebral reward circuit functioning and decreased inhibitory control over appetitive food cues. Furthermore, obesity causes adverse shifts in metabolism and loss of structural integrity within the brain. Prior cross-sectional studies do not allow delineating which of these cerebral changes are recoverable after weight loss. We compared morbidly obese subjects with healthy controls to unravel brain changes associated with obesity. Bariatric surgery was used as an intervention to study which cerebral changes are recoverable after weight loss. In Study I we employed functional magnetic resonance imaging (fMRI) to detect the brain basis of volitional appetite control and its alterations in obesity. In Studies II-III we used diffusion tensor imaging (DTI) and voxel-based morphometry (VBM) to quantify the effects of obesity and the effects of weight loss on structural integrity of the brain. In study IV we used positron emission tomography (PET) with [18F]-FDG in fasting state and during euglycemic hyperinsulinemia to quantify effects of obesity and weight loss on brain glucose uptake. The fMRI experiment revealed that a fronto-parietal network is involved in volitional appetite control. Obese subjects had lower medial frontal and dorsal striatal brain activity during cognitive appetite control and increased functional connectivity within the appetite control circuit. Obese subjects had initially lower grey matter and white matter densities than healthy controls in VBM analysis and loss of integrity in white matter tracts as measured by DTI. They also had initially elevated glucose metabolism under insulin stimulation but not in fasting state. After the weight loss following bariatric surgery, obese individuals’ brain volumes recovered and the insulin-induced increase in glucose metabolism was attenuated. In conclusion, obesity is associated with altered brain function, coupled with loss of structural integrity and elevated glucose metabolism, which are likely signs of adverse health effects to the brain. These changes are reversed by weight loss after bariatric surgery, implicating that weight loss has a causal role on these adverse cerebral changes. Altogether these findings suggest that weight loss also promotes brain health.Key words: brain, obesity, bariatric surgery, appetite control, structural magnetic resonance

Effect of bariatric surgery on adipose tissue distribution in severely obese patients

Background and aim: Bariatric surgery leads to sustain weight loss, improve metabolic and lipids profiles and ultimately leads to remission of type 2 diabetes (T2DM) in some obese individuals. The aim of the project is to evaluate the effect of bariatric on abdominal fat distribution in severely obese T2DM and non-T2DM obese patients. Study design and methods: A total of 23 morbidly obese subjects (mean ± SD body mass index 43.0 ± 3.6 kg/m2, age 46.5 ± 9.0 years) were recruited from the lager multicenter SLEEVEPASS studies (ClinicalTrials.gov/NCT00793143). 10 healthy age-matched non-obese individuals served as controls. The obese patients were studied before and 6 months after surgery. At baseline, there were 9 T2DMs and 14 non-diabetics. After surgery, there were 5 remitters and 4 nonremitters. Whole body magnetic resonance imaging including the abdominal regions was performed for the obese subjects before and 6 months after surgery and for the controls once. Abdominal fat were compartmentalized and analyzed. Results: At 6 months of follow-up, BMI in the obese decreased significantly (from 43 ± 4 to 33 ± 2 kg/m2, p < 0.001) with substantial improvement in whole body insulin sensitivity (from 12.2 ± 5.7 to 23.3 ± 8.1 µmol/kg/min, p < 0.001). Intraperitoneal fat mass decreased by 46% (from 3.4 ± 1.1 to 1.9± 1.0 kg, p < 0.001) more than the rest of the compartments. Abdominal visceral compartments in obese correlated with glycemic status independent of surgery. Pre-surgery posterior deep and intraperitoneal fat mass were better predictors of post-surgery glycemic status in obese. Remitters showed significant improvement in whole body insulin sensitivity (from 9.1 ± 2.1 to 20.9 ± 8.4 µmol/kg/min, p = 0.02), fasting glucose decreased significant only in nonremitters (from 7.1 ± 1.1 to 6.0 ± 0.8 mmol/l, p = 0.05) after surgery. There were no differences in extraperitoneal fat mass in remitters and superficial subcutaneous fat in non-remitters but all other compartments decreased significantly 6 months after the surgery Conclusion: Both deep subcutaneous and visceral fat are important contributors to glycemic status in obese subjects. Whereas visceral fat compartments are directly involved in T2DM, superficial subcutaneous may have offered protection against T2DM in obese subjects.

Continuity of patient care in day surgery

Continuity is a part of high-quality patient care. The purpose of this study was to analyse what factors are important in the continuity of patients’ care, and how well continuity is achieved in different stages of the care of day surgical patients. Day surgery has become significantly more prevalent in the past few decades, and in order for it to be carried out successfully, continuity in care is particularly essential. The study was carried out in two stages. In the first stage (2001–2005) of the study, continuity was examined through a review of literature from the perspective of critical pathways, naming the continuity categories of time flow, coordination flow, caring relationship flow, and information flow. The first stage also entailed an analysis of matters important to the patient and problems concerning the achievement of care continuity, carried out by interviewing 25 day surgical patients. In the second stage (2006–2015), the degree to which the continuity of day surgical patient care was achieved was analysed from the perspective of patients (n=203, 58%) and nurses working in day surgery units (n=83, 69%), and suggestions for developing the continuity of day surgery patient care were made. In this study continuity of care was examined through a review of literature from the perspective of critical pathways, naming the continuity categories of time flow, coordination flow, caring relationship flow, and information flow. Within these categories, several important factors for the patient were found. According to both patients and nurses, continuity of care is generally achieved to a high degree. Continuity of care is improved by patients being acquainted with and meeting the staff attending to them (nurse and surgeon) before and after the operation. From patients’ perspective, there is room for improvement especially in terms of being admitted to care and in the carer-patient relationship. From nurses’ perspective, there is room for improvement in terms of the smoothness of care. Nurses evaluated the continuity of care to be the least successful before and after the operation. An extensive social and health care reform is planned in Finland in the coming years, aiming to enhance social and health care services and to create smoothly functioning service and care. As a topic of further study supporting the development of the service system, it is important to follow the patient’s progress throughout the entire chain of care, e.g. as a case study. On the other hand, there is also a need to study the views of nurses and other health care professionals in health care, e.g. in primary health care.